The `BT_DEBUG_*` Kconfig symbols have been deprecated for more than 2
versions, remove them.
Update code that was still using them.
Remove the Bluetooth specific `Kconfig.template.log_config_bt` and use
`Kconfig.template.log_config_inherit` from the logging subsystem
instead, now that the legacy symbols can be removed.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Add the CAP commander reception start procedure which starts reception
on one or more CAP acceptors
With the implementation of broadcast reception start procedure we also need
some mockups for unit testing
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
When calling bap_broadcast_assistant add_pa_sync, it should only
set the BIS index field as optional parameters and not to whatever
is in the BASE.
If setting BIS index which the BASE does not support, then the
command should be rejected.
This PR fixes https://github.com/zephyrproject-rtos/zephyr/issues/70835
Signed-off-by: Ping Wang <pinw@demant.com>
When calling bap_broadcast_assistant add_pa_sync, it should only
set the BIS index field as optional parameters and not to whatever
is in the BASE.
If setting BIS index which the BASE does not support, then the
command should be rejected.
This PR fixes https://github.com/zephyrproject-rtos/zephyr/issues/70835
Signed-off-by: Ping Wang <pinw@demant.com>
The bt_cap_common_discover function relied on a global variable
used to indicate that a discovery was in process.
This global variable prevented multiple discoveries to take place
on multiple ACL connections, where the intention was to stop
multiple discoveries on the same ACL.
This has been fixed by moving the variable into the
struct bt_cap_common_client, so that it applies per
connection, rather than a global check.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Moved the busy flag and the GATT paramters to the
individual CSIP Set Coordinator instances.
This allows to use multiple instances in parallel,
and thus in turn allow CAP to do things in parallel.
This commit has been done with minimal amount of changes,
even if there are multiple pieces of code that could likely
be refactored to be better.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When in the BAP unicast server role, at least PAC sink
or PAC source shall be set.
In order to fulfill this new requirement, a few other Kconfig
options had to be changed to a `depends on` from `select` to
avoid recursive Kconfig requirements. This change may require
some applications to update their configurations according
to the migration guide.
The change from `select` to `depends on` is ideal anyhow
as that is the recommended way to add dependencies.
This can checked via the combined BT_PACS Kconfig value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add USB out support for the BAP shell, so that decoded LC3
data can be sent to the host (e.g. a PC).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The volume controller always set the busy flag in
bt_vcp_vol_ctlr_set_vol, where it should only set it
if the GATT operation succeeds.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
As per the BAP spec, the scan delegator device should add the BASS service
data in the extended advertising data when it requests a broadcast
assistant to scan for it. For testing purposes that's usually the case
with the shell, extended advertising data shall be populated with the
BASS service data.
Signed-off-by: Nithin Ramesh Myliattil <niym@demant.com>
An audio stream is unidirectional, so it's always either
TXing or RXing, so the fields can safely be moved to an
enum.
The struct now has both a is_rx and is_tx field. The reason
why two bools are being used, is that the both of them may
be false (we need 3 states).
All access to the rx and tx structs in the union shall be
guarded by these fields.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add support for decoding incoming LC3 data. At this point
we only instantiate a single LC3 decoder, so only one frequency
and duration is supported.
To accomodate for the increased RAM usage, the number of unicast
streams support have been decreased.
Further more, the LC3 handling in the shell has overall been
improved, also for encoding.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modifies the audio configuration (ac) commands for CAP
and GMAP to use the default presets instead of supplying
the preset as arguments. This will allow the user to
use the `bap preset` command to configure everything in the
codec configuration before the AC commands are issued.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When creating a broadcast sink using the auto scan feature,
the call to bt_le_per_adv_sync_create would use a local
PA sync pointer, instead of one from the per_adv_syncs
array, making it impossible to stop the PA sync afterwards.
This commit modifed the auto_scan so that it properly uses
the per_adv_syncs array, while still assigning the PA sync
in the shell broadcast sink struct.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The print_codec_cfg_chan_allocation did not take the case where
chan_allocation == BT_AUDIO_LOCATION_MONO_AUDIO into account,
in which case it should print "Mono".
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
By exposing the underlying iso channel, the application can retrieve
properties of the iso channel.
This can be useful in case the application wants to use the connection
handle for vendor specific HCI commands or to retrieve the particular
parameters used for the given channel.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
The bt_debug_dump_recv_state did not care if the receive
state being dumped to log was active or not, and if it was
not actice, then it may just contain random data.
