Disable automatic LFCLK selection for GRTC during driver initialization.
For Zephyr applications it is selected by `sys_clock_driver_init()`
depending on configuration and DTS.
Signed-off-by: Adam Kondraciuk <adam.kondraciuk@nordicsemi.no>
Add missing entry for DAI_NXP_MICFIL, which was accidentally removed
during the transition to SDK-NG.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
The new SDK-NG is missing some EDMA-related headers/drivers because of
which the 'dma_nxp_edma' driver no longer compiles with it. Mark the new
SDK as unsupported for this platform until this is fixed.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
This uses the network packet as is without the need for a copy all the
way till the packet is handed over to RPU.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Increase stack size of supplicant thread to fix crash seen during
enterprise mode connection. Increase heap requirement of hostap
to handle TLS processing failures.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Allow enabling MBEDTLS_RSA_C without key exchange enabled.
This allows to use RSA without enabling x509 support too.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds Kconfig options that allows users to select
- MBEDTLS_PLATFORM_NO_STD_FUNCTIONS
- MBEDTLS_PLATFORM_SNPRINTF_ALT
allowing Mbed TLS to use alternative definitions of STD functions.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
If CONFIG_TFM_BL1 config has been enabled
bl2_signed.bin/hex image will be be generated during build tf-m
these binaries shall be used while generating tfm_merged.hex
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Define BL1 and sign key for BL2 configs and pass them to the TF-M
This will allow to trigger BL1 over zephyr and specify BL2 sign key
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Since there's now a single Kconfig and header file for Mbed TLS it makes
more sense to name them:
- Kconfig.mbedtls (instead of Kconfig.tls-generic)
- config-mbedtls.h (instead config-tls-generic.h)
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
These headers are basically a copy of those found in the official
Mbed TLS repo in the "configs" folder. However these are unmaintaned
(i.e. not updated when Mbed TLS is bumped to a new version) and
also unused in Zephyr. Therefore there's no benefit in keeping
them around.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
First commit to add support for Renesas RA i2c sci-b driver
Signed-off-by: Khoa Tran <khoa.tran.yj@bp.renesas.com>
Signed-off-by: Thao Luong <thao.luong.uw@renesas.com>
The interface workq thread and supplicant handler thread
did not had names set to them. Set the names so that it is
easier to find them from "kernel thread stacks" list.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
It is defined as spis120 rather than spi120,
because spi120 is already used for SPIM120 hardware instance,
but their base address is different.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
TLS_CREDENTIAL_SERVER_CERTIFICATE credential type is misleading, as in
fact it just represents a public certificate, it does not matter if the
certificate belongs to a server or a client. And actually, it was
already used in-tree for clients as well, for example in LwM2M.
Therefore rename the credential type to a more generic
TLS_CREDENTIAL_PUBLIC_CERTIFICATE and deprecate the old one.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The TOOLCHAIN_DISABLE_WARNING/TOOLCHAIN_ENABLE_WARNING macros are easier
to read and compiler agnostic.
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
Added configuration for new audio PLL service.
Pull in new service implementation in new hal nordic.
Signed-off-by: Łukasz Stępnicki <lukasz.stepnicki@nordicsemi.no>
Added Kconfig options to allow use of TWIM frequency
workaround in NRFX for nRF52 and nRF53.
Signed-off-by: Michał Stasiak <michal.stasiak@nordicsemi.no>
This is to fix the below compiler warning from TF-M builds
that don't use the Ethos-U driver.
```
CMake Warning:
Manually-specified variables were not used by the project:
ETHOS_DRIVER_PATH
```
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
Add a Kconfig option to match the Mbed TLS define
instead of defining it based on CONFIG_SECURE_STORAGE.
