Move overlays and conf from boards to socs in following samples :
- samples/drivers/adc/adc_dt
- samples/drivers/counter/alarm
- samples/drivers/dac
- samples/subsys/settings
Signed-off-by: Marek Matej <marek.matej@espressif.com>
add more samples
Signed-off-by: Marek Matej <marek.matej@espressif.com>
The sample defines an image that uses RAMdisk and also provides an
option to enable USB DFU flash backend for the "slot-1" flash partition.
Assuming the user runs this sample from the slot-0 partition, uploading
to flash should work fine for evaluation purposes.
If the sample is built with CONFIG_BOOTLOADER_MCUBOOT=y, the sample will
mark the image in slot 1 as pending after an image download.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
In the usbd_register_all_classes(), we may need to skip some instances
as they may have very specific function like USB DFU "DFU mode" which
should not be available by default.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add support for xg24_rb4187c to the ADC sample app. Configure two
channels, one measuring the AVDD supply against the 1.21V bandgap
reference, and one measuring pin PB1 (wired to button 0) against
the AVDD (VDDX) reference.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Add a sample application that demonstrates how to use the new USB-MIDI 2.0
device class. This shows how to set up the device tree, how to exchange
MIDI data with the host, and how to use the data accessors provided by
the new API.
Signed-off-by: Titouan Christophe <moiandme@gmail.com>
The sample app draws rectangles in the corner of the display.
On devices with the SCREEN_INFO_X_ALIGNMENT_WIDTH capability,
each draw needs to transmit a complete line. Make the sample
work on such displays (e.g. the `ls0xx` driver) by making the
rectangles take up the full width of the display.
Co-authored-by: Benjamin Cabé <kartben@gmail.com>
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Remove ADC2 support (identified as adc1 entry)
for additional ESP32-C3 based board targets.
Other boards have those instances already deleted.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
nRF5340 SoC supports retained_mem driver, which can be
utilized for RAM retention in System OFF sleep mode.
Add sample configuration confirming this.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Modify the BAP Broadcast source sample to use the next USB stack.
For simplicity, the changes are minimum and will still do the
same downsampling, and thus use a fixed 48KHz audio input.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
PR #77335 intended to remove sensor
specific samples and missed a readme file.
This commit removes that file and empty directory.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
The user of the ft8xx driver can register a callback function called
on a touch detection interrupt event. This function is extended to
include a user-defined pointer. The user-defined pointer helps to share
a callback with multiple driver instances.
Signed-off-by: Hubert Miś <hubert.mis@gmail.com>
Improve the FT8xx display driver to support multiple driver instances.
The ft8xx_reference_api.h still follows the FT8xx programming guides,
limiting the usage of the driver to one instance.
Signed-off-by: Hubert Miś <hubert.mis@gmail.com>
There's no point building the sample for platforms that do not support
networking, hence add netif dependency to reduce the CI execution
scope.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Adds support for testing sensor shell streaming
on the vmu_rt1170 with RTIO.
Co-Authored-by: James Goppert <james.goppert@gmail.com>
Signed-off-by: Benjamin Perseghetti <bperseghetti@rudislabs.com>
Hello world from the tests is no longer what it once was, a simple
hello_world function that prints. The sample was here to let people
explore and learn about how LLEXT and ELFs work.
Moving the sample extension code to the shell loader sample disconnects
the two and lets the sample remain simpler.
We use the new CONFIG_LLEXT_IMPORT_ALL_GLOBALS to show how to build
an extension with and without the Zephyr build system.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
This allows us to use the testusb Linux kernel tool again. All tests
involving control and bulk transfers should pass. Additionally, add a
shell command that allows the user to manually enqueue bulk transfers.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
A _res_fallback parameter to HTTP_SERVICE_DEFINE is added to optionally
specify a fallback resource detail, which will be served if no other
resource matches the URL.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
This issue is seen by at least gcc 11.4.0
samples/net/sockets/http_get/src/http_get.c:44:40: warning:
format ‘%d’ expects argument of type ‘int’, but argument 2
has type ‘ssize_t’ {aka ‘long int’} [-Wformat=]
44 | #define CHECK(r) { if (r < 0) {
| printf("Error: %d\n", r); exit(1); } }
| ^~~~~~~~~~~~~
samples/net/sockets/http_get/src/http_get.c:44:49: note: format string is
defined here
44 | #define CHECK(r) { if (r < 0) {
printf("Error: %d\n", r); exit(1); } }
| ~^
| |
| int
| %ld
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add overlays for nrf54h20dk_nrf54h20_cpuppr. Moved common configuration
for nrf54h20dk to nrf54h20dk_nrf54h20_common.dtsi. Add configuration
for vpr_launcher on nrf54h20dk_nrf54h20_cpuapp.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Added initial CCP client implementation that simply
does discovery of TBS on a remote CCP server.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
-Mbed TLS requires common.h to build. The sample provides common.h
in sample folder level but included the path to zephyr_interface.
