Fixing typo from the original implementation in
44705b698c725166834f19d6fd5db2804f9a0d60, which resulted in
the name of current shell instance getting print over and over
again.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
`smp_shell_input_timeout_handler`. Create a public function in
the `shell_uart.c` for it to get the pointer to the
`smp_shell_data` and fix the compilation error.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
When UART asynchronous API support was added to shell it was set up
to be the default one and was turning on asynchronous API if it was
supported. However, it may lead to complation failures if device
requires additional setup for asynchronous UART (e.g DMA in device
tree). Becuase of that, it is reverted back to use interrupt driven
API and use asynchronous API if it is already enabled in the
application.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Fixing compilation failure due to treating void pointer as uint8_t
array. Added missing casting.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Rework UART backend to clearly use single instance approach as
before it was a bit messy with some parts of implementation indicating
multi-instance approach and some single instance. Backend has been
around for years and multi-instance requirement never came.
Added support for UART asynchronous API which is more efficient
in terms of power consumption and performance. Asynchronous API
support is using uart_async_rx helper module for handling data
received asynchronously.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
It declares a variable inside a switch statement without brackets to
properly delimit the scope, making clang barf. This patch adds them.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Adding support for echo option if telnet commands are supported. This is
useful when the telnet client is in character mode. It allows to use the
arrow keys, ctrl-c and more. Something to keep in mind is that when
character mode is turned on by the client, network traffic is
considerably increased as each typed character is sent over the wire.
Note: echo mode is only supported if SHELL_TELNET_SUPPORT_COMMAND is
enabled.
Signed-off-by: David Corbeil <david.corbeil@dynon.com>
The shell name defined with `SHELL_DEFINE` is implicitly
guaranteed to be unique while it is possible that more than one
shell backends can have the same prompt.
Print the name of the shell backend alongside with its prompt
to differentiate between the backends.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Added some new APIs to get the backend instances more easily,
so that dev does not need to rely on `shell_backend_*_get_ptr`,
which looks more like a hack to access a local variable.
These APIs are basically copied from the log backend
implementation.
Added testcase for the APIs.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Rename the shell backend `thread_name` variable to just `name`,
to be used for other things not specific to thread later.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Compiler can't tell that k_thread_abort() won't return and issues a
warning unless we tell it that control never gets this far.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
HAS_DTS has become a redundant option. All Zephyr architectures now
select this option, meaning devicetree has become a de-facto
requirement. In fact, if any board does not provide a devicetree
source, the build system uses an empty stub, meaning the devicetree
machinery always runs.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Added a condition to check if the size of the copied
memory is a positive number.
Fixes#58700Fixes#58703
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@verkada.com>
The connectivity monitoring subfeature of conn_mgr is currently also
named conn_mgr, which is confusing.
This commit renames it to conn_mgr_monitor, or conn_mgr_mon for short,
for clarity.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Set correct SHELL_BACKEND_SERIAL_INIT_PRIORITY if ACPI is enabled.
Otherwise when enabling SHELL using menuconfig, etc serial backend is
not working.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The default stack size is too small on 64bit.
Some standard shell commands cause stack overflow
Signed-off-by: Grant Ramsay <gramsay@enphaseenergy.com>
The RTT backend of the shell does not support several of the more
advanced terminal features. This commit proposes to inactivate these
features by default when RTT is selected as shell backend.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Device dependencies are not always required, so make them optional via
CONFIG_DEVICE_DEPS. When enabled, the gen_device_deps script will run so
that dependencies are collected and part of the final image. Related
APIs will be also made available. Since device dependencies are used in
just a few places (power domains), disable the feature by default. When
not enabled, a second linking pass will not be required.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
call k_thread_foreach_unlocked to avoid assertions caused
by calling shell_print while holding a global lock
Signed-off-by: Maxim Adelman <imax@meta.com>
shell_strtoull used a unsigned long instead of a unsigned
long long to store the result in stroull, so the return
value may have been truncated.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Without this fix, for every call to shell_vfprintf,
a prompt string and vt100 codes are printed too,
resulting in mangled log output.
