This commit aligns TWIM shim to utilize memory-region property.
The memory-region is not required property that enables user
to specify placement of dma buffers in memory region.
It is done by assigning to memory-region property,
phandle to node with zephyr,memory-region and mimo-sram compatible.
When memory-region property is not specified for given
instance, buffer is placed in default RAM region with other data.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
There are two different i2c node properites `zephyr,flash-buf-max-size`
and `zephyr,concat-buf-size`. In the end max value of that two is used
to define size of the message buffer.
It's redundant to store both values in device config structure.
Changed config structure to contain only bigger value.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
Refactor the ESP32 target SOCs together with
all related boards. Most braking changes includes:
- changing the CONFIG_SOC_ESP32* to refer to
the actual soc line (esp32,esp32s2,esp32s3,esp32c3)
- replacing CONFIG_SOC with the CONFIG_SOC_SERIES
- creating CONFIG_SOC_FAMILY_ESP32 to embrace all
the ESP32 across all used architectures
- introducing CONFIG_SOC_PART_NUMBER_* to
provide a SOC model config
- introducing the 'common' folder to hide all
commonly used configs and files.
- updating west.yml to reflect previous changes in hal
Signed-off-by: Marek Matej <marek.matej@espressif.com>
- use CONFIG_HAS_HW_NRF_* symbols consistently in nRF multi-instance
drivers when creating particular driver instances
- remove unnecessary hidden Kconfig options that indicated the type of
peripheral to be used by a given instance (e.g. SPI, SPIM, or SPIS)
and enabled proper nrfx driver instance; instead, use one option per
peripheral type and include the corresponding shim driver flavor into
compilation basing on that option (not the one that enables the nrfx
driver as it was incorrectly done so far in some cases)
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This commits adds the ability to use Silicon Lab chips as an I2C
target. This could be used together with the EEPROM target
driver.
Signed-off-by: Kai Meinhard <kaimeinhard@hotmail.de>
Add a semaphore to ensure that only one transaction
happens at a time when threads want to transfer
simultaneously.
Signed-off-by: Wei-Tai Lee <wtlee@andestech.com>
The eSPI, I2C, and SPI emulators use devicetree macros to build an array
of devices on the virtual bus. Currently, they will add device nodes that
are not status-okay. This leads to linker errors because the respective
device drivers would not have instantiated device structs for these
nodes --assuming the driver was even compiled. This can be frustrating
if nodes need to be disabled for debugging or configuration purposes.
Update the bus emulators to only consider status-okay nodes by changing
the macros used to iterate over bus devices.
Signed-off-by: Tristan Honscheid <honscheid@google.com>
Add I2C target driver used buffer mode. The maximum accessible buffer
is 2044 bytes, the default is 256 bytes.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Add the callback functions of buf_write_received and buf_read_requested
to support buffer mode.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
In order for TCA954X driver to work well, we know that
mux root must be initialized before channels.
(see #37786).
This commit is:
- Ensuring that this condition is met at build.
- Document needed values for menuconfig to help user.
- Edit these values for TCA954X test sample
Fixes#40833
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
- This includes the driver, test app, and sample app
- Only the boards\arm\xmc47_relax_kit board is supported for now
Signed-off-by: Bill Waters <bill.waters@infineon.com>
This patch adds driver support for Microchip's PolarFire SoC I2C. This
initial support implements the Controller API only.
Signed-off-by: Conor Paxton <conor.paxton@microchip.com>
Previous commit added support of large transactions on I2C v2,
this commit implements some changes to also add support
of large transactions on I2C v1. Some refactoring is also done
to put the code in the right source files.
Fixes zephyrproject-rtos#58866
Signed-off-by: Michael Grand <m.grand@trustngo.tech>
This patch adds the ability to change virtual i2c eeprom target address
at runtime using a single function.
Added CONFIG_I2C_EEPROM_TARGET_RUNTIME_ADDR as an optional Kconfig.
Signed-off-by: Sahaj Sarup <sahaj.sarup@linaro.org>
This adds a few line use zephyr_syscall_header() to include
headers containing syscall function prototypes.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The I2C driver clock was initialized in board specific code, move it to
the driver as it is part of its responsabilities.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The NPCX I2C controller has a port-controller hierarchy and the driver
is split in two files, with separate device struct and init functions.
These are currently initialized at the same level and priority, so the
actual order depends on what the linker does.
To avoid relying on the linking order, add a dedicated priority option
for the port that is set to go after the normal I2C one by default.
Found this by building with CONFIG_CHECK_INIT_PRIORITIES.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add I2C target mode support for NPCX i2c driver. Verified with
i2c_target_api test suite on npcx9m6_evb.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Add STM32C0 SOC to combined interrupt config in order to
make it support the I2C driver.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Logic was wrong when testing if a slave is still attached. And i2c
driver was never disabled.
Test if one of the two slave_cfg pointer is not NULL to return
immediately.
