When copying parameters into payload buffer, it is possible
that after copying a string over, the pointer to buffer is
no longer aligned on 4 or 8 bytes. And some toolchains may
decide to treat the copy as aligned since the values being
copied are 4 or 8 bytes. This results in unaligned memory
access and hardware exception. So change the copy to memcpy
to avoid potential unaligned access.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The RTT backend of the shell does not support several of the more
advanced terminal features. This commit proposes to inactivate these
features by default when RTT is selected as shell backend.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
When CONFIG_PM_DEVICE is enabled IPC Device may be during power transition
during a call to intel_adsp_ipc_send_message function.
Changed signatures of intel_adsp_ipc_send_message and its sync version
to return int and negative error codes on error.
On attempt to send IPC message during Device power transition
-ESHUTDOWN error code is returned, on busy state -EBUSY.
Updated all function references.
Signed-off-by: Andrey Borisovich <andrey.borisovich@intel.com>
The BLE backend has a bug that when the MTU size is less than
the buffer the notification always fails and does not allow
to flush the buffer.
This fix checks for the MTU size of the current connection
and adjusts it. In addition, the buffer size is no longer
settable by the user and depends on the transmission size
of MTU set with CONFIG_BT_L2CAP_TX_MTU.
Signed-off-by: Victor Chavez <chavez-bermudez@fh-aachen.de>
This adds a few line use zephyr_syscall_header() to include
headers containing syscall function prototypes.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Log level is stored on 3 bits thus in theory it can be set to 7
and yet accepted levels are up to 4 thus Coverity complains.
Adding assert that prevents use of levels above 4.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
atomic_inc(&buffered_cnt) return previous count of log messages,
should use current count to compare with threshold config value.
Signed-off-by: Dong Wang <dong.d.wang@intel.com>
Signed-off-by: Qipeng Zha <qipeng.zha@intel.com>
Until now iterable sections APIs have been part of the toolchain
(common) headers. They are not strictly related to a toolchain, they
just rely on linker providing support for sections. Most files relied on
indirect includes to access the API, now, it is included as needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Clean up log_const to utilize macros for handling sections.
Update database_gen.py to match naming convention change.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
MISRA Rule 5.7 requires uniqueness of tag identifiers. Shell is
frequently problematic because many code uses `const struct shell
*shell`. This causes CI noise every time one of these shell files is
edited, so let's update all of them with `const struct shell *sh`
instead.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The arm-clang compiler/linker does not optimize away unused function
symbols and thus will error if symbols that are referenced are not
defined. To fix this add needed ifdef'ry.
Fixes#56630Fixes#56628
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
The init infrastructure, found in `init.h`, is currently used by:
- `SYS_INIT`: to call functions before `main`
- `DEVICE_*`: to initialize devices
They are all sorted according to an initialization level + a priority.
`SYS_INIT` calls are really orthogonal to devices, however, the required
function signature requires a `const struct device *dev` as a first
argument. The only reason for that is because the same init machinery is
used by devices, so we have something like:
```c
struct init_entry {
int (*init)(const struct device *dev);
/* only set by DEVICE_*, otherwise NULL */
const struct device *dev;
}
```
As a result, we end up with such weird/ugly pattern:
```c
static int my_init(const struct device *dev)
{
/* always NULL! add ARG_UNUSED to avoid compiler warning */
ARG_UNUSED(dev);
...
}
```
This is really a result of poor internals isolation. This patch proposes
a to make init entries more flexible so that they can accept sytem
initialization calls like this:
```c
static int my_init(void)
{
...
}
```
This is achieved using a union:
```c
union init_function {
/* for SYS_INIT, used when init_entry.dev == NULL */
int (*sys)(void);
/* for DEVICE*, used when init_entry.dev != NULL */
int (*dev)(const struct device *dev);
};
struct init_entry {
/* stores init function (either for SYS_INIT or DEVICE*)
union init_function init_fn;
/* stores device pointer for DEVICE*, NULL for SYS_INIT. Allows
* to know which union entry to call.
