This commit introduces a new interrupt controller driver used
for NXP's IRQ_STEER IP.
Apart from introducing the driver itself, this commit contains
the following changes:
1) Switch i.MX8MP to using the XTENSA core interrupt
controller instead of the dummy irqsteer one.
* this is required because the binding for the
irqsteer driver is no longer a dummy one
(since it's being used by the irqsteer driver).
As such, to avoid having problems, switch to
using another dummy binding.
2) Modify the irqsteer dummy binding such that it
serves the IRQ_STEER driver's needs.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
There's a ternary operator that depends on configuration-defined macro:
`CONFIG_DYNAMIC_INTERRUPTS` is not enabled by default
for any of the platforms that use PLIC,
it is possbile to set it to `=y` though.
This triggered the Coverity check to report it as dead code.
Fixes#65576.
Signed-off-by: Wojciech Sipak <wsipak@antmicro.com>
The `riscv_plic_irq_enable` & `riscv_plic_irq_disable` are very
similar, refactor them out into `plic_irq_enable_set_state`.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Introduced `CONFIG_PLIC_SHELL` to enable the build of shell
debugging command to get the hit count of each interrupt
controller's IRQ line. This is especially useful when working
with dynamically installed ISRs, which will be the case for
`plic_sw`.
Example usage:
```
uart:~$ plic stats get interrupt-controller@c000000
IRQ Hits
==================
10 177
uart:~$ plic stats get interrupt-controller@c000000
IRQ Hits
==================
10 236
uart:~$ plic stats clear interrupt-controller@c000000
Cleared stats of interrupt-controller@c000000.
uart:~$ plic stats get interrupt-controller@c000000
IRQ Hits
==================
10 90
```
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Maxim Adelman <imax@meta.com>
if-conditionals should have brackets according to Zephyr's
coding standard, and explicitly compares `edge_irq` against 0.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Previously, the PLIC's registers were accessed through uint32_t *,
so all calculated offsets were effectively multiplied by
sizeof(uint32_t). Do the same manuallly now that we have
mem_addr_t/sys_read32.
Signed-off-by: Piotr Wojnarowski <pwojnarowski@antmicro.com>
`get_claim_complete_offset` and `get_threshold_priority_offset` actually
return addresses directly. Rename them to `_addr` for consistency within
the driver. Also change their return type to `mem_addr_t`.
Signed-off-by: Piotr Wojnarowski <pwojnarowski@antmicro.com>
Use arch-specific sys IO APIs to access the memory-mapped
registers to ensure safe memory operations
fixes#62956
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Added some defines and helper functions to help with the
arithmetics so that the bit shifts and stuff do not look like
magic number.
Converted manual bit shift/set/unset to use macros provided by
Zephyr.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Most of the public APIs in `riscv_plic.h`
(except `riscv_plic_get_irq` & `riscv_plic_get_dev`) expect the
`irq` argument to be in Zephyr-encoded format, instead of the
previously `irq_from_level_2`-stripped version. The first level
IRQ is needed by `intc_plic` to differentiate between the
parent interrupt controllers, so that correct ISR offset can be
obtained using the LUT in `sw_isr_common`.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Use a config struct to store per-instance device config during
init and connect the IRQ based on the devicetree instead of
hardcoded value and instance number.
The `get_plic_dev_from_irq` is still a placeholder for now and
always return the first instance.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Some NXP S32 shim drivers are using macros defined in
soc/arm/nxp_s32/*/soc.h but not including soc.h. Those still
can be built because the header file is included indirectly
by some other header files. This is very fragile, it should
be included directly
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
At present, many of the NXP S32 shim drivers do not make use of
devicetree instance-based macros because the NXP S32 HAL relies on an
index-based approach, requiring knowledge of the peripheral instance
index during both compilation and runtime, and this index might not
align with the devicetree instance index.
The proposed solution in this patch eliminates this limitation by
determining the peripheral instance index during compilation
through macrobatics.
Note that for some peripheral instances is needed to define the
HAL macros of the peripheral base address because there are gaps
in the instances or there are SoCs with a single instance.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
To avoid complicating the initial code for supporting the SoC,
I have implemented only the bare minimum for now.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Relocate multi-level interrupts APIs out of `irq.h` into
a new file named `irq_multilevel.h` to provide cleaner
separation between typical irq & multilevel ones.