Signed-off-by: Lars Knudsen <lakd@demant.com>
Add a shell_strtoull function that works similar to
shell_strtoul except that it calls strtoull instead
of strtoul.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Until now iterable sections APIs have been part of the toolchain
(common) headers. They are not strictly related to a toolchain, they
just rely on linker providing support for sections. Most files relied on
indirect includes to access the API, now, it is included as needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
While it may be useful in some contexts, this information can be
obtained at compile time. Removing this command allows to migrate the
device infrastructure code to standard iterable sections, done later.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Since conn_mgr is a subsystem rather than a library, relocate it
directly into subsys/net rather than subsys/net/lib/
Rename header files to better match their function.
Remove net_ prefix from conn_mgr types, API, and files, since it is
unnecessary.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
This change to the shell API enables the user to retrieve the
return code of the most recently run shell command. This is
useful both for users wanting specific information beyond the print
statements in a command, but especially for automated users
that prefer a simple return code to parsing human readable text.
This was tested using all default shell commands, as well as
eeprom, flash, and i2c, where specific errors could be forced.
In all cases, the correct return value was returned by the new
retval command.
Signed-off-by: Hunter Searle <hsearle@xes-inc.com>
Convert handling of shell_root_cmds, shell_subcmds, and
shell_dynamic_subcmds to use iterable section macros.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
MISRA Rule 5.7 requires uniqueness of tag identifiers. Shell is
frequently problematic because many code uses `const struct shell
*shell`. This causes CI noise every time one of these shell files is
edited, so let's update all of them with `const struct shell *sh`
instead.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This new configuration option, SHELL_BACKEND_RTT_BUFFER, allows selecting
an alternative buffer for the Shell's RTT backend. By default buffer 0 is
used, which conflicts with the default logging subsystem RTT backend
buffer.
This option is the counterpart to the logger's LOG_BACKEND_RTT_BUFFER.
Signed-off-by: Maurits Fassaert <maurits.fassaert@sensorfy.ai>
The init infrastructure, found in `init.h`, is currently used by:
- `SYS_INIT`: to call functions before `main`
- `DEVICE_*`: to initialize devices
They are all sorted according to an initialization level + a priority.
`SYS_INIT` calls are really orthogonal to devices, however, the required
function signature requires a `const struct device *dev` as a first
argument. The only reason for that is because the same init machinery is
used by devices, so we have something like:
```c
struct init_entry {
int (*init)(const struct device *dev);
/* only set by DEVICE_*, otherwise NULL */
const struct device *dev;
}
```
As a result, we end up with such weird/ugly pattern:
```c
static int my_init(const struct device *dev)
{
/* always NULL! add ARG_UNUSED to avoid compiler warning */
ARG_UNUSED(dev);
...
}
```
This is really a result of poor internals isolation. This patch proposes
a to make init entries more flexible so that they can accept sytem
initialization calls like this:
```c
static int my_init(void)
{
...
}
```
This is achieved using a union:
```c
union init_function {
/* for SYS_INIT, used when init_entry.dev == NULL */
int (*sys)(void);
/* for DEVICE*, used when init_entry.dev != NULL */
int (*dev)(const struct device *dev);
};
struct init_entry {
/* stores init function (either for SYS_INIT or DEVICE*)
union init_function init_fn;
/* stores device pointer for DEVICE*, NULL for SYS_INIT. Allows
* to know which union entry to call.
*/
const struct device *dev;
}
```
This solution **does not increase ROM usage**, and allows to offer clean
public APIs for both SYS_INIT and DEVICE*. Note that however, init
machinery keeps a coupling with devices.
**NOTE**: This is a breaking change! All `SYS_INIT` functions will need
to be converted to the new signature. See the script offered in the
following commit.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
init: convert SYS_INIT functions to the new signature
Conversion scripted using scripts/utils/migrate_sys_init.py.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
manifest: update projects for SYS_INIT changes
Update modules with updated SYS_INIT calls:
- hal_ti
- lvgl
- sof
- TraceRecorderSource
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: devicetree: devices: adjust test
Adjust test according to the recently introduced SYS_INIT
infrastructure.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: kernel: threads: adjust SYS_INIT call
Adjust to the new signature: int (*init_fn)(void);
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Struct sh_telnet should be initialised before first function call.
Right now there is a possibility that telnet_accept function will
be called before memset.
Signed-off-by: Wojciech Slenska <wsl@trackunit.com>
Fail compilation when incorrect configuration is detected, i.e. when
SHELL_BACKEND_SERIAL_CHECK_DTR is set but UART_LINE_CTRL is not set.