This gives more flexibility regarding the potential re-definition of the
CONFIG_MBEDTLS_PSA_CRYPTO_STORAGE_C Kconfig option.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Add interrupt controller driver support for RZ/N2L
Signed-off-by: Quang Le <quang.le.eb@bp.renesas.com>
Signed-off-by: Nhut Nguyen <nhut.nguyen.kc@renesas.com>
Add serial driver support for RZ/N2L
Signed-off-by: Hoang Nguyen <hoang.nguyen.jx@bp.renesas.com>
Signed-off-by: Nhut Nguyen <nhut.nguyen.kc@renesas.com>
Add DMA driver support for Renesas RZ/G3S
Signed-off-by: Tien Nguyen <tien.nguyen.zg@renesas.com>
Signed-off-by: Nhut Nguyen <nhut.nguyen.kc@renesas.com>
-Mbed TLS has come up with its own naming-convention with regards
to certain Mbed TLS configurations for TLS/DTLS and X.509. This
commit fixes a couple of them by depending on MBEDTLS_BUILTIN
which is set when Kconfig.tls-generic is used
1. Make MBEDTLS_PEM_CERTIFICATE_FORMAT depend on MBEDTLS_BUILTIN
The proper name for this functionaity is MBEDTL_PEM_PARSE_C and
MBEDTLS_PEM_WRITE_C
2. Make MBEDTLS_SERVER_NAME_INDICATION depend on MBEDTLS_BUILTIN
The proper name for this is MBEDTLS_SSL_SERVER_NAME_INDICATION
Signed-off-by: Frank Audun Kvamtrø <frank.kvamtro@nordicsemi.no>
-PSA_WANT_ALG_CMAC must be set for PSA_WANT_ALG_PBKDF2_AES_CMAC_PRF_128
to be valid. This commit fixes this mismatch for hostap
Signed-off-by: Frank Audun Kvamtrø <frank.kvamtro@nordicsemi.no>
MDK 8.70.0 introduced following changes in the device naming:
- renamed nRF54L20 Eng A to nRF54LM20A Eng A
- renamed nRF54L09 Eng A to nRF54LV10A Eng A
Actual SoC renaming will happen in followup PR.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
As of today, nrfx components are selectable depending if devicetree has
a certain compatible or not, and in case of IP that can operate in
multiple modes, nodelabel+compatible. An example of the later is:
```
config NRFX_SPI0
bool "SPI0 driver instance"
depends on $(dt_nodelabel_has_compat,spi0,$(DT_COMPAT_NORDIC_NRF_SPI))
select NRFX_SPI
config NRFX_SPIM0
bool "SPIM0 driver instance"
depends on $(dt_nodelabel_has_compat,spi0,$(DT_COMPAT_NORDIC_NRF_SPIM))
select NRFX_SPIM
config NRFX_SPIS0
bool "SPIS0 driver instance"
depends on $(dt_nodelabel_has_compat,spi0,$(DT_COMPAT_NORDIC_NRF_SPIS))
select NRFX_SPIS
```
These symbols are later selected by e.g. SPI driver if `spi0` node is
enabled. While this works in the Zephyr context, it can be a problem in
applications using nrfx directly in the application layer, unless they
tweak devicetree. For example, if devicetree `spi0` node defaults to
`compatible = "nordic,nrf-spim"`, NRFX_SPI0 or NRFX_SPIS0 won't be
selectable, but an application using nrfx directly doesn't really care
about what is defined in devicetree as it is effectively bypassing it.
It just wants to select e.g. `CONFIG_NRFX_SPI0=y` and forget about the
rest.
This patch fixes this problem by just checking for the existence of
certain nodelabels.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Added additional analog channels for ADC and COMP/LPCOMP and new pin
functionality mapping for TDM.
Signed-off-by: Karsten Koenig <karsten.koenig@nordicsemi.no>
Remove `select FILE_SYSTEM` from `WIFI_NM_WPA_SUPPLICANT`, originally
added in 3fc932c5. The selection is not required by any tests, and does
not appear to be used by any code in the module.