Added preprocessor versions of `irq_to_level_x` as `IRQ_TO_Lx`.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Remove the HWSEM locking around stm32_exti_disable().
The STM32 EXTI driver uses the core-local interrupt mask regsiters on
STM32H7x7 asym. dualcore MCUs. There is no need to lock the HWSEM
guarding the EXTI when accessing these registers.
Some sensor drivers toggle their interrupt mask every time the sensor
triggers the IRQ line. Locking the HWSEM fails e.g. in situations where
one coprocessor serivces the sensor and the other coprocessor sets up
its interrupts initially during bootup. This prevents the sensor driver
from locking the HWSEM and causes a kernel panic on the corresponding
CPU.
Note: The opposing stm32_exti_enable() was already correctly without
locking.
Signed-off-by: Martin Gritzan <martin.gritzan@gmail.com>
Introduce an interrupt controller for the NXP S32 WKPU peripheral
that can be integrated with GPIO to trigger interrupts through
external interrupt pad inputs.
WKPU can trigger interrupts from certain input pads that support this
function, as well as wake-up events to the power management domain. This
patch only adds WKPU functionality as an interrupt controller to extend
the number of input pads that can interrupt the core. Power management
functionalities are not supported.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Define all the register offset directly in the driver according
to the RISCV PLIC specification as they are not configurable,
see: https://github.com/riscv/riscv-plic-spec.
Updated devicetrees that has PLIC accordingly.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Removing the edge-trigger Kconfig as it is supported by default
in the RISCV PLIC specifications.
Define the edge-trigger register offset in the driver instead
of retrieving the value from devicetree as it is not something
configurable. The value 0x1080 is defined in Andes & Telink
datasheets.
Updated build_all testcase.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
NOCACHE_MEMORY depends on ARCH_HAS_NOCACHE_MEMORY_SUPPORT, so
don't try to select the symbol if not supported.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Convert DEVICE_DEFINE to DEVICE_DT_INST_DEFINE, this allows the build
system to track the device dependencies and ensure that the interrupt
controller is initialized before other devices using it.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Convert SYS_INIT to DEVICE_DT_INST_DEFINE, this allows the build system
to track the device dependencies and ensure that the interrupt
controller is initialized before other devices using it.
Adjust some DT_INST macro as well while at it.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Convert SYS_INIT to DEVICE_DT_INST_DEFINE, this allows the build system
to track the device dependencies and ensure that the interrupt
controller is initialized before other devices using it.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Convert SYS_INIT to DEVICE_DT_INST_DEFINE, this allows the build system
to track the device dependencies and ensure that the interrupt
controller is initialized before other devices using it.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Convert SYS_INIT to DEVICE_DT_INST_DEFINE, this allows the build system
to track the device dependencies and ensure that the interrupt
controller is initialized before other devices using it.
Fix an incorrectly declared compatible and adjust some DT macros as
well.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Convert SYS_INIT to DEVICE_DT_INST_DEFINE, this allows the build system
to track the device dependencies and ensure that the interrupt
controller is initialized before other devices using it.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Convert SYS_INIT to DEVICE_DT_INST_DEFINE, this allows the build system
to track the device dependencies and ensure that the interrupt
controller is initialized before other devices using it.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Convert SYS_INIT to DEVICE_DT_INST_DEFINE, this allows the build system
to track the device dependencies and ensure that the interrupt
controller is initialized before other devices using it.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Convert SYS_INIT to DEVICE_DT_INST_DEFINE, this allows the build system
to track the device dependencies and ensure that the interrupt
controller is initialized before other devices using it.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This commit follows the parent commit work.
This commit introduces the following major changes.
1. Move all directories and files in 'include/zephyr/arch/arm/aarch32'
to the 'include/zephyr/arch/arm' directory.
2. Change the path string which is influenced by the changement 1.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
Use DEVICE_DT_INST_DEFINE instead of DEVICE_DEFINE to declare the device
structure. This ensures that the device gets an ordinal and is
initialized before any device depending on it.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The old acpi implimentation is replaced with acpica interface
and updated x86 arch porting with the new interface.
