RTT backend can only be called from thread context and immediate
logging might lead to interrupt context use. Previously this limitation
was implied in different way and commit (c88a9ef27) got reverted.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
This creates a websocket based shell backend that is used to
implement a websocket console that can be connected using a browser.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This adds a kconfig option to force
tx blocking on serial. This way only rx
will use the interrupt.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Do not depend on init level but start the socket service
already in net core init because DNS init code depends on
socket service API to be ready to serve. And we call DNS
init at the net core init.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add a new shell backend implemented over a shared memory window
on the Intel audio DSPs. The implementation uses the Zephyr winstream
to manage the data streaming.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Improve the default serial backend init level.
The documentation says to be bigger than the init level of the serial
device used. Since serial devices default to the kernel device init
level (50) then put this to default of application level drivers (90).
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
If host is not reading RTT data (because there is no PC connection
or RTT reading application is not running on the host), thread will
stuck continuously trying to write to RTT. All threads with equal or
lower priority are blocked then. Adding detection of that case and
if host is not reading data for configurable period then data is
dropped until host accepts new data.
Similar solution is using in RTT logging backend.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Rework TELNET shell backend to use socket API for communication and
socket service library for socket monitoring.
Additionally, rework the TX part so that non-blocking TX is used when
sending from the system work queue. In case transfer is not possible at
the moment, the TX work is rescheduled instead of blocking the system
work queue.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Introduce a backend for the Shell subsystem using a RPMsg endpoint.
This is useful for tooling & testing a remote processor from linux.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This patch modifies the way SHELL_BACKEND_SERIAL_API_ASYNC is selected.
The current logic causes conflicts (no console output) when the user tries
to use one of the UARTs in async mode, by setting CONFIG_SHELL_ASYNC_API,
while using Shell with a different UART (typically the Console's one).
Signed-off-by: Abderrahmane Jarmouni <abderrahmane.jarmouni-ext@st.com>
When UART asynchronous API support was added to shell it was set up
to be the default one and was turning on asynchronous API if it was
supported. However, it may lead to complation failures if device
requires additional setup for asynchronous UART (e.g DMA in device
tree). Becuase of that, it is reverted back to use interrupt driven
API and use asynchronous API if it is already enabled in the
application.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Rework UART backend to clearly use single instance approach as
before it was a bit messy with some parts of implementation indicating
multi-instance approach and some single instance. Backend has been
around for years and multi-instance requirement never came.
Added support for UART asynchronous API which is more efficient
in terms of power consumption and performance. Asynchronous API
support is using uart_async_rx helper module for handling data
received asynchronously.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Adding support for echo option if telnet commands are supported. This is
useful when the telnet client is in character mode. It allows to use the
arrow keys, ctrl-c and more. Something to keep in mind is that when
character mode is turned on by the client, network traffic is
considerably increased as each typed character is sent over the wire.
Note: echo mode is only supported if SHELL_TELNET_SUPPORT_COMMAND is
enabled.
Signed-off-by: David Corbeil <david.corbeil@dynon.com>
HAS_DTS has become a redundant option. All Zephyr architectures now
select this option, meaning devicetree has become a de-facto
requirement. In fact, if any board does not provide a devicetree
source, the build system uses an empty stub, meaning the devicetree
machinery always runs.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Set correct SHELL_BACKEND_SERIAL_INIT_PRIORITY if ACPI is enabled.
Otherwise when enabling SHELL using menuconfig, etc serial backend is
not working.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The RTT backend of the shell does not support several of the more
advanced terminal features. This commit proposes to inactivate these
features by default when RTT is selected as shell backend.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
This new configuration option, SHELL_BACKEND_RTT_BUFFER, allows selecting
an alternative buffer for the Shell's RTT backend. By default buffer 0 is
used, which conflicts with the default logging subsystem RTT backend
buffer.
This option is the counterpart to the logger's LOG_BACKEND_RTT_BUFFER.
Signed-off-by: Maurits Fassaert <maurits.fassaert@sensorfy.ai>
Fail compilation when incorrect configuration is detected, i.e. when
SHELL_BACKEND_SERIAL_CHECK_DTR is set but UART_LINE_CTRL is not set.
Use periodic timer to wait for DTR instead of waiting in uart callback
to prevent blocking caller workqueue and/or sleeping in ISR.
DTR check was only ever supported with interrupt driven backend so add
appropriate depends on to Kconfig.
Fixes: e9f238889b ("shell: uart: Add waiting on DTR signal before
sending data")
Fixes: #47120Fixes: #54705
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
This change fixes code to match the description in
https://github.com/zephyrproject-rtos/zephyr/pull/55061
(see commit 9ecef4b).
This preserves the previous default behaviour of the
shell dummy backend.
Signed-off-by: Nick Ward <nix.ward@gmail.com>
Dummy shell was always started with log backend enabled with filter
statically set to INFO level.
AFAIK no use of such log backend can be made, thus causing waste of
resources.
The new changes keep INFO as the default filter level. In order to
disable log backend to be attached to the Dummy shell,
CONFIG_SHELL_DUMMY_INIT_LOG_LEVEL_NONE has to be set.
Signed-off-by: Marco Argiolas <marco.argiolas@ftpsolutions.com.au>
This fixes an issue whereby when USB CDC is used for receiving MCUmgr
commands, the commands are corrupted, invalid or messed up by
increasing the receive buffer size so that it can handle at least 1
full MCUmgr fragment.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
188d2dfcca introduced a change where log message queue again
become configurable through Kconfig instead of being fixed in
the code. However, it updated only the configuration of an UART
backend. This commit updates other backends as well. Including
dummy backend which has fixed in the code value.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
If LOG_PRINTK is used then the buffer size needs to be larger to
account for the additional header/footer output from the shell.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Use LOG_MESSAGE_QUEUE_SIZE config instead of hardcoded value.
LOG_MESSAGE_QUEUE_SIZE default value has been changed to 512, so
it is now matching to the hardcoded value.
Signed-off-by: Wojciech Slenska <wsl@trackunit.com>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Since there are no more users and dependencies of
Kconfig option USB_UART_CONSOLE in the tree,
remove the remains and the option USB_UART_CONSOLE.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This change organizes the file structure for the shell.
Files implementing backends are moved to a separate folder.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