Signed-off-by: Jordan Yates <jordan@embeint.com>
CMSIS modules dsp and nn sets the optimization flag -Ofast for their
libraries. I've now made a new compiler property optimization_fast to
avoid using ifdefs in the cmsis CMakeLists.txt files.
I've update GCC and arcmwdt (not sure if arcmwdt supports -Ofast)
Signed-off-by: Lars-Ove Karlsson <lars-ove.karlsson@iar.com>
A PSA crypto operation object can be initialized in multiple
ways according to the documentation. For example,
1. Using a dedicated psa_xxx_operation_init() function that
returns an initialized object.
2. Using memset() to zero out the operation object.
For some PSA crypto driver implementations, using the first
method causes an excessive stack usage if the operation
object is large and psa_xxx_operation_init() is not inlined.
Instead, it is better to stick to memset() for this purpose.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
To ensure that the accesses to the radio peripheral are done with
predictable timings, the constant latency must be enabled.
The constant latency mode is enabled alongside the HFXO.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Added option to retry message send over ipc when for example
there is -ENOMEM error (shared memory buffer full).
Number of max retries and delay between them are Kconfigs.
Fixed nrfs error reporting when sending directly over
ipc service, status was not correct when negative value
was returned from ipc service send function.
Signed-off-by: Łukasz Stępnicki <lukasz.stepnicki@nordicsemi.no>
Added CONFIG_AMBIQ_COMPONENT_USE_BT and CONFIG_SOC_AMBIQ_BT_SUPPORTED
to fix empty zephyr_library() warning when BLE is not needed for compile.
Added CMake message if BT related Ambiq specific Kconfig is overriden for
not supported SoC.
Signed-off-by: Swift Tian <swift.tian@ambiq.com>
With introduction of OSAL wrapper for memory allocation, usage of
zephyr's native malloc calls need to be removed. When NRF70 driver
is not enabled, OSAL needs to be built explicitly.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Create dedicated memory pools for Wi-Fi management and
data operations (defaults: 20KB for management and 130KB for data).
Setting Data pool to 110KB for non-Nordic SOCs to resolve
RAM overflows seen in twister runs.
Remove the `HEAP_MEM_POOL_ADD_SIZE_NRF70` hint since we are
creating separate heaps for driver and not allocating from
system heap.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Drop the override conditions to ADC_MCUX_12B1MSPS_SAR for imxrt, the
current one causes the driver to be built when it does not have to and
are not needed anyway, and drop the HAS_MCUX_12B1MSPS_SAR option
entirely as it's not needed anymore.
Tested with:
west build -p -b teensy40 tests/lib/devicetree/api_ext
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Enable MBEDTLS_SHA384 support to use of RSA3K + Suite-B, that
is required by WPA3-Enterprise.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
The segger cmake linker script is out of date compared to
segger_rtt.ld. This is causing linker failures with IAR
when segger is enabled (on nrf hardware for example).
Signed-off-by: Carl Eriksson Skogh <carl.erikssonskogh@gmail.com>
Deprecate NRFS_LOCAL_DOMAIN_DVFS_SCALE_DOWN_AFTER_INIT option for
scaling down CPU frequency during dvfs handler initialization.
Clock control API is managing access to DVFS and DVFS should not
be controlled bypassing this API. Deprecated feature will be added in
the clock control.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
We need to make sure that within Zephyr different users of the PSA APIs
don't interfere with each other because of using the same numerical IDs
for persistent assets.
This takes care of the PSA key IDs when using persistent keys through
the PSA Crypto API.
See the comments in `<zephyr/psa/key_ids.h>` for more information.
This removes the recently-introduced Kconfig options that allowed changing
the base IDs subsystems were using for their persistent keys.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Pull latest revision of the uoscore-uedhoc module and align
corresponding CMake file with the changes.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Honor Kconfig option `BT_CTLR_TX_PWR_ANTENNA` for limiting the maximum TX
power. The default value for this option is 0 dBm, which means that after
this change the actual TX power is likely lower than before, unless
increased by this option.