Signed-off-by: Najumon B.A <najumon.ba@intel.com>
Add TI VIM (Vectored Interrupt Manager) interrupt controller support.
VIM is a TI specific custom interrupt controller for ARM cores.
In J721E soc, VIM aggregates interrupts to Cortex R5 cores.
TRM for J721e https://www.ti.com/lit/zip/spruil1
File: spruil1c.pdf
VIM: section 6.3.3.6
Signed-off-by: Prashanth S <slpp95prashanth@yahoo.com>
As per #26393, Local APIC is using Kconfig based option for
the base address. This patch adds DTS binding support in the driver,
just like its conunter part I/O APIC.
Signed-off-by: Umar Nisar <umar.nisar@intel.com>
GIC-600 and later interrupt controllers have an additional
GICR_PWRR register that controls the power up sequencing
of the redistributors. Added logic to gicv3_rdist_enable to
configure GICR_PWRR if required.
Signed-off-by: Chad Karaginides <quic_chadk@quicinc.com>
The CMSIS module glue code was part of arch/ directory. Move it to
modules/cmsis, and provide a single entry point for it: cmsis_core.h.
This entry header will include the right CMSIS header (M or A/R).
To make this change possible, CMSIS module Kconfig/CMake are declared as
external, allowing us to add a new Zephyr include directory.
All files including CMSIS have been updated.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Following #60410, the NXP S32 external interrupt controller device
initializes after the core interrupt controller. Bump the NXP S32 intc
init level to initialize after the core intc and before the GPIO
device driver.
Fixes#61218
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Some architectures such as RISC-v support more than 255 interrupts
per aggrigator. This diff adds the ability to forgo the aggrigator
pattern and use a configurable number of bits for multilevel
interruts.
Signed-off-by: Joshua Lilly <jgl@meta.com>
Refactor the ESP32 target SOCs together with
all related boards. Most braking changes includes:
- changing the CONFIG_SOC_ESP32* to refer to
the actual soc line (esp32,esp32s2,esp32s3,esp32c3)
- replacing CONFIG_SOC with the CONFIG_SOC_SERIES
- creating CONFIG_SOC_FAMILY_ESP32 to embrace all
the ESP32 across all used architectures
- introducing CONFIG_SOC_PART_NUMBER_* to
provide a SOC model config
- introducing the 'common' folder to hide all
commonly used configs and files.
- updating west.yml to reflect previous changes in hal
Signed-off-by: Marek Matej <marek.matej@espressif.com>
The intc_gicv3_its driver is currently initializing in POST_KERNEL, but
PCIe device nodes depends on it and are initialized earlier. Change the
init level to PRE_KERNEL_1 to sort that out, and also put the driver in
line with other interrupt controller drivers.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
SIUL2 may require multiple interrupt handlers instead of a single one as
currently supported for S32Z/E. This is needed to enable support on
S32K3.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Usage of 64-bit address constants from devicetree without
an UINT64_C wrapping macro results in the following warning
and the cut-off of the address value:
"warning: integer constant is so large that it is unsigned"
This change fixes such issue for PLIC, MTIMER and UART in case
they are used with some 64-bit RISC-V platforms
Signed-off-by: Alexander Razinkov <alexander.razinkov@syntacore.com>
Currently, only the presence of a GIC is reflected in the device tree,
and its version must be set separately in each SoC's Kconfig.
This patch adds separate bindings for each GIC version whose presence
in the device tree automatically enables the corresponding Kconfig symbol.
Signed-off-by: Piotr Wojnarowski <pwojnarowski@antmicro.com>
add explicit boolean type to 'if' statement controlling expression,
consolidating it with 'stm32_exti_is_pending' function return type, thus
improving code readability and maintainability, complying with required
[misra-c2012-14.4] rule which states; The controlling expression of an
if statement and the controlling expression of an iteration-statement
shall have essentially boolean type.
Found as a coding guideline violation (Rule 14.4) by static code
scanning tool.
Note: Tested on STM32L5 Nucleo-144 board (stm32l552xx).
