- This includes the driver, test app, and sample app
- Only the boards\arm\xmc47_relax_kit board is supported for now
Signed-off-by: Bill Waters <bill.waters@infineon.com>
This patch adds driver support for Microchip's PolarFire SoC I2C. This
initial support implements the Controller API only.
Signed-off-by: Conor Paxton <conor.paxton@microchip.com>
The rvm32m1 platform always uses pinctrl, there's no need to keep
extra macrology around pinctrl. Also updated driver's Kconfig to `select
PINCTRL`.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The MCUX platform always uses pinctrl, there's no need to keep extra
macrology around pinctrl. Also updated driver's Kconfig options to
`select PINCTRL` (note that some already did).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Add initial version of Infineon CAT1 i2c driver.
- Add initial version of binding file for Infineon
CAT1 I2C driver
Signed-off-by: Sreeram Tatapudi <sreeram.praveen@infineon.com>
Add a driver to support the Xilinx AXI IIC Bus Interface logic core, as
described in Xilinx document PG090. This can be configured for use on
most Xilinx FPGA-based platforms such as the Digilent Arty.
Both the 2.00a and 2.1 versions of the core are supported. The 2.00a
revision has a bug causing dynamic read mode to not be reliable. With
this version of the core the driver falls back to reading only 1 byte
per interrupt.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
This adds the i2c driver for the Renesas SmartBond(tm) MCU family.
It supports blocking transfers and callback transfers.
Currently only supports controller mode.
Co-authored-by: Stan Geitel <stan@geitel.nl>
Signed-off-by: Ben Lauret <ben.lauret.wm@renesas.com>
Unify the drivers/*/Kconfig menuconfig title strings to the format
"<class> [(acronym)] [bus] drivers".
Including both the full name of the driver class and an acronym makes
menuconfig more user friendly as some of the acronyms are less well-known
than others. It also improves Kconfig search, both via menuconfig and via
the generated Kconfig documentation.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
When turned on, the existing i2c dump code is use to log every I2C
transaction at debug level.
This can be very useful for detecting problems with I2C peripherals.
Signed-off-by: Trent Piepho <trent.piepho@igorinstitute.com>
Add I2C driver for Andes atciic100. Driver supports I2C target mode and
tested on adp_xc7k_ae350 in runtime.
Signed-off-by: Wei-Tai Lee <wtlee@andestech.com>
i2c_transfer_async is the asynchronous version of i2c_transfer where
the completion of the transfer is notified to the caller using a callback.
This can be used in conjuction with the common callbacks and datatypes
in async.h for directly doing an async transfer with an IPC object
to notify a thread.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Update i2c drivers to use DT_HAS_<compat>_ENABLED Kconfig symbol
to expose the driver and enable it by default based on devicetree.
We remove 'depend on' Kconfig for symbols that would be implied by
the devicetree node existing.
Signed-off-by: Kumar Gala <galak@kernel.org>
Updates the API and types to match updated I2C terminology. Replaces master
with controller and slave with target.
Updates all drivers to match the changed macros, types, and API signatures.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Add I2C bus recovery support to the NXP MCUX LPI2C driver. Since the LPI2C
peripheral block does not natively support I2C bus recovery, recovery is
performed using GPIO bitbanging.
Fixes: #42574
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Refactors the remaining I2C drivers to use the shared driver class
initialization priority configuration, CONFIG_I2C_INIT_PRIORITY, to
allow configuring I2C drivers separately from other devices. This is
similar to other driver classes.
The default is set to CONFIG_KERNEL_INIT_PRIORITY_DEVICE to preserve the
existing default initialization priority for most drivers.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add an interrupt driven i2c driver for gd32 i2c peripheral.
The transmit and reception method refer from GD32 SoCs user manual.
Particularly, reception method choose the solution B.
There have some wait for state ready logic in the driver. It cause by
i2c device internal state change slower than i2c driver.
Signed-off-by: HaiLong Yang <cameledyang@pm.me>
Prepare the driver to upcoming support of more mux references.
Rename all TCA9546A related files to TCA954x.
Keep ti,tca9546a and ti,tca9546a-channel compatible
for backward compatibility reasons.
New tca954x-base binding embedding common properties,
tca9546a binding inherits from it and define its own compatibles fields.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
Adds the ability for I2C drivers to report synchronous transfer stats
using a I2C specific macro to define the device instance.