Signed-off-by: Vincent Geneves <vgeneves@kalray.eu>
Since the introduction of the second slave address support, slave_cfg
pointer may be NULL when entering slave event function.
It happens when both targets are registered and then the first one is
unregsitered.
Test the pointer vs NULL before using it.
Signed-off-by: Vincent Geneves <vgeneves@kalray.eu>
The i2c_npcx_controller does not actually implement the i2c API, that's
implemented in the port driver and the controller one is in support of
that. This means there's no need to use the I2C specific instance
define, as that would end up adding the stats structure that would never
get used.
This was originally added in 7b1349cfe6.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The i2c shell write command outputs the error "Failed to read from
device" while it tries to write data to device.
This fixes the error by outputting "Failed to write to device" instead.
Fixes:
uart:~$ i2c write i2c@3ff53000 23 01
Failed to read from device: 23
Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
I2C driver overwrites i2c_msgs buffers, which
causes statistics to fail counting.
This creates new variables to hold msg buffer information.
Fixes#57532
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Mutexs were added to improve the overlapping phenomenon
because there is a part that shares the i2c line.
Signed-off-by: yeongnam chu <yeongnam.chu@assaabloy.com>
The emulated espi and i2c bus controllers do not depend on CONFIG_EMUL
being enabled. When these fake bus controllers are enabled by their
assoicated compatible in the devicetree without CONFIG_EMUL it results in
linker failures for underlying peripheral emulators which may be difficult
to understand. The SPI config already depends on EMUL.
Make the ESPI and I2C emulated controllers depend on CONFIG_EMUL. Note:
This still allows linker failures if CONFIG_EMUL=n, but the linker failures
will be consistently at device driver instantiation due to a missing bus
controller. Regardless, this will be easier to debug when someone forgets
to enable CONFIG_EMUL.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
This patch adds MULTITHREADING as a dependency to the nrfx i2c driver.
The driver uses semaphores internally and can result in linker errors
if MULTITHREADING is not enabled.
Signed-off-by: Maximilian Deubel <maximilian.deubel@nordicsemi.no>
Updated the code to to invoke reset using PCR block
z_mchp_xec_pcr_periph_reset() instead of resetting
using I2C Configuration register
Signed-off-by: Manimaran A <manimaran.a@microchip.com>
Disable the hardware I2C target detection on the IT82xx2 SoC family.
Note: The register setting of I2C target detection is different in
IT81XX2 and IT82XX2 SOC.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
The rvm32m1 platform always uses pinctrl, there's no need to keep
extra macrology around pinctrl. Also updated driver's Kconfig to `select
PINCTRL`.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The MCUX platform always uses pinctrl, there's no need to keep extra
macrology around pinctrl. Also updated driver's Kconfig options to
`select PINCTRL` (note that some already did).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use PRIxPTR macros to fix compiler warnings of the form:
i2c_xilinx_axi.c:266:50: warning: format specifies type 'unsigned long'
but the argument has type 'mem_addr_t' (aka 'unsigned int') [-Wformat]
LOG_INF("Configuring %s at 0x%08lx", dev->name, config->base);
~~~~~ ^~~~~~~~~~~~
%08x
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
- Add initial version of Infineon CAT1 i2c driver.
- Add initial version of binding file for Infineon
CAT1 I2C driver
Signed-off-by: Sreeram Tatapudi <sreeram.praveen@infineon.com>
Remove all init functions that do nothing, and provide a `NULL` to
*DEVICE*DEFINE* macros.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a driver to support the Xilinx AXI IIC Bus Interface logic core, as
described in Xilinx document PG090. This can be configured for use on
most Xilinx FPGA-based platforms such as the Digilent Arty.
Both the 2.00a and 2.1 versions of the core are supported. The 2.00a
revision has a bug causing dynamic read mode to not be reliable. With
this version of the core the driver falls back to reading only 1 byte
per interrupt.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Use CONFIG_I2C_INIT_PRIORITY instead of
CONFIG_KERNEL_INIT_PRIORITY_DEVICE as introduced in
c8f9f53322.
Looks like the priority was accidentally changed in
f2c42663b4.
Signed-off-by: Martin Jäger <martin@libre.solar>
This adds the i2c driver for the Renesas SmartBond(tm) MCU family.
It supports blocking transfers and callback transfers.
Currently only supports controller mode.
Co-authored-by: Stan Geitel <stan@geitel.nl>
Signed-off-by: Ben Lauret <ben.lauret.wm@renesas.com>
This change adds a mutex to protect against simultaneous access to the bus
instead of returning an error during transfers. Since most I2C code doesn't
handle retries (especially with a -EIO code) not blocking on a mutex can
cause a number of problems.
Signed-off-by: Corey Wharton <xodus7@cwharton.com>
Unify the drivers/*/Kconfig menuconfig title strings to the format
"<class> [(acronym)] [bus] drivers".
Including both the full name of the driver class and an acronym makes
menuconfig more user friendly as some of the acronyms are less well-known
than others. It also improves Kconfig search, both via menuconfig and via
the generated Kconfig documentation.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