Signed-off-by: ferar alashkar <ferar.alashkar@gmail.com>
add an unconditional break to switch-clause's default case, complying
with required [misra-c2012-16.3] rule which states; An unconditional
break statement terminate every switch-clause.
Found as a coding guideline violation (Rule 16.3) by static code
scanning tool.
Note: Tested on STM32L5 Nucleo-144 board (stm32l552xx).
Signed-off-by: ferar alashkar <ferar.alashkar@gmail.com>
1. use 'BIT' macro instead of explicit left shift operations, since
'BIT' macro implicitly adds unsigned type suffix, avoiding possible
[shiftTooManyBitsSigned] scenarios, and
2. add an explicit uint32_t cast to 'BIT' macro argument, complying with
required [misra-c2012-10.1] rule which states; operands shall not be of
an inappropriate essential type.
Found as a coding guideline violation (Rule 10.1) by static code
scanning tool.
Note: Tested on STM32L5 Nucleo-144 board (stm32l552xx).
Signed-off-by: ferar alashkar <ferar.alashkar@gmail.com>
Compiling previous code using LLVM reveals that accessing line_range
values in runtime is not clean, as the following error is generated:
"error: initializer element is not a compile-time constant"
Replace runtime method by compile time using UTIL_INC and UTIL_x2
macros.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
add explicit boolean type to 'if' statement controlling expression,
consolidating it with 'stm32_exti_callback_t' (function pointer), thus
improving code readability and maintainability, complying with required
[misra-c2012-14.4] rule which states; The controlling expression of an
if statement and the controlling expression of an iteration-statement
shall have essentially Boolean type.
Found as a coding guideline violation (Rule 14.4) by static code
scanning tool.
Note: Tested on STM32L5 Nucleo-144 board (stm32l552xx).
Signed-off-by: ferar alashkar <ferar.alashkar@gmail.com>
change for loop iterator/counter type to unsigned int, thus matching
that of struct stm32_exti_range's len member var, complying with
required [misra-c2012-10.4] rule which states; Both operands of an
operator in which the usual arithmetic conversions are performed shall
have the same essential type category.
Found as a coding guideline violation (Rule 10.4) by static code
scanning tool.
Note: Tested on STM32L5 Nucleo-144 board (stm32l552xx).
Signed-off-by: ferar alashkar <ferar.alashkar@gmail.com>
add enclosing parentheses enforcing and clarifying precedence of
operators, thus improving code readability and maintainability,
complying with *advisory* [misra-c2012-12.1] rule which states; The
precedence of operators within expressions should be made explicit.
Found as a coding guideline recommendation (Rule 12.1) by static code
scanning tool.
Note: Tested on STM32L5 Nucleo-144 board (stm32l552xx).
Signed-off-by: ferar alashkar <ferar.alashkar@gmail.com>
Clang reports 'initializer element is not a compile-time constant' when
trying to initialize structure with elements of constant array. The
compiler is wrong in this case because the elements of the array are
known at compile time, so there are no obstacles to initialize structure
using it.
The problem was fixed by removing 'range' array and using
DT_PROP_BY_IDX() to get values directly from DT.
Signed-off-by: Patryk Duda <pdk@semihalf.com>
To reduce the interrupt latency of MIWU events, the driver prepares a
dedicated callback function item list for each MIWU group in this PR. We
needn't check the MIWU table and group of the event in ISR. And the
maximum item number of each list is also limited to 8. After applying
this PR, the interrupt latency reduces to ~10us consistently.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Remove all init functions that do nothing, and provide a `NULL` to
*DEVICE*DEFINE* macros.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Introduce PINT driver, for NXP pin interrupt and pattern match engine.
The driver currently supports only the pin interrupt feature of the
PINT.
Add DTS entires for the PINT on LPC and RT devices that support this
peripheral, and remove the interrupt defintions that are PINT specific
from the GPIO module on these devices.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The init infrastructure, found in `init.h`, is currently used by:
- `SYS_INIT`: to call functions before `main`
- `DEVICE_*`: to initialize devices
They are all sorted according to an initialization level + a priority.
