PR adds the statistic module to estimate frame handling.
The module helps to understand the ratio of
the received\relayed\dropped\transmited frames.
That shows the efficiency of the current configuration\implementation.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
All public API declared in cfg.h won't schedule storing of the change
persistently if BT_MESH_VALID flag is not set. The flag is set after the
node is provisioned.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
BT_ID_DEFAULT is hardcoded in mesh. Added clarification about
the necessity of another local identity allocation for BLE
if it coexists with mesh.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Mesh models may have a data that needs to be stored persistently.
Currently, the models should call bt_mesh_model_data_store and the store
will happen in the calling context. Most likely that it will be called
in BT RX thread as this is the context from which model's opcodes
handlers are called. Thus, the thread will be blocked until the store is
finished.
Another issues is that some models may have states that changes
frequently. Triggering the store on every state change may wear out
flash. Therefore, the models need to implement some postpone mechanism
to reduce the flash wear out.
The mesh stack has already implemented the mechanism of deferred store
with its own settings. The models could use it instead of implementing
their own mechanism.
In combination with the mesh settings workqueue, the models can store
their data without blocking the stack work.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Currently mesh settings are stored in the system workqueue context.
Most of other stack functionality, such that advertisements (incl
relay), loopback, transport sar, beacons transmission, etc. is also
processed in the system workqueue context. When a massive amount of
data needs to be stored and in particularly when page erase needs to
be triggered by GC of NVS subsystem to allocate flash pages, the
execution of the stack (and other functionality that uses the system
workqueue) will be blocked until storing is finished. For example,
right after the provisioning of a erased device, a node may not be
responsive for up to 400ms before it can continue sending messages.
The waiting time may increase if there is a GATT connection in the
mean time.
When write or erase operation is triggered, the flash driver waits for
Bluetooth controller to allocate a time needed to perform the operation.
During the whole operation, the context from which the operation was
triggered is put to sleep. This allows other threads to run until
Bluetooth controller finds the time for the flash driver. In other words,
every settings_save_one or settings_delete should be considered as
rescheduling points.
Considering this, Bluetooth mesh can use another thread to store its
settings, thus releasing the system workqueue for other tasks including
the operation of the stack itself.
The consistency of the data to be stored is guaranteed by the current
implementation where the data is copied to another struct before calling
settings_save_one. The pending flag of a particular module is dropped in
settings.c before starting to store the corresponding data. Thus, if
during the sleep the node receives a message that triggers a change in a
module which data is currently being stored, the pending flag will be
restored and the new change will be stored eventually.
Having this option enabled including with the partial erase, will make
the node more responsive in the described situations.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Aligns Bluetooth mesh shell parameter documentation to use the
same syntax, abbrevations and formating.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Changes the implementation and documentation in config client shell
command for Config Model Publication Set and Config Model Publication
Virtual Address Set to accept period resolution and period steps as
separate arguments to make it more user friendly.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Add support for setting the location value
(BT_CODEC_CONFIG_LC3_CHAN_ALLOC) in the codec configuration.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Update the BAP shell documentation to be more up to date.
There are still several BAP commands that do not have
examples of further documentation, but that is still
a TODO.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Several places used the bt_audio prefix where it shouldn't.
Also moved the BAP documentation to its own file.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename the bt_audio_unicast_client API to bt_bap_unicast_client
and move the API to bap.h
Also adds the _bap_ infix to the bt_unicast_client functions.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename the bt_audio_audio_server API to bt_bap_unicast_server
and move API to bap.h.
This also adds the _bap_ infix for bt_unicast_server.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This adds commands to advertise Solicitation PDUs, configure
On-Demand Private Proxy and manage Solicitation PDU RPL.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
This is initial implementation of Proxy solicitation procedure.
This includes:
- support for sending and receiving Solicitation PDUs
- On-Demand Private Proxy functionality (Server and Client) controlling
behaviour of node after receiving Solicitation PDU
- Solicitation PDU RPL Configuration (Server and Client), which manages
Replay Protection List for Solicitation PDUs.