Added a check to see if it was active.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The cap_initiator unicast_stop command will now stop
all streams by default, without supplying the "all" argument.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The buffers for the PBP advertising data as well as the
buffers for the BASE periodic advertising data were
not cleared, so calling the functions multiple times
would simply append the data rather than just setting
the new data.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
There are devices that will send empty SDUs instead of
empty PDUs, and while that should be harmless, it is nice
to know what is going on, and we may want to deal with
empty SDUs and empty PDUs differently.
This also modifies the state for TS and PSN to only be
applied for valid ISO packets.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
It is a common occurance that a specific type is not
found in the codec configuration, and the main way of
knowing that is by calling the function.
The debug log does not help debug anything (as it does also
return a specific error code), but rather just clutters up
the log if enabled.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When returning an error code directly to an application
in the API, it should not log as a warning or error.
The lack of PAC records is also reported directly to the
application, and is not an error (in fact it is valid not to have
e.g. sink or source pacs).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add printing of the broadcast ID and whether an existing PA
sync was found in the bap_broadcast_assistant_recv_state_cb
function.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The bap_broadcast_assistant mod_src command can now take "unknown"
as a value to supply BT_BAP_PA_INTERVAL_UNKNOWN to the scan
delegator.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The documentation for the command
bap_broadcast_assistant broadcast_code
was incorrect and has been fixed.
Additionally, and example of the command has been added
in the shell documentation.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When a PA is synced via PAST, the receive state does not
have a PA sync object, and the address and SID must be
used.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The audio configuration 5 is defined to have 2 sink channels
per stream and 1 source channel per stream.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If pa_sync_past returns 0 then that means we are ready to
sync to past, and the BT_BAP_PA_STATE_INFO_REQ state should be set.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds the CAP Commander Change Microphone Mute procedure.
This procedure changes the microphone mute state on one or more
CAP Acceptors.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added a check for checking duplication when adding a source in the
broadcast assistant, as per requirement in BAP 6.5.4. It is not
permitted to add a source such that a combination of broadcast_id,
adv_sid and address type would result in same triple of values.
Added a recv_state struct to cache these values when read, and moved
past_avail and srd_ids into this as well.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Added a check for duplication of add source operation in the Scan
Delagator. BAP 6.5.4 states that an assistant may not perform add
source operation if it results in a duplication of a source. While
this is not mentioned for the Scan Delegator, the spirit of the spec.
must be that no duplications can exists in the recv_state, which is
what this commit fixes.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Since the cap_common.c rely on CONFIG_BT_MAX_CONN, and is
only used for connected procedures, it should be guarded
by CONFIG_BT_CAP_INITIATOR_UNICAST instead of
CONFIG_BT_CAP_INITIATOR
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Increase the timeouts to be 60 instead of 6.
The reason for this is that some controllers (like the Zephyr
controller) will reserve some of these to ensure stability,
and in fact with skip = 5 and retry = 6, it would still
send the PA reports at every interval.
To accomodate a higher timeout value, the functions used to
convert PA intervals to PA timeouts have been updated.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
There is no need to validate stream_param->data if it is NULL.
Fixes failing PTS BAP/BSRC test cases.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
The codecs used for the bap bt_bap_stream_config was only
valid for the lifetime of the procedure, which meant
that by the end of the procedure the stream->codec_cfg
became invalid.
This is fixed by using the pointer provided to the
CAP API, and documentating the lifetime of the codec_cfg.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When the broadcast sink is stopped, the sink was also
set to NULL via
default_broadcast_sink.bap_sink = NULL;
However the lifetime of the broadcast sink does not
follow the state of the streams, and it still exists
afterwards. The broadcast sink can only be terminated
(deleted) via the term_broadcast_sink command.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds the CAP Commander Change Microphone Gain procedure.
This procedure changes the microphone gain on one or more
CAP Acceptors.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Two places we did not have an error check from calling
bt_bap_ep_get_info before accessing the result. These
have simply been added (without an else), as they are
(very) unlikely to fail.
This was caught by coverity and thus fixes those
coverity issues.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Codecs can be printed at different levels:
level 0: Generic and unicast
level 1: subgroup codec configs
level 2: BIS codec configs
This commit ensures that the indentation level
is correctly increase based on where the codec configuration
data is printed.
This also updates the documentation for the BAP shell.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
print_codec_cfg and print_codec_cap has been modified to print the
codec metadata in a more human-readable way, so it is easier to read.
This also adds the (final) human readable support when
parsing and printing BASEs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
print_codec_cfg has been modified to print the codec configs in a more
human-readable way, so it is easier to read.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
print_codec_cap has been modified to print the remote caps in a more
human-readable way, so it is easier to read and understand the remote
server's capabilities.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