`SYS_INIT` calls are really orthogonal to devices, however, the required
function signature requires a `const struct device *dev` as a first
argument. The only reason for that is because the same init machinery is
used by devices, so we have something like:
```c
struct init_entry {
int (*init)(const struct device *dev);
/* only set by DEVICE_*, otherwise NULL */
const struct device *dev;
}
```
As a result, we end up with such weird/ugly pattern:
```c
static int my_init(const struct device *dev)
{
/* always NULL! add ARG_UNUSED to avoid compiler warning */
ARG_UNUSED(dev);
...
}
```
This is really a result of poor internals isolation. This patch proposes
a to make init entries more flexible so that they can accept sytem
initialization calls like this:
```c
static int my_init(void)
{
...
}
```
This is achieved using a union:
```c
union init_function {
/* for SYS_INIT, used when init_entry.dev == NULL */
int (*sys)(void);
/* for DEVICE*, used when init_entry.dev != NULL */
int (*dev)(const struct device *dev);
};
struct init_entry {
/* stores init function (either for SYS_INIT or DEVICE*)
union init_function init_fn;
/* stores device pointer for DEVICE*, NULL for SYS_INIT. Allows
* to know which union entry to call.
*/
const struct device *dev;
}
```
This solution **does not increase ROM usage**, and allows to offer clean
public APIs for both SYS_INIT and DEVICE*. Note that however, init
machinery keeps a coupling with devices.
**NOTE**: This is a breaking change! All `SYS_INIT` functions will need
to be converted to the new signature. See the script offered in the
following commit.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
init: convert SYS_INIT functions to the new signature
Conversion scripted using scripts/utils/migrate_sys_init.py.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
manifest: update projects for SYS_INIT changes
Update modules with updated SYS_INIT calls:
- hal_ti
- lvgl
- sof
- TraceRecorderSource
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: devicetree: devices: adjust test
Adjust test according to the recently introduced SYS_INIT
infrastructure.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: kernel: threads: adjust SYS_INIT call
Adjust to the new signature: int (*init_fn)(void);
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The implementation of GIC v3 ITS uses k_aligned_malloc(), which will
only work if dynamic memory is available (system heap). Tell the user
that a dynamic memory pool is required.
The amount of memory will depend on registers probed during runtime.
Signed-off-by: Rodrigo Cataldo <rodrigo.cataldo@huawei.com>
Co-authored-by: Henri Xavier <datacomos@huawei.com>
We need to ensure that the XEC GIRQs are initialized after the
XEC ECIA device. Right now we depend on the linker ordering
things correctly since everything is at INTC_INIT_PRIORITY
priority
Set the XEC GIRQs to 41 so the init priority is one more than
INTC_INIT_PRIORITY that is used by xec-ecia.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Setting the same callback with the same data as is already configured
should not cause an error.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
Unify the drivers/*/Kconfig menuconfig title strings to the format
"<class> [(acronym)] [bus] drivers".
Including both the full name of the driver class and an acronym makes
menuconfig more user friendly as some of the acronyms are less well-known
than others. It also improves Kconfig search, both via menuconfig and via
the generated Kconfig documentation.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The clock control driver requires three pieces of information:
PCR register index, bit position, and clock domain. Clock domain
was missing from DT information and MCHP macros.
Signed-off-by: Manimaran A <manimaran.a@microchip.com>
remove all #ifdef CONFIG_SOC_SERIES_STM32xx
before to add a st,stm32g0-exti compatible
added to the matching targets:
C0/G0/U5/L5/MP1:
Signed-off-by: Marc Desvaux <marc.desvaux-ext@st.com>
Fix IDU mask setup:
* fix GENMASK usage to avoid generating mask to one extra cpu (which
doesn't exist in configuration)
* use arch_num_cpus() instead of CONFIG_MP_NUM_CPUS to allow having
some cpu's disabled (with detection in runtime)
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Currently we setup irq trigger type (pulse or level) in IDU
before we Mask (disable) IRQ line.
The IDU is disabled at this moment, however we still may
accidentally generate interrupt by trigger setup.
To avoid that let's mask (disable) IRQ before trigger type setup.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
This change takes advantage of line information coming from new properties
to simplify exti_irq_table definition and isr routing related code.
