Allows the application to force the use of an NRPA.
This is applied regardless of any other roles running (ie scanner) or
advertising type.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Co-authored-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Increaing mesh scan window in order to reduce the number
of messages colliding into scan window end which happens
every 30ms currently. Increasing the window to 3000ms in
order to improve performance.
Keeping 30ms window only for legacy advertiser support.
Signed-off-by: Alperen Sener <alperen.sener@nordicsemi.no>
This fixes missing `static` function specifier.
The bt_att_chan_create_pdu is not called outside of att.c.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Updates the handling of incoming seg ack messages to comply with
the mesh protocol specification, section 3.5.3.3.2 and section
3.5.3.3.3.
Previous implementation did not restart the retransmission timer unless
the incoming ack contained at least one segment newly marked as
acknowledged. According to the spec, the timer should be restated
regardless. The implementation depends on the retransmission
timer to end the transmission early if there was no more retransmission
attempts. Checks have been added to ensure that this now happens
immediately.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
In discover_next_instance coverity did not consider the
ASSERT and warns about possibly dereferecing current_inst
which could be NULL. Modifed the code slightly to make
Coverity happy.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The Codec Specific Configuration Parameters provided by server was
not copied at bt_ascs_config_ase. Detected by PTS in BAP/USR/SCC PTS
test cases, because no LTV values appeared in ASE Codec Configured
notification.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
Updated SAR default values to align with the latest mesh 1.1 drafts,
and relevant Bsim tests.
Signed-off-by: Stine Åkredalen <stine.akredalen@nordicsemi.no>
Modified bt_cap_stream_ops_register to always register BAP callbacks
to ensure that the callbacks are always forwarded (unless later
overwritten by the application...)
The CAP Initiator Unicast will still register the callbacks itself,
to ensure that the unicast procedures still work even if
bt_cap_stream_ops_register was never called.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When a CIS is established for the peripheral, then not all
QOS values are completely valid as they are simply missing
from the CIS established event. This commit updates the
missing fields based on the QOS settings provided by the
BAP Unicast Client during QoS Configuration of the endpoint.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This intoduces dedicated Kconfig option to enable TBS client,
that makes the configuration more intuitive.
While configuring GTBS only, the user does not have to explicitly set
the BT_TBS_CLIENT_MAX_TBS_INSTANCES to 0 to disable the TBS client
functionality.
This adds also `tbs_only_client` test case to test the TBS only build
option.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This improves the code readability and reduces flash usage a bit by
spliting up GTBS from other TBS instances in bt_tbs_server_inst
structure, so that some of the code could be conditionally compiled
out.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This adds handling of ASE control point operations in separate thread
so that the notifications of ASE state changes are sent from non-BT
thread. This ensures bt_gatt_notify_cb to be blocking waiting for
available buffers to send the notifications.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Add CAP shell commands for starting specific audio configurations
based on the BAP specification.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit adds missing tx power config options for nRF53x SoCs, as
well as the missing Radio defines for nRF53x SoCs.
Signed-off-by: Kyra Lengfeld <kyra.lengfeld@nordicsemi.no>
Adds callback API for the following config client status messages:
- Composition data status
- Model publication status
- SIG model subscription list
- Vendor model subscription list
- Netkey list
- Appkey list
- SIG model app list
- Vendor model app list
- Key refresh status
- Heartbeat publication status
- Heartbeat subscription status
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
The BAP stream object should not have a dir field. The
dir field should be stored in the EP only (to avoid having two
fields storing the same value, causing possible issues).
The field was removed, and the places that use it has been updated.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add support for transmitting on multiple streams, e.g.
with the simple `send` command or with the sine generator.
This extends the start and stop sine to take a "all"
paramter to start sending on all streams.
This also fixes an issue with the seq_num when multiple
streams are transmitting, since the timing may get delayed
which then delays the seq_num which are then scheduled too late.
The fix here is to only use the timer for the inital sequence
number when starting to send the sine way, and then increment it
per TX.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Some controllers support additional connection parameter ranges
beyond what is described in the specification. Enabling this new option
allows the application to set any value to all connection parameters.
Tbe Host will perform no limits nor consistency checks on any of the
connection parameters (conn interval min and max, latency and timeou).
However, the Host will still use numerical comparisons between the
min and max connection intervals in order to verify whether the
desired parameters have been established in the connection.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This fixes invalid memset of QoS parameters that may happen if Config
Qos operation is requested on ASE in QoS Configured state. In such case
if the requested parameters have been rejected, the ASE QoS parameters
shall remain unchanged (were memset instead). Otherwise, the stack shall
send QoS Configured state notification with cleaned up parameters (all
zero's) which was not done.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Fixes erroneous packing/unpacking of model app list messages
in the configuration client and server. According to the mesh 1.1
protcol spec (4.3.1.1) two app indexes shall be packed in a 3 octet
interleaved format. The current implementation packs them in 4 octets.