*/
const struct device *dev;
}
```
This solution **does not increase ROM usage**, and allows to offer clean
public APIs for both SYS_INIT and DEVICE*. Note that however, init
machinery keeps a coupling with devices.
**NOTE**: This is a breaking change! All `SYS_INIT` functions will need
to be converted to the new signature. See the script offered in the
following commit.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
init: convert SYS_INIT functions to the new signature
Conversion scripted using scripts/utils/migrate_sys_init.py.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
manifest: update projects for SYS_INIT changes
Update modules with updated SYS_INIT calls:
- hal_ti
- lvgl
- sof
- TraceRecorderSource
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: devicetree: devices: adjust test
Adjust test according to the recently introduced SYS_INIT
infrastructure.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: kernel: threads: adjust SYS_INIT call
Adjust to the new signature: int (*init_fn)(void);
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Added using LOG_DEFAULT_LEVEL kconfig option in log module
template for assigning the default log level to newly created
module instance, instead of assuming always INFO level.
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
This feature adds support for using a custom function to format
the timestamp used for all logging backends. When the kconfig
option LOG_OUTPUT_FORMAT_CUSTOM_TIMESTAMP is set the custom
formatting function will always be used.
Signed-off-by: Hein Wessels <heinwessels93@gmail.com>
There was a bug in the BLE backend when it was the only enabled
backend. Instead of using the API `log_backend_activate` to
activate the backend, the logger requires the first time to be
enabled with `log_backend_enable`.
Signed-off-by: Victor Chavez <chavez-bermudez@fh-aachen.de>
Added a new logger backend to recieve data over a BLE
notification characteristic.
The characteristic is based on the UUID from the Nordic connect SDK
service NUS, which allows to have a UART shell over BLE.
The idea behind this, is that this logger can be used directly
with the NRF apps or any other BLE UART terminal app.
Signed-off-by: Victor Chavez <chavez-bermudez@fh-aachen.de>
We get compile warnings of the form:
drivers/console/uart_console.c:508:8: error: converting the result of
'<<' to a boolean; did you mean
'((__aeabi_ctype_table_ + 1)[(byte)] << 28) != 0'?
[-Werror,-Wint-in-bool-context]
if (!isprint(byte)) {
^
Since isprint returns an int, change check to an explicit test against
the return value.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Package length was previously stored on 10 bits which limited
package size to 1023 bytes. Descriptor which contained package
length field had one unused bit which can be used to increase
package length field to 11 bits doubling the maximum package
length.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
When packacge exceeds the limitation warning log is printed
and message is dropped.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Some internal macros were still using 2 suffix which comes from
time when there was v1 and v2. Cleaning up by removing the suffix.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Combining CONFIG_LOG_OUTPUT_FORMAT_LINUX_TIMESTAMP and
CONFIG_LOG_TIMESTAMP_64BIT results in a wrong timestamp, as the
Linux timestamp format print call assumes a 32 bit variable for
the seconds. Fix it by using a different print format for 64 bit
timestamps.
Fixes: #55372
Signed-off-by: Martin Sollie <ms@aziwell.no>
Handling panicking while in an ISR. Instead of attempting to call
`pm_device_get` for each character, ensure that the hardware is enabled
when `log_panic` is called.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Allow the log_backend_uart char_out implementation to integrate with
'Device Runtime Power Management'.
Without using runtime PM, it is impossible for the application to manage
the power state of a UART instance, given that any module in the
application could theoretically LOG_* or printk at any point in time.
This removes the need to manually call `pm_device_state_set` when the
lowest power states must be reached, while still allowing log messages
to be output.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
A fix to accept valid shell commands of the form `log backend
shell_rtt_backend disable`, i.e. to affect all modules when no modules are
specified.