All __stm32_exti_isr_x routing functions are removed and instead,
stm32_exti_isr is now taking a exti_range structure which provides,
for each irq, start line and range length.
This argument is provided by IRQ_CONNECT macro instead of previous
dev info (which is constant and doesn't need to be provided as argument).
line_range_x variables are generated at driver init thanks to a
mix of dt magic and runtime implementation:
DT_FOREACH_PROP_ELEM iterates over each irq line (counted as
interrupt-names property) call a macro which instantiates populated
line_range_x variables, and calls IRQ_CONNECT for each IRQ.
Additionally, at each iteration stm32_fill_irq_table() is called to
fill exti_irq_table.
Since not required anymore, Kconfig symbols EXTI_STM32_EXTIX_Y_IRQ_PRI
are removed. IRQ prio is now supposed to be configured in device tree.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
zephyr kernel header file should be included otherwise gcc will report
the warning: implicit declaration of function 'k_aligned_alloc' and
the return value of 'k_aligned_alloc' will be treated as an int type,
which will cause an error on the 64 bits platform.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
In Infineon XMC4XXX SoCs, gpio interrupts are triggered via an
Event Request Unit (ERU) module. A subset of the gpios are
connected to the ERU. The ERU monitors edge triggers and creates
a SR.
This driver configures the ERU for a target port/pin combination
for rising/falling edge events. Note that the ERU module does
not generate SR based on the gpio level. Internally the ERU
tracks the *status* of an event. The status is set on a positive
edge and unset on a negative edge (or vice-versa depending on
the configuration). The value of the status is used to implement
a level triggered interrupt; The ISR checks the status flag and
calls the callback function if the status is set.
The ERU configurations for supported port/pin combinations are
stored in a devicetree file dts/arm/infineon/xmc4xxx_x_x-intc.dtsi.
The configurations are stored in the opaque array
uint16 port_line_mapping[].
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Config NOCACHE_MEMORY depend on ARCH_HAS_NOCACHE_MEMORY_SUPPORT. Enable
ARCH_HAS_NOCACHE_MEMORY_SUPPORT for Cortex-R52 to run NXP S32Z/E with
nocache attibute.
Enable nocache in each driver use it.
Signed-off-by: Duong Vu Nam <duong.vunam@nxp.com>
Control shared interrupts enabling/disabling via IDU.
With that we can easily enable and disable them for all cores
in one place.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Add initial support for the NXP S32Z27 SIUL2 External
Interrupt Controller. Each SIUL2 node has a child node
will act as an interrupt-controller that processes external
interrupt signals.
This driver is required to manage GPIO interrupts.
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
GICR_TYPER is a 64 bit register. On AArch32 when one uses sys_read64(),
this results in ldrd instruction. When Zephyr runs as a VM, 'LDRD'
instruction on an emulated MMIO region gets trapped to the hypervisor as
data abort.
Refer the following paragraph from ARM DDI 0487G.b ID072021 :-
Section - "ISS encoding for an exception from a Data Abort",
"For other faults reported in ESR_EL2, ISV is 0 except for the following
stage 2 aborts:
AArch32 instructions where the instruction:
— Is an LDR, LDA, LDRT, LDRSH, LDRSHT, LDRH, LDAH, LDRHT, LDRSB, LDRSBT,
LDRB, LDAB, LDRBT, STR, STL, STRT, STRH, STLH, STRHT, STRB, STLB, or STRBT
instruction."
As 'LDRD' is not in the list, so ISV==0. This implies that Arm could not
decode the instruction for the hypervisor (in EL2) to execute it.
Thus, we have abstracted this read into arm_gic_get_typer().
For AArch64, we use sys_read64() as before.
For AArch32, we use sys_read32() twice to read the lower and upper 32 bits
of GICR_TYPER.
Thus, we ensure that when the access is trapped for AArch32, Arm generates
a valid ISS so that hypervisor can execute it.