Signed-off-by: Kalle Kietäväinen <kalle.kietavainen@silabs.com>
Introduce two new kconfig options in order
to be able to define custom named fatfs
mount points. If activated replace the static
FF_VOLUME_STRS approach with the runtime
generated VolumeStr array containing those
mount points.
Signed-off-by: Carlo Kirchmeier <carlo.kirchmeier@zuehlke.com>
Add Clock Control driver support for Renesas RZ/G3S
Signed-off-by: Tien Nguyen <tien.nguyen.zg@renesas.com>
Signed-off-by: Nhut Nguyen <nhut.nguyen.kc@renesas.com>
In case interface is UP, the interface is added to WPA supplicant in the
iface_wq itself and the max stack size is 4264, so, increase the stack
size of the iface_wq.
If the interface is added via net_mgmt thread then it works fine.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Update Cmake to include hal EMDRV header
It also adds dmadrv source when CONFIG_SOC_GECKO_LDMA is selected
Signed-off-by: Martin Hoff <martin.hoff@silabs.com>
This driver allow to use Zephyr native IP stack or the IP stack provided
by HAL / WiseConnect.
The WiseConnect implementation may take advantage of the specific
features provided by the 917 (power consumption, speed,
validation...).
Some notable features are not available with this interface:
- It seems Zephyr does not provide API to offload multicast membership
management. User should be to directly call WiseConnect APIs
- Support for ICMP frames is difficult. Note that WiseConnect
automatically answer to ping request. It is just not possible to
send ping requests and receive ping responses.
- Zephyr and WiseConnect both support TLS offloading. However this
patch does not implement it.
- Reentrancy in the WiseConnect side is uncertain.
This implementation has been tested with samples/net/wifi/ (which relies
on subsys/net/lib/shell).
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Driver was tested with a custom application which enabled the BT_SHELL.
Basic functionalities were verified:
- Scanning
- Advertising
- Connecting
Configuration needed for the test:
- CONFIG_BT=y
- CONFIG_BT_PERIPHERAL=y
- CONFIG_BT_CENTRAL=y
- CONFIG_BT_SHELL=y
- CONFIG_SHELL=y
Co-authored-by: Tibor Laczko <tibor.laczko@silabs.com>
Signed-off-by: Tibor Laczko <tibor.laczko@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Network Processor (NWP) is used to run WiFi, Bluetooth and Flash
drivers.
Co-authored-by: Tibor Laczko <tibor.laczko@silabs.com>
Signed-off-by: Tibor Laczko <tibor.laczko@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Implement DMA driver for siwx917 using UDMA peripheral. For now,
Scatter/Gather DMA is not yet supported.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Support for random number generator is required for most of the
cryptographic operations, including support for WiFi and TLS.
This driver has been tested with tests/drivers/entropy:
*** Booting Zephyr OS build v3.7.0-4339-g1ec5ce05f9f8 ***
Running TESTSUITE entropy_api
===================================================================
START - test_entropy_get_entropy
random device is 0x8217298, name is rng@45090000
0x93
0x3e
0xf1
0x68
0xd4
0x22
0xbf
0x4d
0xad
PASS - test_entropy_get_entropy in 0.012 seconds
===================================================================
TESTSUITE entropy_api succeeded
------ TESTSUITE SUMMARY START ------
SUITE PASS - 100.00% [entropy_api]: pass = 1, fail = 0, skip = 0 ...
- PASS - [entropy_api.test_entropy_get_entropy] duration = 0.01 ...
------ TESTSUITE SUMMARY END ------
===================================================================
RunID: d1547c805699201af769cb01331efcce
PROJECT EXECUTION SUCCESSFUL
Co-authored-by: Tibor Laczko <tibor.laczko@silabs.com>
Signed-off-by: Tibor Laczko <tibor.laczko@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Added new parameter "A" in wifi connect command to support
CA certificate used or CA certificate skipped for
EAP-TTLS-MSCHAPV2 and EAP-PEAP-MSCHAPV2.