This commit changes the include to be sample-specific
Signed-off-by: Frank Audun Kvamtrø <frank.kvamtro@nordicsemi.no>
We need to call `bt_le_adv_start()` again to make sure the device remains
connectable after a disconnection event. The appropriate place to do it is
in the `recycled()` callback.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
LLEXT-related files are currently scattered in multiple locations in the
build directory. For easier access, this patch groups the outputs in a
subdirectory named 'llext' at the root of the build binaries, alongside
the 'zephyr' directory. This directory will thus contain the generated
debug ELF and the final .llext file for each compiled extension.
Note that this does not affect out-of-tree projects that use LLEXT,
since they already pass the full LLEXT file path to add_llext_target().
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
The dfu sample filter seems not to work. It should select only boards
when slot0_partition and slot1_partition are define.
filter:
dt_label_with_parent_compat_enabled("slot0_partition",
"fixed-partitions")
and dt_label_with_parent_compat_enabled("slot1_partition",
"fixed-partitions")
and dt_chosen_enabled("zephyr,flash-controller")
and CONFIG_FLASH_HAS_DRIVER_ENABLED
This means that sam4l_ek, same54_xpro and samr21_xpro should never be
selected because the final devicetree is defined without those
partitions. See below fragment from same54_xpro:
nvmctrl: nvmctrl@41004000 {
compatible = "atmel,sam0-nvmctrl";
reg = < 0x41004000 0x22 >;
interrupts = < 0x1d 0x0 >, < 0x1e 0x0 >;
#address-cells = < 0x1 >;
#size-cells = < 0x1 >;
lock-regions = < 0x20 >;
flash0: flash@0 {
compatible = "soc-nv-flash";
write-block-size = < 0x8 >;
reg = < 0x0 0x100000 >;
partitions {
compatible = "fixed-partitions";
#address-cells = < 0x1 >;
#size-cells = < 0x1 >;
storage_partition: partition@fc000 {
label = "storage";
reg = < 0xfc000 0x4000 >;
};
};
};
};
This excludes same54_xpro and samr21_xpro to avoid ci issues until ci
filter is fixed.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Rename video_fourcc() to VIDEO_FOURCC(), differing from the Linux
implementation, but more compliant with the coding style.
Also introduce a VIDEO_FOURCC_FROM_STR() to generate a FOURCC format
code out of a 4-characters string.
Signed-off-by: Josuah Demangeon <me@josuah.net>
Add a interface-name string for the CDC-ACM node, this allow setting a
string that is then set as iInterface, which can then be used downstream
in an udev rule such as:
SUBSYSTEM=="tty", ACTION=="add",
ATTRS{interface}=="my interface descriptor",
SYMLINK+="tty-my-device"
To create known aliases for these ports.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
To request heap statistics, a pointer to a heap structure is required.
This is straightforward for a user-defined heap. However, such a pointer
is not known for heaps created by other components or libraries, like
libc. Therefore, it is not possible to calculate the total heap memory.
The proposed solution is to use an array of pointers, which is filled in
on every sys_heap_init() call. One can then iterate through it to sum up
the total memory allocated for all heaps.
The array size is configurable. The default array size is zero,
which means the feature is disabled. Any other integer greater then zero
defines the array size and enables the feature.
A list of pointers instead of an array could be another approach,
but it requeres a heap, which is not always available.
Signed-off-by: Ivan Pankratov <ivan.pankratov@silabs.com>
Remove the HCI command & event emulation layer for ECDH commands and
events. This means that we always do the necessary operations in the host.