Signed-off-by: Ayan Kumar Halder <ayankuma@amd.com>
Move runtime checks to use arch_num_cpus() and build checks
to use CONFIG_MP_MAX_NUM_CPUS. This is to allow runtime
determination of the number of CPUs in the future.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Replace usage of CONFIG_MP_NUM_CPUS with CONFIG_MP_MAX_NUM_CPUS for
init and declaration as we phase out CONFIG_MP_NUM_CPUS usage.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Executing code out of RAM on IT8xxx2 requires that the relevant
addresses be mapped onto the CPU's instruction memory bus, referred to
by ITE documentation as Instruction Local Memory (ILM). ILM mappings
configure blocks of RAM to be used for accesses to chosen addresses when
performing instruction fetch, instead of the memory that would normally
be accessed at that address.
ILM must be used for some chip features (particularly Flash
self-programming, to execute from RAM while writing to Flash), and has
historically been configured in the Flash driver. The RAM for that was
hard-coded as a single 4k block in the linker script. Configuring ILM
in the flash driver is confusing because it is used by other SoC code as
well, currently in code that cannot depend on the Flash being functional
or in hand-selected functions that seem performance-critical.
This change moves ILM configuration to a new driver and dynamically
allocates RAM to ILM in the linker script, allowing software use of the
entire 64k RAM depending on configuration. This makes ILM configuration
more discoverable and makes it much easier to correctly support the
CODE_DATA_RELOCATION feature on this SoC.
Signed-off-by: Peter Marheine <pmarheine@chromium.org>
Change for loops of the form:
for (i = 0; i < CONFIG_MP_NUM_CPUS; i++)
...
to
unsigned int num_cpus = arch_num_cpus();
for (i = 0; i < num_cpus; i++)
...
We do the call outside of the for loop so that it only happens once,
rather than on every iteration.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Change automated searching for files using "IRQ_CONNECT()" API not
including <zephyr/irq.h>.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fix the scope of some variables in various STM32 drivers including:
- SDMMC
- DMA
- OSPI/QSPI Flash
- Interrupt controller
The variables are set static instead of global and const if appropriate.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Cleanup soc.h and move interrupt defines into own headers. Rename some
of the defines for ACE to have a unified namespace.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The DW register block was duplicated into the ACE header while we had
the same thing in the driver. Move everything to the driver as the first
step with further improvements planned on top of this.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some files were using arch interfaces (e.g. arch_curr_cpu) without
including necessary headers.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
With the incoming removal of kernel.h/types.h from init.h, lots of files
start to show compile errors because they relied on indirect
definitions, including errno.h.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The sys* ops like sys_clear_bit are indirectly included via arch CPU
header. Other stuff like find_msb_set end up included via this header as
well.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Zephyr encodes multi-level interrupts in a certain way, and
the driver is not utilizing the encoding correctly. So fix
it.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Introduce a function to do the matching job. Add the config for some
platforms to match the mpdir with aff0 only.
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
Some platforms only use aff0 to match mpdir and GICR.aff. Introduce
GIC_V3_RDIST_MATCHING_AFF0_ONLY to set the matching method only using
aff0. With this config enabled, the matching function will find the
target redistributor by comparing the aff0 only.
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
The cast for the offset variable will make incorrect register
access when it is over 0x80. Change the char cast to unsigned
char to fix it.
Fixes#49803.
Signed-off-by: Enjia Mai <enjia.mai@intel.com>
In old way, gic_rdists[cpu] is calculated via MPIDR_TO_CORE(), but in
real hardware, MPIDR_TO_CORE() isn't a value increment from 0 one by
one, and that will lead gic_rdists[cpu] to point to a wrong address.
GICv3 provides the register GICR_TYPER[1] and it has a field named
Affinity_Value. This field can help to determine where gic_rdists[cpu]
should point.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Updates ESP32 to use hal interrupt funcions provided by 4.4.1
release. Removed redefinition of interrupt FLAGS.
This also includes interrupt definitions for ESP32C3
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Update intc drivers to use DT_HAS_<compat>_ENABLED Kconfig symbol
to expose the driver and enable it by default based on devicetree.
We remove 'depend on' Kconfig for symbols that would be implied by
the devicetree node existing.
