The current tests should fail because the DMA controller now is disabled
by default in the devicetree. This add specific configuration to enable
the DMA controller and decalre the amount of bytes to be transfered to
allow small devices not fail in the link phase.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Increase test coverage for Raspberry Pi's SoCs. Use the `socs` folder
rather than `boards` to enable these tests to run on any boards with the
same SoCs.
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
Add initial support for the RP2350's DMA peripheral, allow tests
under drivers/dma/loop_transfer to run on on the Raspberry Pi Pico 2,
and update the board's documentation.
Signed-off-by: Manuel Aebischer <manuel.aebischer@belden.com>
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
Convert qspi and hyperflash to variants instead of revisions by popular
demand.
And convert evkb into a revision instead of a different board.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Added sltb010a,slwrb4180a,xg24_dk2601b and xg27_dk2602a boards files
to run chan_blen_transfer, loop_transfer and scatter_gather tests.
Signed-off-by: Martin Hoff <martin.hoff@silabs.com>
Increase test coverage for Raspberry Pi's RP2040. Use the `socs` folder
rather than `boards` to enable these tests to run on any boards with the
same SoCs.
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
Add devicetree node for code RAM, code RAM can be accessed
over AIXM bus or AXIF bus. Code access via AXIF interface
provides the best optimal performance
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
Enable dma boards/test for S32Z270.
The non-cacheable memory used for DMA tests (chan_blen_transfer and
loop_transfer) is split from the system SRAM.
Signed-off-by: Ha Duong Quang <ha.duongquang@nxp.com>
This allows to run the test 'chan_blen_transfer' and 'loop_transfer' on
the sgrm board.
The functionality tested in `chan_link_transfer` and `scatter_gather` is
not (yet) supported by the Si32 DMA driver, and those tests therefore
not enabled.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
The Buffer data was being stored in cacheable memory for
the MIMXRT1010_EVK, the caching is not handle in these
test and cause mimxrt1010 to fail, this commit moves the
memory region to DTCM and in some cases lowers the size
of the DATA Buffer since it won't fit in DTCM for MIMXRT1010_EVK
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
This allows to run the test 'chan_blen_transfer' and 'loop_transfer' on
the sim3u1xx_dk board.
The functionality tested in `chan_link_transfer` and `scatter_gather` is
not (yet) supported by the Si32 DMA driver, and those tests therefore
not enabled.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This commit moves the test buffer from ITCM (not accessible by DMA) to DTCM
on several NXP boards, to make the test successful.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
This commit places the chan_blen_transfer DMA test's TX and RX buffers
in a separate file that gets entirely relocated. This ensures that the
buffers reside in the correct memory, without breaking other things
due to relocation of test data/code.
Fixes#75676.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Move samples config files from 'boards' to 'socs' in order to
remove multiple files with the same configuration and render
available samples for new boards. Only changed sample files
which are not board or hardware specific.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Enable 'chan_blen_transfer' and 'loop_transfer' tests for MAX32670EVKIT.
Co-authored-by: Maureen Helm <maureen.helm@analog.com>
Signed-off-by: Mert Ekren <mert.ekren@analog.com>
This commit removes the const qualifier from TX (source) buffer
of the chan_blen_transfer DMA test to ensure it gets placed in
RAM rather than flash. This ensures the test can pass on hardware
where the DMA controller is unable to access flash.
Fixes#75125.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
A collection of simple enablements to match some of the enablement
done for rd_rw612_bga as closely as possible on the frdm_rw612 board.
- i2c
- spi
- dma
- mrt
- ctimer
- os timer
- dac
- adc
- trng (alread was enabled but now listed support)
- watchdog
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Various SoCs have different limitations when it comes to DMA buffer
sizes. This change allows to chose a suitable value for them.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
When the needed functionality is not available, its test should be
skipped, not passed.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
There are several esp32-based boards that its conf and overlay
files are missing proper renaming to match cpu cluster.
This also removes all _SOC_ name from files.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Previously the logic was inverted for error_callback_en where 0 was
enablement and 1 was disable. This was likely done so that the default,
sensibly so, was to enable the error callback if possible. A variety of
in tree users had confused the enable/disable value.
Change the name of the flag to error_callback_dis where the default
remains 0 (do not disable the callback!) and correct in tree uses of the
flag where it seemed incorrect.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