Signed-off-by: Qingling Wu <qingling.wu@nxp.com>
Due to internal dependencies on other modules init priority
the 802.15.4 priority level must be increased. Former init
priority caused the module to be initialied before those
it depends on, so that lead to hard faults.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Adds a new Kconfig for selecting swap using move in MCUboot which
aligns with the proper MCUboot symbol and allows for adding
additional mode Kconfigs
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
The offset value in the PSA ITS non-volatile space is dedicated to
OpenThread key reference IDs. This offset must not overwrite any
other ranges already in use within the PSA ITS non-volatile space.
Signed-off-by: Arkadiusz Balys <arkadiusz.balys@nordicsemi.no>
During experiments it was observed that workqueue uses a maximum of
3872 bytes, so, with cushion added set it to 4096.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
When connecting to a WPA3 connection, the max stack size observed was
5456, fix the SoF by increasing by 200bytes (cushion added).
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The LVGL OSAL also tries to set the name of threads. Adjust the function
signature accordingly. Also deal with the fact that the type
`lv_thread_prio_t` is not part of the private api and requires a
LV_USE_PRIVATE_API symbol to be enabled.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Make the alignment of the RTT control block configurable, defaulting to
16 bytes. The default is chosen as PyOCD fails to discover the control
block if the 16 byte ID array falls across a 32 byte boundary.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Recent versions fixed issues for EXMIF and TDM pins as well as support
for dynamic placement of the ETR buffer.
Signed-off-by: Karsten Koenig <karsten.koenig@nordicsemi.no>
Propagate device tree configuration for the power amplifier to
the HAL configuration header.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
When the SiSDK HAL was introduced, a corresponding Kconfig option
was not. Update Series 2 SoCs to use the new option.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
nRF boards have a ROM crunch esp. with combined with Matter/networking
features, as the advanced features are not essential for typical Wi-Fi
operation, disable them by default. Individual samples can choose to
enable it.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
User can assign callback functions to nrfs ipc backend
to be notified when connection is actually established.
Callbacks register needs to be done before nrfs is
initialized.
Signed-off-by: Łukasz Stępnicki <lukasz.stepnicki@nordicsemi.no>
This enables silabs series 2 hal source files for the silabs
acmp module to be compiled when the SOC_SILABS_ACMP
configuration is selected.
Signed-off-by: Christian Galante <christian.galante@silabs.com>
Based on few tests, it was observed that WPA supplicant's maximum usage
for connection and disconnection is 4360.
This would save ~4K which is huge as we have a crunch for RAM.
This was missed when hostap was upstreamed from NCS.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Add a Kconfig option which can be used to enable vendor HCI extensions for
Silicon Labs EFR32 devices.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
If BLE has already been enabled, `bt_enable` returns immediately
and does not call passed callback function.
In this case, call `bt_conn_cb_register` to ensure that callbacks
are registered correctly.
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
Currently, `CONFIG_OPENTHREAD_LOG_LEVEL` is used to set log level
in OT and register log modules in Zephyr. OpenThread allows 5
levels, causing issues when `OPENTHREAD_LOG_LEVEL_DEBG` is
selected ad we are trying to register modules with unknown lvl.
This commit adds `CONFIG_OPENTHREAD_MODULE_LOG_LEVEL` which is
aligned for Zephyr's log levels.
