Use the ISO Data sent callback in iso_broadcast sample to
synchronize the ISO data send. ISO Data sent callback is
generated every SDU interval corresponding to the number of
completed packets event generated by the Controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove usage of Kconfig symbol `CONFIG_BT_DEBUG_LOG` from samples. It
has been deprecated since this PR:
https://github.com/zephyrproject-rtos/zephyr/pull/56183
The Kconfig symbols has been replaced by `CONFIG_LOG=y` on most of the
cases. Or it has been removed when not needed anymore.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Twister now supports using YAML lists for all fields that were written
as space-separated lists. Used twister_to_list.py script. Some artifacts
on string length are due to how ruamel dumps content.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use BT_CONN_TX_USER_DATA_SIZE when defining pools of buffers that will go
through `bt_conn_send_cb()`.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
As both C and C++ standards require applications running under an OS to
return 'int', adapt that for Zephyr to align with those standard. This also
eliminates errors when building with clang when not using -ffreestanding,
and reduces the need for compiler flags to silence warnings for both clang
and gcc.
Most of these changes were automated using coccinelle with the following
script:
@@
@@
- void
+ int
main(...) {
...
- return;
+ return 0;
...
}
Approximately 40 files had to be edited by hand as coccinelle was unable to
fix them.
Signed-off-by: Keith Packard <keithp@keithp.com>
Add kconfig to let the ISO broadcast and ISO receive samples report
packets no more than once per set interval of packets.
Signed-off-by: Frode van der Meeren <frode.vandermeeren@nordicsemi.no>
Remove duplicated board specific conf file for iso_broadcast
and iso_receive samples. Instead, have an overlay conf file.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
- Include ISO stream count in ISO streams definitions in
controller.
- Create ISOAL source on controller when ISO data path is
setup.
- Send broadcast data buffers transferred from host over
HCI to ISOAL as ISO SDU fragments.
- Allow bot conn and ISO data to use data_buf_overflow.
- Store ISO interval during BIG create.
- Remove ISO data path for each BIS during BIG terminate
procedure.
- Set value (temporarily) for ISOAL target_event enabling
it to Tx data.
- Check status of data fragment sent to ISOAL for memory
allocation and other errors.
- Destroy ISOAL source when ISO stream released.
- Use ISO Advertising handle, not stream handle to destroy
ISO data path.
- Remove extra ISOAL sink destroy call when removing ISO
data path.
- Add FIXME comment as reminder to address LL_ASSERT on
isoal_status error.
Signed-off-by: Carl Stehle <droid@appception.com>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
integration_platforms help us control what get built/executed in CI and
for each PR submitted. They do not filter out platforms, instead they
just minimize the amount of builds/testing for a particular
tests/sample.
Tests still run on all supported platforms when not in integration mode.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The sequence number is by the core spec defined as 16-bit.
We had implemented a workaround for the wrapping of the
sequence number, which required the type to be larger
than 16-bit (32-bit).
However, since the definition of the sequence number,
and the use of, is poorly defined by the core spec, we
are reverting this workaround and reducing the sequence
number to 16-bit again. This way it is more in line
with the core spec, as well as more intuitive given the
other uses for the sequence number.
This change moves the responsibility of using the
right value to the upper layers, as the stack can
and will no longer provide any guarantees.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix the iso_broadcast and iso_receive sample to wait on
semaphore for all channel establishment and all channel
terminate callbacks to be invoked.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Increase the ISO Tx Buffers to avoid throttling of ISO data
transmission when using 2 Broadcast ISO streams.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The timeout was accidentally changed from 60 seconds
to 0.6 seconds.
This commit also fixes the number of prints, since we are now
sending at 10ms intervals.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add two new parameters to bt_iso_chan_send:
sn: The packet sequence number which shall be incremeted
per SDU interval.
ts: An optional timestamp value used to synchronize SDUs.
The sequence number in the API uses a 32-bit value even though
the sequence number for the HCI command is 16-bit. This is to
properly handle wrapping of sequence numbers, which is much
easier to do with additional bits allocated.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remove the explicit enable of Extended and Periodic
Advertising support in Controller, the feature is no
longer experimental in the Controller and is now enabled
by default when application uses them by enabling as
Host feature.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In order to bring consistency in-tree, migrate all samples to the use
the new prefix <zephyr/...>. Note that the conversion has been scripted:
```python
from pathlib import Path
import re
EXTENSIONS = ("c", "h", "cpp", "rst")
for p in Path(".").glob("samples/**/*"):
if not p.is_file() or p.suffix and p.suffix[1:] not in EXTENSIONS:
continue
content = ""
with open(p) as f:
for line in f:
m = re.match(r"^(.*)#include <(.*)>(.*)$", line)
if (m and
not m.group(2).startswith("zephyr/") and
(Path(".") / "include" / "zephyr" / m.group(2)).exists()):
content += (
m.group(1) +
"#include <zephyr/" + m.group(2) +">" +
m.group(3) + "\n"
)
else:
content += line
with open(p, "w") as f:
f.write(content)
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add reference to specific CONFIG_BT_CTLR_ Kconfig options
for the ISO samples. This is due to the fact that ISO
isn't fully supported in the Zephyr controller yet, and
won't be enabled by default for a while yet.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Update the macro prototype to explicitly require the length of the
desired user data. Update all in-tree usage of this macro.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Splitt he ISO broadcast config into broadcaster and
sync receiver. This will allow a device that only
wants to one of the roles to have a much more optimized
configuration.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add the BT_ISO_SDU_BUF_SIZE which can be used to declare
the TX buffers for ISO, similar to the BT_L2CAP_SDU_BUF_SIZE
macro for L2CAP.
This also updates the ISO samples to use this as well
updating the SDU check to use
CONFIG_BT_ISO_TX_MTU/CONFIG_BT_ISO_RX_MTU without
subtracting the BT_ISO_CHAN_SEND_RESERVE to make the
API more clear.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
If BT_ISO is enabled we now compile conn.c which contains a
lot of functionality used by BT_ISO, even for broadcast-iso
builds, i.e. builds that do not require BT_CONN.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a new Kconfig option, BT_ISO_UNICAST, to make it possible
either configure unicast only, broadcast only or both.
This results in some code being moved, but not modified, and
should not effect anything.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add an application that initializes Bluetooth Subsystem,
creates an Extended Advertising set, starts Periodic
Advertising and creates BIG to demonstrate ISO Broadcaster
functionality.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
