When building ISO applications on a device that has the host
and controller on the same core, the application developer
shouldn't have to set controller specific configurations.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
`OPENTHREAD_PLATFORM_KEY_REF` should not be selected for RCP
architecture, as keys are handled on host's side and passed to
device over Spinel, and therefore they cannot be exported
on platform from reference with PSA Crypto API.
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
Part of the initialization is done in the static usb_device_init()
function called by SYS_INIT(). We can move part of it, which initialize
the descriptor and calls usb_set_config(), to usb_enable(). This allow
some usb_get_device_descriptor() dependencies called at application
desired point.
Also make sure that usb_fix_descriptor() is called only once.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
These relocations are needed e.g. when an LLEXT is built from
multiple files and they share data objects.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Add missing break inside switch statement to allow UDC context to
indicate that current operating speed is High-Speed. Due to missing
break statement, the stack always assumed Full-Speed.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Two issues fixed:
When pull-context is created, it does not have to wake up the RD
client context. Ignore the EPERM warning.
When new pull-context creates a new socket, sometimes socket-loop
gets to recvfrom() before we have set O_NONBLOCK on the socket.
So use ZSOCK_MSG_DONTWAIT on zsock_recvfrom() so it does not
block the socket loop.
Fixes#71450
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Modem chat scripts should be able to add a script command which
is simply a delay. The validation of chat scripts currently
disallows chat script commands which only have a timeout set.
Update modem_chat to allow modem chat script commands which
only have a timeout. Additionally do a bit of cleanup to
remove duplicate code.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
net_buf_alloc(K_FOREVER) can now fail (if run from the syswq). Propagate to
the caller instead of asserting.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
It may happen that the interface is up but not yet running
when we issue the rejoin_ipv6_mcast_groups(). This can be
fixed by calling this function again right after the iface
is set to 'running' state in the notify_iface_up handler.
Signed-off-by: Marcin Kajor <marcin.kajor@nordicsemi.no>
This sets the number of arguments for SMF_CREATE_STATE() to always
be the same, independent of the selected Kconfig options.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
The `BT_DEBUG_*` Kconfig symbols have been deprecated for more than 2
versions, remove them.
Update code that was still using them.
Remove the Bluetooth specific `Kconfig.template.log_config_bt` and use
`Kconfig.template.log_config_inherit` from the logging subsystem
instead, now that the legacy symbols can be removed.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Add the CAP commander reception start procedure which starts reception
on one or more CAP acceptors
With the implementation of broadcast reception start procedure we also need
some mockups for unit testing
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
This commit fixes the incorrect include path for the fuse library.
pkg_search_module populates the <XXX>_INCLUDE_DIRS cmake var.
Signed-off-by: Russ Webber <russ@rw.id.au>
When calling net_if_get_default(), print a warning if no
network interfaces are found. This helps debugging mysterious
crashes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When trying to get IPv6 prefix, if there are no network interfaces
then the net_if_get_default() will return NULL but we should not
crash at that point but return gracefully.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Making default preferred time much closer to default valid time
so that the served addresses are much shorter time in deprecated
state where they cannot be utilized. This is important in Zephyr
as there are limited number of IPv6 addresses that can be allocated
to the network interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The local address used for established TCP socket needs to be
dig out from TCP internals and not from context->local.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
We usually cannot use context->local for established TCP connections
because the local address is not updated for TCP if we are bound to
any address. So create helper that try to figure out the end point
addresses.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add support for IPv6 Source Address Selection defined in RFC 5014.
This commit does not add any address selection support to getaddrinfo()
as described in the RFC. The AI_EXTFLAGS symbol and also the ai_eflags
to hints is added but they are not used by the code.
The public/temporary address selection is only done internally by
the net_if_ipv6_select_src_addr_hint() according to flags set by
setsockopt().
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When printing IPv4 and IPv6 address information in "net ipv4" and
"net ipv6" commands, print also reference count of the IP address.
This is useful for debugging purposes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add reference counting to network interface address (for both
IPv4 and IPv6) so that the address is not removed if there are
sockets using it. If the interface address is removed while there
are sockets using it, the connectivity will fail for the said
socket.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add events to be generated when privacy extension is enabled
or disabled, or when allow/deny filter is added or deleted.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When executing "net iface" command, print current status of
IPv6 privacy extension if it is enabled in config file.
The "net ipv6 ..." command prints IPv6 privacy extension
information, and can add or delete IPv6 prefix filters.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If IPv6 privacy extension is enabled, then we need to select
proper public or temporary IPv6 source address when sending the
packet.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This creates support for IPv6 privacy extensions which is described
in RFC 8981. This will also add API that can be used to add IPv6
prefixes to a allow or deny list privacy extension filter.
The code will create temporary IPv6 addresses from prefixes that
are advertised by Router Advertisement messages. The temporary
IPv6 addresses are then expired according to lifetime and removed.
