- Remove duplicated conf/.overlay configuration for
mimmxrt1170_evk A and B revisions that have the same content.
- No change if .conf/.overlay have different content.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Implement support for scatter-gather DMA transfers in the siwx917 driver.
This enhancement allows the driver to handle multiple non-contiguous memory
buffers in a single DMA transaction
Signed-off-by: Sai Santhosh Malae <Santhosh.Malae@silabs.com>
1. Corrected the burst length processing to be handled in bytes
for the siwx917 DMA drivers.
2. Removed overlay and configuration files associated with the
chan_blen_transfer test application. The chan_blen_transfer
test application attempted to use 8 and 16 byte bursts, which
are not supported by the siwx91x UDMA.
Signed-off-by: Sai Santhosh Malae <Santhosh.Malae@silabs.com>
Add ULP Coprocessor board support for C6.
This requires a change in the board qualifier depending on the build
target.
Update esp32c6 overlay and configuration files to the proper name.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
Add some overlay files for the silabs xg29_rb4412a board to enable tests
on the board. Also add the platform to some testcase.yaml files.
Signed-off-by: Martin Hoff <martin.hoff@silabs.com>
Pinoroni Pico Plus2 is an RP2350B based board that has
more rich I/O, RAM, and Flash than the original Raspberry Pi Pico2.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Enable DMA test for MAX32666FTHR board for tests chan_blen_transfer and
loop transfer
Signed-off-by: Mert Ekren <mert.ekren@analog.com>
Signed-off-by: Yasin Ustuner <Yasin.Ustuner@analog.com>
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Switches the default revision of mimxrt1170_evk from A to B.
Customers can only purchase MIMXRT1170-EVKB.
Revision "A" is obsolete and unavailable.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
The current tests should fail because the DMA controller now is disabled
by default in the devicetree. This add specific configuration to enable
the DMA controller and decalre the amount of bytes to be transfered to
allow small devices not fail in the link phase.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Increase test coverage for Raspberry Pi's SoCs. Use the `socs` folder
rather than `boards` to enable these tests to run on any boards with the
same SoCs.
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
Add initial support for the RP2350's DMA peripheral, allow tests
under drivers/dma/loop_transfer to run on on the Raspberry Pi Pico 2,
and update the board's documentation.
Signed-off-by: Manuel Aebischer <manuel.aebischer@belden.com>
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
Convert qspi and hyperflash to variants instead of revisions by popular
demand.
And convert evkb into a revision instead of a different board.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Added sltb010a,slwrb4180a,xg24_dk2601b and xg27_dk2602a boards files
to run chan_blen_transfer, loop_transfer and scatter_gather tests.
Signed-off-by: Martin Hoff <martin.hoff@silabs.com>
Increase test coverage for Raspberry Pi's RP2040. Use the `socs` folder
rather than `boards` to enable these tests to run on any boards with the
same SoCs.
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
Add devicetree node for code RAM, code RAM can be accessed
over AIXM bus or AXIF bus. Code access via AXIF interface
provides the best optimal performance
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
Enable dma boards/test for S32Z270.
The non-cacheable memory used for DMA tests (chan_blen_transfer and
loop_transfer) is split from the system SRAM.
Signed-off-by: Ha Duong Quang <ha.duongquang@nxp.com>