Use periodic timer to wait for DTR instead of waiting in uart callback
to prevent blocking caller workqueue and/or sleeping in ISR.
DTR check was only ever supported with interrupt driven backend so add
appropriate depends on to Kconfig.
Fixes: e9f238889b ("shell: uart: Add waiting on DTR signal before
sending data")
Fixes: #47120Fixes: #54705
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
We get compile warnings of the form:
error: converting the result of
'<<' to a boolean; did you mean
'((__aeabi_ctype_table_ + 1)[(byte)] << 28) != 0'?
[-Werror,-Wint-in-bool-context]
if (!isprint(byte)) {
^
Since isprint (and the other is* functions) return an int, change check
to an explicit test against the return value.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Adds a device pm_toggle shell command which calls pm_runtime_device
functions put and get to toggle the runtime power state.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
We get compile warnings of the form:
drivers/console/uart_console.c:508:8: error: converting the result of
'<<' to a boolean; did you mean
'((__aeabi_ctype_table_ + 1)[(byte)] << 28) != 0'?
[-Werror,-Wint-in-bool-context]
if (!isprint(byte)) {
^
Since isprint returns an int, change check to an explicit test against
the return value.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
This change fixes code to match the description in
https://github.com/zephyrproject-rtos/zephyr/pull/55061
(see commit 9ecef4b).
This preserves the previous default behaviour of the
shell dummy backend.
Signed-off-by: Nick Ward <nix.ward@gmail.com>
Dummy shell was always started with log backend enabled with filter
statically set to INFO level.
AFAIK no use of such log backend can be made, thus causing waste of
resources.
The new changes keep INFO as the default filter level. In order to
disable log backend to be attached to the Dummy shell,
CONFIG_SHELL_DUMMY_INIT_LOG_LEVEL_NONE has to be set.
Signed-off-by: Marco Argiolas <marco.argiolas@ftpsolutions.com.au>
This fixes an issue whereby when USB CDC is used for receiving MCUmgr
commands, the commands are corrupted, invalid or messed up by
increasing the receive buffer size so that it can handle at least 1
full MCUmgr fragment.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
If bypass mode is left outside of the registered bypass handler, the
command buffer was not cleared, basically containig leftovers from the
processing of the previous command. This resulted in undefined behaviour
on consecutive shell operations.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In some applications, there is a need to don't start the shell by
default, but run it later on some special condition.
When SHELL_AUTOSTART is set to n, the shell is not started after
boot but can be enabled later from the application code.
Signed-off-by: Wojciech Slenska <wsl@trackunit.com>
188d2dfcca introduced a change where log message queue again
become configurable through Kconfig instead of being fixed in
the code. However, it updated only the configuration of an UART
backend. This commit updates other backends as well. Including
dummy backend which has fixed in the code value.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This allows the caller to dump a region of memory rather than
dumping one byte (word, etc) at a time. Additionally, it
respects alignment requirements so it works for e.g. 32-bit
register accesses.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
This seems to have caused build failures in spite
of CI passing in PR 52653.
This reverts commit 0a02a4a2af.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
If LOG_PRINTK is used then the buffer size needs to be larger to
account for the additional header/footer output from the shell.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Use LOG_MESSAGE_QUEUE_SIZE config instead of hardcoded value.
LOG_MESSAGE_QUEUE_SIZE default value has been changed to 512, so
it is now matching to the hardcoded value.
Signed-off-by: Wojciech Slenska <wsl@trackunit.com>
Change for loops of the form:
for (i = 0; i < CONFIG_MP_NUM_CPUS; i++)
...
to
unsigned int num_cpus = arch_num_cpus();
for (i = 0; i < num_cpus; i++)
...
We do the call outside of the for loop so that it only happens once,
rather than on every iteration.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
The device_service shell was missing the capability to list devices
registered in the EARLY init level.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Changes in device_service have triggered MISRA 5.7 violation CI error
(Tag name should be unique). Renamed shell to sh, same as some other
modules.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The _SYS_INIT_LEVEL* definitions were used to indicate the index entry
into the levels array defined in init.c (z_sys_init_run_level). init.c
uses this information internally, so there is no point in exposing this
in a public header. It has been replaced with an enum inside init.c. The
device shell was re-using the same defines to index its own array. This
is a fragile design, the shell needs to be responsible of its own data
indexing. A similar situation happened with some unit tests.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
`wait()` returns the retval of `zsock_poll()` which can be
negative but is currently unhandled.