Signed-off-by: Kumar Gala <galak@kernel.org>
Pull more function into ram code section to effectively improve
access speed and performance.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Many device pointers are initialized at compile and never changed. This
means that the device pointer can be constified (immutable).
Automated using:
```
perl -i -pe 's/const struct device \*(?!const)(.*)= DEVICE/const struct
device *const $1= DEVICE/g' **/*.c
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Remove redundant definitions by defining at the top before variable is
used. Also constify device array.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Initialize the vtd device at compile time. Also removed unnecessary
macro hackery. As a result, vtd pointer can be constified.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
For Arm Cortex-family processors that only support single
sercurity state, (GICD_CTRL.ARE is set to '1'), so need to
set SPI's affinity for the PE which it is enabled.
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
This platform does not use RISC-V machine timer, however, the interrupt
controller had references to its IRQ. Remove them.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
MISRA C:2012 Rule 14.4 (The controlling expression of an if statement
and the controlling expression of an iteration-statement shall have
essentially Boolean type.)
Use `do { ... } while (false)' instead of `do { ... } while (0)'.
Use comparisons with zero instead of implicitly testing integers.
The commit is a subset of the original auditable-branch commit:
5d02614e34a86b549c7707d3d9f0984bc3a5f22a
Signed-off-by: Simon Hein <SHein@baumer.com>
Intel ADSP CAVS is now a proper series with all CAVS SoCs running under
it. This will give us to Intel ADSP series:
- CAVS
- ACE v1.x
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
irq_lock() returns an unsigned integer key.
Generated by spatch using semantic patch
scripts/coccinelle/irq_lock.cocci
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Introduce a new RISCV_HAS_CLIC symbol for platforms using CLIC,
reorganize the Kconfigs and make the Nuclei ECLIC depending on the new
symbol.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Following zephyr's style guideline, all if statements, including single
line statements shall have braces.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The AIVECT (All Interrupt Vector Register) register provides us a quick
way to determine SOC interrupt number. But sometimes we get interrupt
number 0 from the register and caused assertion of unhandled interrupt.
To avoid the assertion, we look for all ISRs (Interrupt Status Register)
and IERs (Interrupt Enable Register) to find the highest priority pending
interrupt and return it to caller.
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
Stop relying on <soc.h> to access HAL APIs. Use generic, per-API headers
instead. Note that <soc.h> has been left as is for now, since ARM MPU
relies on a fragile chain of includes/type definitions.
This change should improve compilation efficiency, as we no longer pull
APIs that are not needed. A similar approach is followed by STM32
drivers.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Files including <zephyr/kernel.h> do not have to include
<zephyr/zephyr.h>, a shim to <zephyr/kernel.h>.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Assembler files were not migrated with the new <zephyr/...> prefix.
Note that the conversion has been scripted, refer to #45388 for more
details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In order to bring consistency in-tree, migrate all drivers to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
We put disabling SOC interrupt enable register (IER) sequence in
between disable and enable core's global interrupt to prevent race
condition.
After core interrupt enable instruction has been executed, the new
configuration of IER has not yet been fully processed due to
asynchronization between core and SOC's source clock.
If SOC interrupt is fired under the above condition, we will get
IRQ number 0 in ISR due to IER disabling taken effect.
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
Current code uses per-core register to check interrupt status and
dispatch handlers. However to disable/enable the interrupt, core
zero register is always used.
While the handlers in _sw_isr_table are common for all cores,
the status bits should still be handled separate for each core.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
The function in its current form is confusing because unlike other
similarly named functions (dt_nodelabel_has_prop(), dt_node_has_prop())
or devicetree macros (DT_NODE_HAS_COMPAT(), DT_NODE_HAS_PROP()), this
function takes into account the status of the checked node and returns
"y" only when the node is enabled.
This commit redefines dt_nodelabel_has_compat() so that it no longer
checks the node status, and for cases where the previous functionality
is needed, a new function named dt_nodelabel_enabled_with_compat()
is introduced as a replacement.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Don't leave idle state if soc isn't waked-up by an interrupt.
(We change to check interrupt controller register)
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
Add get_msi_addr() callback to ITS API to retrieve the GITS_TRANSLATER
physical address to be set in the MSI message address field.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