Fixes#9349
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If IPv6 address expires and moves to deprecated state, then
send a mgmt event so that listeners can act on it.
One such action is to close a socket bound to that source address
so that the address can be released.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This commit adds transmission of MLDv2 reports whenever a multicast
routing entry is added or removed when suitable (it checks if the
given interface itself has joined the group).
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
This commit introduces a new option CONFIG_NET_MCAST_ROUTE_MLD_REPORTS
which appends multiacst routes to MLDv2 reports. These records are
intended to inform reports' recipients about potential listeners on
the other interfaces.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
The coap_client lib only handled "one-shot" requests properly. This
patch allows it to keep listening for additional responses to a request,
if the request was made with the CoAP OBSERVE option appended.
An API for canceling such requests is also added.
Signed-off-by: Benjamin Lindqvist <benjamin@eub.se>
The size field in net_buf should not be used directly as then
the optional headroom will not be taken into account.
There is the net_buf_max_len() API that should be used instead.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When calling bap_broadcast_assistant add_pa_sync, it should only
set the BIS index field as optional parameters and not to whatever
is in the BASE.
If setting BIS index which the BASE does not support, then the
command should be rejected.
This PR fixes https://github.com/zephyrproject-rtos/zephyr/issues/70835
Signed-off-by: Ping Wang <pinw@demant.com>
When calling bap_broadcast_assistant add_pa_sync, it should only
set the BIS index field as optional parameters and not to whatever
is in the BASE.
If setting BIS index which the BASE does not support, then the
command should be rejected.
This PR fixes https://github.com/zephyrproject-rtos/zephyr/issues/70835
Signed-off-by: Ping Wang <pinw@demant.com>
Spell checking tools do not recognize "iff", replace with "if and only if".
See https://en.wikipedia.org/wiki/If_and_only_if
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Kconfig option to enable object version reporting should
be moved into sub section "Engine features" so
it does not clutter up the main LwM2M menu.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Due to recent changes in hostap to move few buffers from heap->stack (to
improve the reliability of allocations) this has increased the stack
size and with another recent change to increase the max polling sockets
this puts over the 4096 stack size for net_mgmt causing stack overflow.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The bcdUSB value 0x0210 defined in USB 3.2 Specification indicates USB
3.2 device operating in one of the USB 2.0 modes. USB 2.0 Link Power
Management Addendum defines bcdUSB value 0x0201 to indicate that USB 2.0
device supports the request to read the BOS Descriptor.
The main difference between bcdUSB 0x0210 and 0x0201 is that the USB 3.2
device must support LPM, while USB 2.0 devices can (but are not required
to) support LPM.
The difference is respected by USB 3 Gen X Command Verifier (2.3.0.0)
Chapter 9 Tests [USB 2 devices], where the test behaves as follows:
* For bcdUSB 0x0200:
Checking Device Under Test for LPM L1 Compatibility...
USB version of device is 2.00.
DUT is NOT compatible with LPM.
LPM is NOT required for DUT
LPM is only supported in USB version 2.01 and above.
* For bcdUSB 0x0201:
Checking Device Under Test for LPM L1 Compatibility...
USB version of device is 2.01.
DUT IS compatible with LPM.
LPM is NOT required for DUT
USB 2.0 Extension Descriptor bmAttributes:
LPM Capable = 0
BESL and Alternate HIRD Supported = 0
Baseline BESL Valid = 0
Deep BESL Valid = 0
Baseline BESL: 0d
Deep BESL: 0d
LPM is not supported
* For bcdUSB 0x0210:
Checking Device Under Test for LPM L1 Compatibility...
USB version of device is 2.10.
DUT IS compatible with LPM.
LPM IS required for DUT
USB 2.0 Extension Descriptor bmAttributes:
LPM Capable = 0
BESL and Alternate HIRD Supported = 0
Baseline BESL Valid = 0
Deep BESL Valid = 0
Baseline BESL: 0d
Deep BESL: 0d
(USB: 9.6.2.1.6) Bit 1 in Attributes field of a USB 2.0 Extension
descriptor returned in response to a GetDescriptor(BOS) request
must be 1 for LS/FS/HS devices that support LPM L1.
The test fails when LPM bit is not set in USB 2.0 Extension Descriptor
only when bcdUSB is 0x0210. The test failure was incorrectly fixed in
commit 312429be3c ("usb: samples: Add Extension descriptor to webUSB
sample."). Properly fix the issue by changing bcdUSB to 0x0201 and
removing the false LPM support claim.
The false LPM claim was leading to device ceasing to work after some
time if there was no traffic from host to device (when the host is
likely to have executed the LPM L1 transition that was not properly
handled by the device).
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
When PPP moves to the 'Closing' state it sends up to configured number
of 'Terminate-Request' packets. It only moves to the 'Initial' state,
after running out of retransmits or when it receives a 'Terminate-Ack'
packet.
Signed-off-by: Markus Lassila <markus.lassila@nordicsemi.no>