This patch make sure that the error will be handled.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Minor MISRA-related fixes so that the conditionals are boolean
and precedence of statements are explicit.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Tests with shell commands will fail if they are started
before the shell backend is initialized or started.
Adding API function: shell_ready indicating shell readiness.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add option to control formatting of the logging timestamp. By default
formatting is enabled which maintains backward compatibility.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
When shell was used as a log backend it did not enabled log_output
module used for string formatting. Adding missing dependency.
Original commit (b0072e1cea) was
reverted, reappling.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Increase deafult value of SHELL_ARGC_MAX configuration.
This allows users to utilize deeper nested shell menus without
risking maxing out the number of allowed arguments.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
When shell was used as a log backend it did not enabled log_output
module used for string formatting. Adding missing dependency.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Previous code provided incorrect argc value to handlers when a command
used SHELL_OPT_ARG_RAW option.
Fixes#48380
Signed-off-by: Eric Johnson <eric.johnson2@walgreens.com>
Many device pointers are initialized at compile and never changed. This
means that the device pointer can be constified (immutable).
Automated using:
```
perl -i -pe 's/const struct device \*(?!const)(.*)= DEVICE/const struct
device *const $1= DEVICE/g' **/*.c
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
It is frequent to find variable definitions like this:
```c
static const struct device *dev = DEVICE_DT_GET(...)
```
That is, module level variables that are statically initialized with a
device reference. Such value is, in most cases, never changed meaning
the variable can also be declared as const (immutable). This patch
constifies all such cases.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use `kernel log-level modulename severity`
Also enable it for the Bluetooth Shell.
Then one can compile-in a lot of BT modules like so:
CONFIG_BT_DEBUG_HCI_CORE=y
CONFIG_BT_DEBUG_L2CAP=y
CONFIG_BT_DEBUG_ATT=y
CONFIG_BT_DEBUG_GATT=y
And at runtime select only, e.g. GATT
kernel log-level bt_hci_core 0
kernel log-level bt_l2cap 0
kernel log-level bt_att 0
And then re-enable L2CAP if needed later
kernel log-level bt_l2cap 4
And so on..
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
When LOG_MODE_IMMEDIATE is used, logs processed by the shell
log backend may be intertwined with messages printed by
shell commands running on the shell thread.
It is because the shell uses a mutex while the shell log
backend uses the IRQ lock for synchronization. Switch the
latter to use the mutex as well whenever it's possible.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Renaming objects which had 2 in the name to indicate that
it is v2 specific. Once logging v1 has been removed such
suffixes are redundant.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Logging v1 has been removed and log_strdup wrapper function is no
longer needed. Removing the function and its use in the tree.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This commit corrects all `extern K_KERNEL_STACK_ARRAY_DEFINE` macro
usages to use the `K_KERNEL_STACK_ARRAY_DECLARE` macro instead.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Remove v1 implementation from log_core and all references in the tree.
Remove modules used by v1: log_list and log_msg.
Remove Kconfig v1 specific options.
Remove Kconfig flags used for distinction between v1 and v2.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
If CONFIG_SHELL_STATS is disabled, shell->stats is NULL and
must not be dereferenced. Guard against it.
Fixes#44089
Signed-off-by: Alexej Rempel <Alexej.Rempel@de.eckerle-gruppe.com>
If the echo flag is disabled the cmd_buff isn't printed and the
characters in it must not be counted in this function.
Signed-off-by: Gerhard Jörges <joerges@metratec.com>
In order to bring consistency in-tree, migrate all subsystems code to
the new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fixed the issue when sometimes "update" is not called for the
last RXRDY signal. First, need to reset the signal and only
after that need to call the "update" function.
Signed-off-by: Yuriy Vynnychek <yura.vynnychek@telink-semi.com>
Added macro SHELL_SUBCMD_SET_CREATE which creates a set of subcommands.
SHELL_SUBCMD_ADD and SHELL_SUBCMD_COND_ADD can be used from any file to
add command to the set. This approach allows to have subcommands added
from multiple files.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
When threads are in more than one state at a time, k_thread_state_str()
returns a string that lists each of its states delimited by a '+'.