The macro creates a container for device_state which allows for per
instance device class common data structure to be used in the device
class api (ex: i2c.h). This is used to maintain per driver instance
stats for all i2c drivers. This is a reusable idea across other device
classes as desired.
Using Kconfig device class stats may be turned on/off individually
this way as well, in this case I2C_STATS.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
The driver only support use case where the channels are used in mutual
exclusion.
Origin: Original
Signed-off-by: Guillaume Lager <g.lager@innoseis.com>
This patch add support for I2C on the Renesas R-Car.
This I2C hardware block can be found on various Renesas R-Car
SoC series.
It allows to perfom read and write on I2C buses in an
interrupt based way on R-Car Gen3 H3ULCB board.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
We will need this to be able to DEVICE_DT_GET() bus devices from
tests/drivers/build_all in an upcoming commit.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This commit is about the it8xxx2 i2c master driver which
includes six SMBus channels. The enhanced channel i2c3,
i2c4, i2c5 are controller which are designed to support
the I2C protocol.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
The NPCX SMB modules provides full support for a two-wire SMBus/I2C
synchronous serial interface. Each SMBus/I2C interface is a two-wire
serial interface that is compatible with both Intel SMBus and Philips
I2C physical layer. There are 8 SMBus modules and 10 buses in NPCX7
series.
In NPCX7 series, the SMB5 and SMB6 modules contain a two-way switch to
support two separate SMBus/I2C buses (ports) with one SMB module
(controller) Please refer Section 4.7.2 in the datasheet. In order to
support it, this CL seperates the i2c driver into port and controller
drivers. The controller driver is in charge of i2c module operations
and internal state machine. The port driver is in charge of pin-mux
and connection between Zehpyr i2c api interface and controller driver.
All of modules have separate 32-byte transmit FIFO and 32-byte receive
FIFO buffers. These FIFO buffers reduce firmware overhead during long
SMBus transactions by allowing the Core to write or read more than one
data byte at a time to/from the SMB module.
The CL also includes:
— Add npcx i2c port/controller device tree declarations.
— Zephyr i2c api implementation.
— Add "i2c-0" aliases in npcx7m6fb.dts for i2c test suites.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
The SAM4L have a unique I2C driver. It shares simultaneously pins for
both master and slave controllers. Each controller have their own
instance. This introduces the TWIM controller that handles only the
master part.
The TWIM controller uses no copy and the driver was prepared to work
with both 7 and 10 bits address. The controller can handler up to 256
bytes for a single transfer allowing long data communication with
almost no CPU intervention.
The driver was wrote specifically to Zephyr. It receives a transfer
list of from upper layers to a specific device on the bus. It programs
the first and second transfer, if it exists, before start. At end of
full read/write interrupt, will program the next data block. This
process repeats until all transfers be executed. The driver uses
interrupt from TWIM to check for erros or program next tranfer.
Future work can enable low power mode on the driver allowing long
transfers with low power consumption.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The only user of the I2C instances is the esp32 driver. Move the
Kconfig symbols down to the esp32 Kconfig for the instances it needs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
HAS_DTS_I2C is now selected by I2C and
always used as I2C && HAS_DTS_I2C.
It could then be purely removed.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add an emulation controller which routes I2C traffic to attached
emulators depending on the I2C address selected. This allows drivers
for I2C peripherals to be tested on systems that don't have that
peripheral attached, with the emulator handling the I2C traffic.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Adds a shim layer around the mcux lpc flexcomm driver to adapt it to the
zephyr i2c interface. It leverages heavily from the existing mcux lpi2c
shim driver.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This adds I2C bitbang driver for LiteX SoC builder with its bindings.
Signed-off-by: Robert Winkler <rwinkler@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Now that all I2C drivers utilize DTS we can select HAS_DTS_I2C in a
common place and don't need to do it per driver.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds a SERCOM I2C driver for SAM0 series chips.
Tested with a SAMD21 chip on a SSD1306 display and a MLX90393
sensor. Only compile tested for SAMD20 and SAMR21.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
Add driver and device tree binding for the Low Power Inter-Integrated
Circuit (LPI2C) controllers found in the RV32M1 RI5CY SoC.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