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
Add clocks property to CPUs. nRF54Lx series is using hfpll as clock
source for CPU (and fast peripherals). CPU clock frequency can be
derived from frequency of the source clock so clock-frequency property
is removed from cpu as it is redundant.
nrfx/MDK expects that NRF_CONFIG_CPU_FREQ_MHZ define is set to correct
CPU frequency. Modified nrfx CMakeLists.txt to use clock frequency of
hfpll instead of CPU clock-frequency property.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
-liblc3 added a library-internal path to zephyr_interface containing
a file that collides with common.h required e.g. by Mbed TLS
This commit fixes build-issues by making this include-folder
PRIVATE to the named library liblc3
Signed-off-by: Frank Audun Kvamtrø <frank.kvamtro@nordicsemi.no>
The commit exports control of MBEDTLS_ASN1_PARSE_C, in mbedTLS
module, via Kconfig.
This allows applications to use ASN1 parser independently from
other functions.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
What is changed?
- Use the updated TF-M that is compatible with the Zephyr's
latest Ethos-U driver repo.
- Change the default behavior of TF-M builds to use Ethos driver
locally fetched by Zephyr, using west update, instead of
downloading it from external repo.
Why is this change required?
- This is to be inline with Zephyr's rules to not fetch code from
external repo.
Fixes#81656
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
Selects CLOCK_CONTROL config whenever nRF 802.15.4 Radio Driver
is enabled.
The driver requires HFCLK api available under the config switch.
Signed-off-by: Piotr Koziar <piotr.koziar@nordicsemi.no>
This version of the HAL is based on the 2.1.0 release of the Raspberry
Pi Pico SDK.
Update `modules/hal_rpi_pico/CMakeLists.txt` to add the new include
directories to the build. See https://github.com/raspberrypi/pico-sdk/releases/tag/2.1.0
for more information.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
This is a follow-up to commit 8cfad44852.
Replace the deprecated BT_LE_ADV_CONN macro with BT_LE_ADV_CONN_FAST_2.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add support for the new nrf hal CRACEN CTR DRBG driver including a new
kconfig option to enable it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
534916c2253 moved some defines from CMakeLists.txt to nrfx_kconfig.h
but those defines are used by MDK which does not include nrfx_kconfig.h
and that broke some nrf platforms (e.g. nrf54l20). Moving those
defines back to CMakeLists.txt.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Allow user to specify protocol extensions when receiving data
from Ethernet network. This means that user can register L3
protocol handler using NET_L3_REGISTER() with the desired
protocol type. Ethernet code will then call the handler if
such a protocol type packet is received. This is currently
only implemented for Ethernet. The original IPv4 and IPv6
handling is left intact even if they can be considered to
be L3 layer protocol. This could be changed in the future
if needed so that IPv4 and IPv6 handling could be made
pluggable protocols.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Makes 802.15.4 use the API under CONFIG_CLOCK_CONTROL_NRF2
in nrf_clock_control.h to request/release HFCLK.
Previous HFCLK requesting/releasing on nRF54H20 was more
of a workaround and could produce issues when
comes to sharing the resources.
Signed-off-by: Piotr Koziar <piotr.koziar@nordicsemi.no>
This commit removes the TF-M support for the `xtools` toolchain variant,
which has been deprecated since Zephyr v3.3.0 and now removed.
Note that `zephyr` toolchain variant must be used instead of `xtools` when
building with Zephyr SDK.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
In lvgl_transform_buffer() the pixel map buffer start address is
modified to skip the library color palette header but the memcpy size
argument was not modified accordingly thus causing writes beyond buffer
reserved space.
Signed-off-by: Johan Lafon <johan.lafon@syslinbit.com>
Zephyr introduced postive feature flags to make advanced features
conditional but the upstream has followed a negative feature flag
for advanced features, and during upmerge these two weren't reconciled.
Fix the build in case advanced features are disabled.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
* Move all KConfig configuration from CMake to `nrfx_kconfig.h`
* Move macro utils from `nrfx_kconfig.h` to `nrfx_zephyr_utils.h`
* Move GRTC channels allocation from `nrfx_kconfig.h` to
`nrfx_reserved_resources.h`
Signed-off-by: Marcin Szymczyk <marcin.szymczyk@nordicsemi.no>
There is no reason to duplicate `nrfx_config_*.h` files.