This in turn necessitates a change to the API that includes both a
pointer to the buffer to use for the string and the size of the buffer.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Commit f7c4fe6778 ("shell: optimize history storage a bit") forgot
to distinguish between the newly allocated history item and the previous
one, causing havoc on ring buffer wraparounds with excess padding.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
When padding is added to "fill" the gap in order to wrap to the
beginning of the ring buffer, such padding is attributed to the
current item being added. Let's attribute it to the previous entry
instead so it'll be freed along with that entry and make the space
available one entry sooner, increasing the chances for keeping the
current entry around longer.
If ring buffer is empty then always reset it up front to get best
alignment right away i.e. beginning of buffer.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
As the receive window is now decreased at the TCP module level, other
direct net_context users are also responsible for acknowledging the
received data with net_context_update_recv_wnd() - otherwise, the
communication will stall.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Make it possible to "finish" with fewer bytes than what was "claimed".
This was possible before on the get side, but the put side was
cummulative wrt finish. The revamp made it cummulative on both sides.
Turns out that existing users rely on the opposite behavior which is
more logical and useful. So make both sides that way.
Adjust documentation, test case and users accordingly.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
No ring_buf_get_finish() should be performed on ring_buf memory that
wasn't claimed beforehand. Using ring_buf_get() with a NULL destination
does both the claim and the finish part without retrieving anything.
This is especially important with the ring_buffer revanp where the above
is enforced for proper operation.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
If the item has name but no help, there's no need to fill
shell with tabulators and colon at the end of the line.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
Use dedicated function for calculating stack usage of the
interrupt stack(s).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Reduced logging mode selection to deferred, immediate, minimal and
frontend. Decoupled logging version from mode and created CONFIG_LOG1
which can be used to explicitly select deprecated version.
From now on, chosing CONFIG_LOG_MODE_{IMMEDIATE,DEFERRED} will result
in version2.
Deprecated CONFIG_LOG2_MODE_{IMMEDIATE,DEFERRED} with cmake warning.
Codebase adapted to those changes.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Updates the kernel service to display the extended thread
runtime stats when the following shell command is issued.
kernel threads
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Getopt has been rework in this way that calling it does not require
extra state parameter and its execution is thread safe.
Global parameters describing the state of the getopt function have been
made available to ensure full API compatibility in using this library.
However, referencing these global variables directly is not thread
safe. In order to get the state of the getopt function for the thread
that is currently using it, call: getopt_state_get();
Extended the library with getopt_long and getopt_long_only functions.
Moved getopt libary from utils to posix.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
When logging is using immediate mode then logging messages
can be processed from any context, including interrupt context.
z_shell_fprintf was asserting in that case since it allowed to
be called from interrupt context only when logging was in panic
mode. However, shell works in the same way when logging is in
immediate mode as in panic mode.
Renamed internal shell flag from panic_mode to sync_mode. Flag
is also set when shell log backend is started in synchronous
mode (immediate logging) which prevents assertion.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The device PM subsystem _depends_ on device, not vice-versa. Devices
only hold a reference to struct pm_device now, and initialize this
reference with the value provided in Z_DEVICE_DEFINE. This requirement
can be solved with a forward struct declaration, meaning there is no
need to include device PM headers.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Remove LOG_MINIMAL kconfig option which was confusing
since LOG_MODE_MINIMAL existed. LOG_MINIMAL was used to
force minimal mode but because of invalid dependencies
it was leading to issues.
Refactored code to use LOG_MODE_MINIMAL everywhere and
renamed LOG_MINIMAL to LOG_DEFAULT_MINIMAL which has impact
on defualt logging mode (which still can be later changed
in conf file or in menuconfig).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Since there are no more users and dependencies of
Kconfig option USB_UART_CONSOLE in the tree,
remove the remains and the option USB_UART_CONSOLE.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The print specifier for `atomic_t` should be updated
to `%ld`, `%lu`, or `%lx` to account for the type
change of `atomic_t` to `long`.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
When telnet client queries about remote echo support, we reply that we
won't do it (which reduces the traffic), however the echo was not
actually disabled on the shell. In result characters were double-echoed
in the character mode (by both local echo from the client and remote
echo from the server).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case multiple commands were sent in a single packet, only the first
one was processed. Fix this by processing them in a loop.
