Cache the delimiter string length in `parse_params`, instead of
calculating it on each character in the match buffer.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Given the following response: `+CIPSTA:ip6ll:"FE80::EDC:7EFF:FEDD:110C"`
The response delimiter is `:`, but there is also a quoted string that
contains the delimiter character. These delimiters should not be
considered when searching for the end of a parameter.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
This commit replaces the workarounds spread around the
drivers and subsystems with the updated PPP L2
interface.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
In case of BG95 where there is no reset pin, reseting the board
which uses a BG95 modem could result in powering-off the modem
(as oposed to "reset" the modem). This commit is an attempt
to handle this case and re-power the modem.
Signed-off-by: Andrei Hutanu <andrei.hutanu.i@gmail.com>
Using bg9x driver with bg95 specifically has the issue that BG95
modem replies with "RDY" when it's not fully initialized and AT
commands sent to the modem after this point would result in modem
reply of "ERROR". This commit adds a new prj.conf field in the build
configuration for custom unsolicited app ready string, with
the default being BG96 one ("RDY").
Signed-off-by: Andrei Hutanu <andrei.hutanu.i@gmail.com>
The BG95 pin configuration does not internally ever use the reset pin.
Because of this, there is no need to make reset pin mandatory.
Commit removes reset pin dependency [e.g. in case of BG95].
Signed-off-by: Andrei Hutanu <andrei.hutanu.i@gmail.com>
Re-enable reception on the UART instance when `UART_RX_DISABLED`
triggers, which can happen when errors occur on the line.
This stops the driver permanently moving into an unresponsive state.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Fix link error when both modems' drivers are enabled
as they both define the same structure but did not
make it static.
This fixes the CI build failure of
tests/drivers/build_all/modem/drivers.modem.simcom_sim7080.build
on particle_boron
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix the following build warning:
include <fcntl.h> without CONFIG_POSIX_API
is deprecated. Please use CONFIG_POSIX_API
or #include <zephyr/posix/fcntl.h>
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
When building drivers.modem.build we get a link error since
log_source_id_get() is not defined when CONFIG_LOG_MODE_MINIMAL
is defined.
Change ifdef protection to be CONFIG_LOG_RUNTIME_FILTERING
instead of CONFIG_LOG in the code to handle this case.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
When building with arm-clang we get warnings of the type:
wncm14a2a.c:828:14: error: array subscript is of type
'char' [-Werror,-Wchar-subscripts]:
} else if (isalpha(c2) != 0) {
^~~~~~~~~~~
Fix this by adding explicit casts to (int) when callinng isalpha()
or isdigit().
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
MISRA Rule 5.7 requires uniqueness of tag identifiers. Shell is
frequently problematic because many code uses `const struct shell
*shell`. This causes CI noise every time one of these shell files is
edited, so let's update all of them with `const struct shell *sh`
instead.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The internal socket context struct modem_socket_config
currently has members accessed directly by user. The
modem_socket_init() function has been updated to take all
user configurations as args. Thus removing the need for
the user to directly access the internal context for
initialization.
The user also currently needs to know of internal modem
socket libary behavior to determine if a socket has been
allocated and assigned an id, this is documented, and is
not safe. The functions:
modem_socket_is_allocated()
modem_socket_id_is_assigned()
modem_socket_id_assign()
have been added to the modem socket library API to perform
these checks, and to assign socket ids.
This commit makes use of the modem socket library safer and
adds documentation to the API.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
There is currently not a clear separation between
user configuration and internal context when using the
modem_cmd_handler library. This update adds a clear
separation, placing user configuration in a seperate
struct passed to modem_cmd_handler_init alongside the
internal context modem_cmd_handler_data.
There is also a lack of documentation of the user
configurations, these have been added to the new config
struct.
The new API function modem_cmd_handler_process has been
added to remove the need for the user to directly access
the process member of the internal context. This ensures
that the user is not encouraged to access any internal
context members.