Proxy Solicitation allows to enable advertising of Proxy service on node
by sending Solicitation PDUs. These PDUs are not part of Mesh messages;
instead, these are non-connectable, undirected advertising PDUs with
their own format, containing Proxy Solicitation UUID.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
- Add entry for client and server in composition data.
- Add Client commands to aggregate and send messages.
MESH/SR/AGG/BV-02-C requires more key slots.
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Includes Opcodes Aggregator Server and Client. To use Opcodes Aggregator
client features with some client model, that client should support async
API.
Co-authored-by: Ludvig Samuelsen Jordet <ludvig.jordet@nordicsemi.no>
Co-authored-by: Mia Koen <mia.koen@nordicsemi.no>
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adds support for private beacon sending and receiving.
Co-authored-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add Transport SAR Configuration models to shell.
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adds conditional support for the BLOB and DFU models in the mesh shell.
Additionally creates a dummy BLOB stream for testing.
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Co-authored-by: Anders Storrø <anders.storro@nordicsemi.no>
Co-authored-by: Ludvig Samuelsen Jordet <ludvig.jordet@nordicsemi.no>
Co-authored-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Co-authored-by: Mia Koen <mia.koen@nordicsemi.no>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adds support for the Device Firmware Distribution Server model from Mesh
Model specification v1.1.
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Co-authored-by: Ludvig Samuelsen Jordet <ludvig.jordet@nordicsemi.no>
Co-authored-by: Anders Storrø <anders.storro@nordicsemi.no>
Co-authored-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Co-authored-by: Mia Koen <mia.koen@nordicsemi.no>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adds DFU models from the Mesh Model specification v1.1.
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Co-authored-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Co-authored-by: Anders Storrø <anders.storro@nordicsemi.no>
Co-authored-by: Mia Koen <mia.koen@nordicsemi.no>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adds support for the BLOB Models from Mesh Model specification v1.1.
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Co-authored-by: Anders Storrø <anders.storro@nordicsemi.no>
Co-authored-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Co-authored-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Co-authored-by: Ludvig Samuelsen Jordet <ludvig.jordet@nordicsemi.no>
Co-authored-by: Mia Koen <mia.koen@nordicsemi.no>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Implementation of the enhanced provisioning authentication (EPA)
that is based on SHA256 and HMAC security algorithms.
OOB authentication mandates EPA usage.
Co-authored-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Log modes other than the deferred may cause unintended delays during
processing of log messages. This in turns will affect scheduling of the
receive delay and receive window for both, Friend and LPN.
Adding a compilation warning instead of assert as a user may still want
to compile a code with friendship feature enabled without actually
establishing a friendship.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Renames almost all occurences of VCS to VCP, as we want to
use the profile as the namespace for volume control.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Renamed remaining structs and functions that are not
for the set coordinator to use the set member CSIP
role name.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Renamed the coordinated set implementation to use the
profile (CSIP) name instead of the service (CSIS) name, as
the former is more general.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename BASS to BAP Scan Delegator and BASS Client
to BAP Broadcast Assistant. This is the first step towards
integrating the BASS with the rest of BAP.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Alters several provisioning related features to allow commands to be
functional with application defined Provisioning properties &
capabilities.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
This commit splits out the model related commands from mesh shell to
separate shell modules. The purpose of this alteration is to make model
commands more flexible by letting the application itself define the
model instances.
- Move Health Client commands to separate shell module.
- Move Config Client commands to separate shell module.
- Remove Health Client instance from shell.c.
- Add Health Client instance to mesh_shell test application.
- Add util library for Mesh shell.
- Some refactoring of shell menu layout.
- Update Mesh shell documentation.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Add vendor specific IQ samples report that holds IQ data in 16 bits
signed integer format. Thanks to that we preserve complete accuracy of
IQ samples provided by Nordic Direction Finding Extension in Radio
peripheral. That helps to maintain better accuracy of evaluated
angles with use of reported IQ samples.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