As the subnegotiation command have variable length, and we currently
don't have any support for subnegotiation, stop processing packet when
such a command occurs.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This change organizes the file structure for the shell.
Files implementing backends are moved to a separate folder.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Fixed compilatione error when shell sample has been build with flag
CONFIG_SHELL_VT100_COMMANDS set to n.
Fixes: #40124
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
With the introduction of `EXPERIMENTAL` and `WARN_EXPERIMENTAL` in
Zephyr all subsys/shell settings having `[EXPERIMENTAL]` in their
prompt has has been updated to include `select EXPERIMENTAL` so that
developers can enable warnings when experimental features are enabled.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add __printf_like modifier to validate strings used by shell.
Fixing warnings triggered by this change.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
In panic mode, the function: z_shell_fprintf is expected to be
called from an interrupt context. Therefore, the dedicated assert
cannot be checked in this case.
Fixes#38612
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Each backend can configure separately features like colors on/off, VT100
handling and so on. This can be very handy for planned MQTT backend.
Shell will not send VT100 commands when VT100 is not enabled globally or
for particular backend.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
VT100 commands are now stored as strings rather than character arrays.
This change will make it easier to create a unified macro for sending
all VT100 commands.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
This patch fixes the issue that can cause a deadlock in shell.
When two threads simultaneously poll the TXDONE signal, only one
of them will receive it, leaving second one stalled.
The problem was that shell's context contains k_poll_event objects that
were polled by multiple threads. Polling it overwrites the poller field
that was set by previous thread.
Instead, the k_poll_event object must be created on the stack by every
thread that wants to poll the TXDONE signal.
This makes sure that no thread will be left waiting for this signal
forever.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
Problem:
In some cases, as described in: https://github.com/zephyrproject-rtos/zephyr/issues/36948
shell backend sends characters to output before serial device
is ready for it. It results in observing additional characters
inserted on the shell input after device boot.
Solution:
Added waiting on DTR signal before sending anything to the output.
Fixes: #36948
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
We get build issues due to the removal of the Kconfig symbol
CONFIG_UART_SHELL_ON_DEV_NAME on platforms that didn't have a uart
set as we'd get a default value for those platforms. Update the
Kconfig logic to only enable SHELL_BACKEND_SERIAL if we have
zephyr,shell-uart specified in the devicetree to address the issue.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Follow up on commit bfd45e5b8c
("drivers: remove Kconfig option CONFIG_UART_CONSOLE_ON_DEV_NAME")
Now we can also remove Kconfig option CONFIG_UART_CONSOLE_ON_DEV_NAME
since all UART drivers are converted to devicetree and we can just use
DEVICE_DT_GET(DT_CHOSEN(zephyr_shell_uart)).
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This commit adds a devmem load command for shell that allows
users to easily load arbitrary data into the device memory.
Signed-off-by: Mateusz Sierszulski <msierszulski@internships.antmicro.com>
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
This migrates all the current iterable section usages to the external
API, dropping the "Z_" prefix:
Z_ITERABLE_SECTION_ROM
Z_ITERABLE_SECTION_ROM_GC_ALLOWED
Z_ITERABLE_SECTION_RAM
Z_ITERABLE_SECTION_RAM_GC_ALLOWED
Z_STRUCT_SECTION_ITERABLE
Z_STRUCT_SECTION_ITERABLE_ALTERNATE
Z_STRUCT_SECTION_FOREACH
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The function to execute shell commands: shell_execute_cmd will now
behave similarly to invoking command line commands.
I.e. after the command is executed the command buffer is cleared,
while the cursor is set to the initial position.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Currently, in Zephyr the shell thread is the lowest priority i.e.
K_LOWEST_APPLICATION_THREAD_PRIO. Due to this all the other threads can
preempt the shell thread. Proposed solution is to add Kconfig which
gives the flexibility to change the priority of the shell thread.
This is now implemented using a new Kconfig variable
SHELL_THREAD_PRIORITY_OVERRIDE. By setting this option
SHELL_THREAD_PRIORITY can be set.
Signed-off-by: Uday Ammu <udaykiran@google.com>
All variables for address, width and value are unsigned, so use strtoul
instead of strtol. This fixes an issue when 0xffffffff is about to be
assigned to specific address, which was truncated to 0x7fffffff so far.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