Signed-off-by: Marco Argiolas <marco.argiolas@ftpsolutions.com.au>
The backend_name_get() function always sets 'entry->syntax' to
the name of the last backend, but a calling function iterates
over the idx until 'entry->syntax' is null.
Solution: Added a check that the index is less than the number
of backends and added getting the name of the backend
by the given index.
Signed-off-by: Mikhail Siomin <victorovich.01@mail.ru>
Array 'days_in_month' of size 12 may use index value bigger then
count of its elements.
Signed-off-by: PawelX Dobrowolski <pawelx.dobrowolski@intel.com>
Add reset of buffered messages counter to the initialization function.
It is for testing purposes sinces in the application logging is
initialized only once.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
If k_malloc() of filters fails in log_mgmt.c:link_filters_init(),
return an error and do not rely on the __ASSERT(0).
If __ASSERT_ON==0 in the build, assert will not trigger and
code will proceed to execute
memset(NULL, 0, sizeof(uint32_t) * total_cnt);
Avoid this by returning -ENOMEM on error.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
There are scenarios when it is necessary to globally redefine
a log macro. The existing logging frontend is not sufficient since
it redirects at the function level.
One example is using pigweed_tokenzier. The pigweed tokenizer depends
on intercepting log strings at the macro level to function.
Introduce an option to include a custom application provided header
named "zephyr_custom_log.h" at the end of log.h. This allows an
application to extend the LOG_* macros globally.
This change includes a simple test that redefines the core LOG macros
to include a custom prefix.
Signed-off-by: Rob Barnes <robbarnes@google.com>
As written, the title and description of the Kconfig option seem to
specify the logging sub-system will not flush until the buffer is full.
Someone reading this would expect that shorter log message will not be
flushed until the specified number of bytes accumulate.
This is not the case. Each log message is flushed when finished. The
size is only the maximum bytes of a single formatted message's contents
that will be accumated before the backend flushes.
What's more, it only applies in deferred mode. In immediate mode there
is no buffering, not just of multiple log messages but also of the
message contents as they are formatted.
Signed-off-by: Trent Piepho <tpiepho@gmail.com>
Users may want to do some configuration after the kernel is up, but
before initializing the log_core. Making the log_core's init priority
configurable makes that possible.
Signed-off-by: Ian Oliver <io@amperecomputing.com>
This changes the minimal logging Kconfig to select printk rather
than imply it, this is because if someone turns printk off,
minimal footprint logging does not work, therefore it needs to be
a requirement.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This allows putting the UART backend on a serial device that has to be
quiet unless logging is explicitly enabled at runtime.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
Add a new Kconfig template that allow log modules to inherit their log
level from their parent module.
For example, the logs used in the Bluetooth audio like
`BT_AUDIO_STREAM_LOG_LEVEL` can inherit their level from
`BT_AUDIO_LOG_LEVEL`.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
This change will enable the logging system to handle printk() calls by
default if printk support is enabled, which improves output resiliency
when logging, mcumgr and printk calls are used. Will disable keep
LOG_PRINTK disabled for tests which are not using the new API as
moving to LOG_PRINTK causes test data to be output to a different UART
in the old test system.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Renamed the dma-buf-alignment field to a more explicit
and descriptive name dma-buf-addr-alignment.
Signed-off-by: Adrian Warecki <adrian.warecki@intel.com>
This configuration option gives the possibility to not enable
the fs backend on startup.
Backend can be enabled in runtime using log_backend_init and
log_backend_enable functions.
Implementation is based on log_backend_net.
Signed-off-by: Wojciech Slenska <wsl@trackunit.com>
Added link that sends messages over ipc_service. It uses
log_link_remote and will talk to log_backend_ipc_service based
on log_link_backend.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added backend that sends messages over ipc_service. It uses
log_backend_remote and will talk to log_link_ipc_service based
on log_link_remote.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added implementation of link and backend that are intended to
complement each other. Both requires transport function hooks
to be provided.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add support to multidomain case where source field contains
ID and not address of the source structure.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