The existing BT_ECC Kconfig option stays, but now gets automatically
enabled when necessary (e.g. based on the BT_SMP option), which is why this
commit removes so many explicit assignments in prj.conf files.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Added option to set the PACS Characteristics through the bap API,
making PACS configuration runtime available. Source and Sink PAC, as
well as Source/Sink PAC Location is can be set through a register
function in the PACS api.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Change the name of the mimxrt1060_evk conf file (mimxrt1060_evk.conf) to
the correct name, "mimxrt1060_evk_mimxrt1062_qspi.conf". This change
causes net related code to be placed into ITCM on mimxrt1060_evk boards
Signed-off-by: Jacob Wienecke <jacob.wienecke@nxp.com>
Add the nucleo_wba55cg board, which implements continuous transfer
with GPDMA and a linked list.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Updated the README for the LoRaWAN Class A example to explain limitations
when running multiple times. Provided guidance to resolve the issue.
Signed-off-by: Flavio Felder <felf@zhaw.ch>
The tests for settings will not work properly with just provided config
file for mimxrt1020:
west build -p always -b mimxrt1020_evk samples/subsys/settings
as there the settings_save_one() would return -2 (-ENOENT) as by default
the CONFIG_SETTINGS_NONE is defined for mimxrt1020 configuration.
For proper operation (i.e. to have a memory medium to store settings
values) the NVS backend needs to be enabled.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
In order to show how to use OpenThread and CoAP, add an application.
This example could be build to run a client or server.
The server could expose LEDs and buttons and client could get their
state and set the LEDs state.
The network is created automatically using the network key predefined
in the config. The goal is to make the example simple by removing
the commisionning and joinning process.
If a client application has a button, it could use it to toggle the first
LED on any boards running the server application.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Application won't wakeup without external trigger in
the analog comparator wakeup configuration.
Therefore removing post-wakeup lines from sample regex as they are not
expected to occur in default testing scenario (without external triggers).
Signed-off-by: Bartlomiej Buczek <bartlomiej.buczek@nordicsemi.no>
This sample is expected to hit google.com so that the reply
(a redirect) is minimal and can easily be visualized. This is also
what sample.yaml expects to see (checks for "The document has
moved").
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
tfm_regression_test depends on the tf-m-tests
tfm_psa_test depends on the psa-arch-tests
This commit set module dependencies to correct values
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Add support for the pinnacle_100_dvk and mg100.
With these boards, wait to get on the network before trying
to connect to AWS.
Signed-off-by: Ryan Erickson <ryan.erickson@ezurio.com>
Add overlay and small adjustments for using the hl7800 modem.
Works out of the box with pinnacle_100_dvk and mg100.
Signed-off-by: Ryan Erickson <ryan.erickson@ezurio.com>
Add an overlay for hl7800 modem configuration.
Adjust the client to wait until the network is ready before
trying to connect to the lwm2m server.
Signed-off-by: Ryan Erickson <ryan.erickson@ezurio.com>
Using NET_TCP_MAX_SEND_WINDOW_SIZE and NET_TCP_MAX_RECV_WINDOW_SIZE
for TCP case.
Reduce net_buf count to save memory.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Device adapter strips all whitespace from output lines causing test
failures when matching default shell prompt "uart:~$ " with trailing
space. Update _handle_device_output to only strip line endings (\r\n)
while preserving whitespace required for prompt detection.
A testcase sample.pytest.shell.no_vt100 was added to verify prompt
matching works with CONFIG_SHELL_VT100_COLORS disabled.
Signed-off-by: Thomas Günther <thomas.guenther@limatica.com>
Found while building with clang and -Wtautological-compare:
samples/modules/lvgl/screen_transparency/src/main.c:47:45: error:
bitwise or with non-zero value always evaluates to true
[-Werror,-Wtautological-bitwise-compare]
if (!(display_caps.supported_pixel_formats | PIXEL_FORMAT_ARGB_8888)) {
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
This commit adds support for these multicore samples:
- samples/drivers/mbox
- samples/drivers/mbox_data
- samples/subsys/ipc/ipc_service/static_vrings
- samples/subsys/ipc/openamp
Signed-off-by: Tomas Galbicka <tomas.galbicka@nxp.com>
This examples shows how to use the AD4114 ADC on a
stm32f3_disco board.
As the AD4114 is a 24bits ADC resolution we need to be able
to pass 32bits buffer to get the samples.