This commit also provide a helper function for unpacking key indexes
as public API to facilitate future config model callback API.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Adds a comment stating the state of the peripheral SDU size
and why it is being assigned the PDU size on CIS established.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
According spec, for the same iv index, iv update flag
should trans to false, when iv update procedure complete.
When local environment has attack-node
to store old network beacon(1,1), and re-send same
network beacon(1,1) after 192hours, will cause whole
bluetooth mesh network broke.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
OOB information should be in little endian in scan report messages.
URI hash should be retrieved as it is from unprovisioned device beacon
and encoded likewise into scan report messages like we do for UUID.
Signed-off-by: Alperen Sener <alperen.sener@nordicsemi.no>
This fixes possible ASE leak in bt_ascs_config_ase in case
ascs_ep_set_codec function returns an error.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This removes code duplicates.
ASE Disable operation handler has been refactored by providing the
`rsp` pointer as one of the function parameters. ascs_cp_rsp_add is
not called from ase_disable explicitly, so the contents of the
response buffer are not changed in case the ase_disable is called
from non control point context.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This removes code duplicates.
The ASE Release operation handler has been refactored by moving the state
validation check to the ase_release function body and providing the
`rsp` pointer that is later filled. ascs_cp_rsp_add is not called from
ase_release explicitly, so the contents of the respons buffer are not
changed in case the ase_release is called from non control point context
e.g. `disconnected` callback.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This moves copying of parameters after application return value
validation so that the metadata is not stored if rejected.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Merging the two structs cleans up significant amount of code
and makes it easier to expand later.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Previously the calculation of the PSN was done using
just a timer. This would not work correctly when
attempting to send multiple packets in a single SDU
interval (e.g. to enqueue 2 or more).
Previously we only ever attempted to send 1 packet in
the `sent` callback but scheduling the work item. However
in the case that the `sent` callback was called twice
before the work item had been triggered (possible due
to the priority of the RX thread being higher than the
system workqueue thread). This has been modified so that
if we can enqueue more packets in the lc3_audio_send_data
function, we re-enqueue the work item. We re-enqueue rather
than sending multiple in a single call to avoid blocking
other items on the system workqueue from being scheduled.
This could cause possible missed intervals (if other workqueue
items are processed), but it should be OK from a ISO perspective,
and the new PSN calculator handles this much better.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modify lc3_audio_send_data to be triggered on a delayable
k_work so that we can retry it with a delay if it fails for whatever
reason.
This also moves the calculation of the seq_num closer
to when it is used, which makes sense as it is based on
a timed calculation.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The current API for changing the bondable mode uses the global flag.
With Zephyr support for multiple Bluetooth identities, the API for
changing the bondable mode should be more fine-grained.
The bondable requirements of one identity should not have an impact on
another identity which can have a different set of requirements.
This change introduces function to overlay bondable flag per
connection.
Signed-off-by: Mateusz Kapala <mateusz.kapala@nordicsemi.no>
Current structure of Bluetooth Mesh Kconfig options is quite messy.
This makes impossible to understand which configuration belongs to
which feature. Especially when using interactive Kconfig interface, like
menuconfig or guiconfig.
This commit restructures the options grouping them by protocol layer
they belong to (Network, Transport, Access, etc.), or specific feature
(LPN, Friend, Proxy, Relay, etc.), or implementation (Advertiser, Shell,
Persistent storage). Amount of supported keys, subnets, group addresses
and labels are grouped under Capabilities menu. Generic options that
don't fall to any category are kept at the root menu. For better
visibility, if a specific feature or layer has more than 1 option, they
are hidden under menu.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
PR adds the statistic module to estimate frame handling.
The module helps to understand the ratio of
the received\relayed\dropped\transmited frames.
That shows the efficiency of the current configuration\implementation.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The broadcast_id and the pa_sync fields should be set before calling
broadcast_sink_add_src as broadcast_sink_add_src will those values to
compare against other receive states.
The function was also missing a call to broadcast_sink_cleanup
for the newly allocated sink in case there was an error.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The CIG state variable is set to CIG_STATE_CONFIGURABLE, but then
cleared by memcpy from configuration cache. Set state after memcpy.
Fixes EBQ test /HCI/CIS/BI-10-C.
Signed-off-by: Morten Priess <mtpr@oticon.com>