Some whitespace errors exist in the modem_cmd_handler.c
file, these are outside of the scope of this PR. These
can be addressed in a later PR as they are not functional
changes.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
The UART IFACE API currently exposes the context struct
modem_iface_uart_data, expecting the user to fill in some
of the fields, with no documentation specifying which fields
and what they mean.
This API update moves all user configurable values in the context
out into a config struct, modem_iface_uart_config, within which
members are documented.
This prevents the user from interacting directly with the context
making use of the library safer and more readable.
The config structure helps make code readable by using "named args"
in a const struct instead of a long, nameless, parameter list passed
to the modem_iface_uart_init function.
The new API function modem_iface_uart_rx_wait is added to prevent the
user from having to interact with the rx sem in the context directly.
The context can now be safely interated with without direct access to
any of its members.
Pointers to the ring buffer params in the context have been moved to
config struct, as these are only useful during initialization of the
context.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
We get compile warnings of the form:
error: converting the result of
'<<' to a boolean; did you mean
'((__aeabi_ctype_table_ + 1)[(byte)] << 28) != 0'?
[-Werror,-Wint-in-bool-context]
if (!isprint(byte)) {
^
Since isprint (and the other is* functions) return an int, change check
to an explicit test against the return value.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Unify the drivers/*/Kconfig menuconfig title strings to the format
"<class> [(acronym)] [bus] drivers".
Including both the full name of the driver class and an acronym makes
menuconfig more user friendly as some of the acronyms are less well-known
than others. It also improves Kconfig search, both via menuconfig and via
the generated Kconfig documentation.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Adds dummy link layer for offloaded ifaces, allowing
ifaces to directly receive l2_enable calls
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Fix DNS resolver config for IPv6 only setup.
Check validity of the DNS addresses before trying to
configure the resolver.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Ensure DNS resolver is stopped if modem is turned off.
All IO connected to the HL7800 need to be de-asserted
in order for the HL7800 to power off.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
PSM hibernate mode would draw excessive current
because the UART would be enabled if CTS went low.
In hibernate mode, do not use CTS to power on the UART.
Fix reading of input pin states for low power by reading
the raw value.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Change event callback lock to a semaphore to avoid
priority issues the mutexes can cause.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
After a firmware update, DNS needs to be reconfigured.
Fix debug log for AT command strings.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Some modems supports multiple access technologies.
The access technology of the serving cell can be extracted from the
+CEREG command, which is already sent to the modem.
The parse function is extended to also parse the access technology value.
Fixes https://github.com/zephyrproject-rtos/zephyr/issues/51153.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
Trigger network dropped based on socket error notifications.
This debounces the network state and only triggers
the network interface to go down if the network
really drops or causes socket problems.
This will ensure upper networking stack layers can
cleanup broken sockets properly.
Debounce DNS resolver refresh.
Only trigger DNS resolver refresh if the DNS address changes.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Adding multidomain support by introducing log_link module which
acts as a receiver of log messages created by another domain.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Remove modem_cmd_handler_tx_lock lock when CONFIG_GSM_MUX
is disabled, as modem_cmd_handler_tx_unlock is under the same
conditions.
Signed-off-by: GUITTER Pierrick <pguitter@silicom.fr>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Many device pointers are initialized at compile and never changed. This
means that the device pointer can be constified (immutable).
Automated using:
```
perl -i -pe 's/const struct device \*(?!const)(.*)= DEVICE/const struct
device *const $1= DEVICE/g' **/*.c
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
mdm_hl7800_log_filter_set uses LOG_MODULE_NAME which
is undefined.
log_source_id_get() will fail to get the correct source id.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Let's switch to the LOG_DBG for +CREG, +CESQ and +CSQ
AT commands responses because they flood the console so much.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Patches the driver such that if the iface errors after init, the
driver will enter FSM error state.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Compare these variables properly so that the condition in an if
statement will be boolean.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Update gsm_ppp.c