CONFIG_SEQUENCE_RESOLUTION is set to 12 instead of 24, and the
gain zephyr,vref-mv is adapted to avoid overflows using the
exisiting adc_raw_to_millivolts function.
Signed-off-by: Pierrick Curt <pierrickcurt@gmail.com>
This commit introduces a new Sensor Clock API, enabling the retrieval
of cycle counts and conversion to nanoseconds based on the system or
external clock. The API includes:
- `sensor_clock_get_cycles()` to get the current cycle count from the
sensor clock.
- `sensor_clock_cycles_to_ns()` to convert cycles to nanoseconds using
the clock's frequency.
The implementation supports both system clocks and external clocks
defined in the device tree, making the sensor clock integration more
flexible for various sensor use cases.
Signed-off-by: Mark Chen <mark.chen@cienet.com>
Add new SENSOR_CHAN_FREQUENCY constant to allow implement sensors that
output frequency values in Hertz.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
The number of mpu regions that can be configured is less than four cases.
Therefore, only remove this case on cm33 cores, failed log show below:
"num_parts of 4 exceeds maximum allowable partitions (3)"
samples: kernel: mem_protect: userspace: remove mimxrt700_evk cm33 cores
The maximum number of partitions is less than the number of partitions
currently required, causing case to be unable to apply for or delete
excess regions.
Signed-off-by: Lucien Zhao <lucien.zhao@nxp.com>
Commit:
- adds dependency of the mbedtls psa usage on secure storage
- removes PSA ITS emulator and enables usage of
the secure storage in ble mesh bsim tests
- enables secure storage in all ble mesh and related samples
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
This sample is designed specifically for the STM32 family.
With this filter, tests on other vendors' platforms will
be skipped.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Disable vt100 commands too in websocket console, not only the coloring.
This allows to prevent printing artifacts in websocket shell backend
logging.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Includes a RTC attribute as counter value to demonstrate
data being kept in memory after deep sleep reset.
This is only valid when MCUboot is enabled.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Add sample to read from up to 10 FIFO streaming devices, using the
sensor_stream() API and the RTIO framework:
https://docs.zephyrproject.org/latest/services/rtio/index.html
The devices has to be aliased as streamN (0 <= N <= 9) in DT, and
will be instantiated using SENSOR_DT_STREAM_IODEV() macro.
Currently the sample gets/prints data on SENSOR_TRIG_FIFO_WATERMARK
trigger basis for the following sensor channels:
- SENSOR_CHAN_ACCEL_XYZ
- SENSOR_CHAN_GYRO_XYZ
- SENSOR_CHAN_DIE_TEMP
- SENSOR_CHAN_GAME_ROTATION_VECTOR
- SENSOR_CHAN_GRAVITY_VECTOR
- SENSOR_CHAN_GBIAS_XYZ
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Loop through all of the channels and make sure that each
channel has an output.
Changes in patch originally present in #72972.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Passing HTTP upgrade request context to the user callback allows the
user to decide whether to accept or reject the websocket connection
based on the HTTP headers in the request. The primary reason for this is
to enable authentication of the websocket connection (e.g. via cookies
or Authorization header).
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
By default OpenThread uses storage API to store configuration options.
On for example mimxrt1020_evk the enabled by default is
CONFIG_SETTINGS_NONE when CONFIG_SETTINGS is enabled. Fix this problem by
using the CONFIG_SETTINGS_NVS=y.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
The CCP API for the Call Control Profile works on top of the
TBS API, and will eventually replace parts of the TBS API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add new test sample.sensor.thermometer_i3c, can't assign the same
platform with i2c, and i3c at the same time.
Support the shield on FRDM_MCXN236 board by I2C and I3C way.
Signed-off-by: Neil Chen <cheng.chen_1@nxp.com>
What is changed?
- Replaced printk with printf in the sample
Why do we need this change?
- Running the sample with fvp just prints the below output and not
the complete logs that we expect:
`sender 0: Sending inference`
We get the expected output with CONFIG_LOG_IMMEDIATE=y but,
its not ideal. printf works without the config and plus it
looks a better fit in the current sample than printk.
This change is validate using `mps3/corstone300/fvp`.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
What is changed?
- Updated the board qualifier for MPS3 to `mps3/corstone300/fvp`
Why do we need this change?
- To validate the sample with FVP by default since QEMU doesn't
model the NPU.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