Use configuration files from `hal_nordic/nrfx/templates`.
Signed-off-by: Marcin Szymczyk <marcin.szymczyk@nordicsemi.no>
Commit:
- adds dependency of the mbedtls psa usage on secure storage
- removes PSA ITS emulator and enables usage of
the secure storage in ble mesh bsim tests
- enables secure storage in all ble mesh and related samples
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
'wifi status' CMD shows wrong security information when STA connects to
Ext-AP with WIFI_SECURITY_TYPE_SAE_HNP, after connection using
WIFI_SECURITY_TYPE_SAE_AUTO. Setting sae_pwe for all the WPA3 SAE types
can fix this issue.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
add support SCE9 to entropy driver for Renesas RA
Signed-off-by: Minh Hoang <minh.hoang.wm@bp.renesas.com>
Signed-off-by: The Nguyen <the.nguyen.yf@renesas.com>
nrfx_config is setting NRFX_SPIM_EXTENDED_ENABLED based on presence of
a DT property. However, there are test cases when it is expected that
extended SPIM features will be disabled on a target that supports
extended features. Allow that by not setting the value if it is already
defined.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
For 'wifi status' and 'wifi ap status' cmd of the hostap case,
originally only support getting 'EAP-TLS' for the enterprise
mode, which is not correct. Now support getting the specific
enterprise mode, including the WPA3 enterprise mode and
the EAP method type.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Change Wi-Fi suiteb type into WPA3 enterprise security type, it
includes suiteB, suiteB-192 and WPA3 enterprise only mode.
Support setting WPA3 enterprise only mode, which should use
cipher_config->key_mgmt as WPA-EAP-SHA256, and the AKM in RSN
IE will show 00-0F-AC:5.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Remove EAP TLS SHA256 security, as it was added to support the AKM
of 00-0F-AC:5 in RSN IE, but actually this AKM is used by WPA3
enterprise only mode.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Add possibility to set channel in diag mode by implementing
`platformRadioChannelSet` API.
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
Fix platform radio state machine to be compliant with one shown in
OpenThread's `include/openthread/platform/radio.h`
Align twister tests to verify proper behavior of the
state machine.
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
Move the cmake file of OSAL to it's own repo and build as a standalone
library, this is porting friendly.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
We should use CONFIG_SOC_COMPATIBLE_NRF54L15 whenever possible.
With the current bsim model of 54L these files do not yet compile,
but that can be added separately.
Compilation warning:
```
/nrfx_interconnect_dppic_ppib.c:158:36:
warning: implicit declaration of function ‘nrf_address_bus_get’
[-Wimplicit-function-declaration]
158 | uint8_t bus_address_area =
nrf_address_bus_get(addr, p_dppic->apb_size);
| ^~~~~~~~~~~~~~~~~~~
```
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
What is changed?
Added config for Ethos-U85 and, the module `hal_ethos_u` now points
to the latest revision which has support for Arm Ethos-U85 NPU.
Why do we need this change?
This will help in validating the NPU when we add support for FVP
testing for Ethos-U85.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
There are 4 Kconfig names about the "Draw Buffer". Rename 'VBD' to 'VDB'
in Kconfig option 'LV_Z_*VBD*_CUSTOM_SECTION' to make name consistent.
config LV_Z_VDB_ALIGN
int "Rending buffer alignment"
config LV_Z_VBD_CUSTOM_SECTION
bool "Link rendering buffers to custom section"
config LV_Z_DOUBLE_VDB
bool "Use two rendering buffers"
config LV_Z_VDB_SIZE
int "Rendering buffer size"
default 100 if LV_Z_FULL_REFRESH
And the draw buffer definition is now:
static uint8_t buf0[BUFFER_SIZE]
#ifdef CONFIG_LV_Z_VDB_CUSTOM_SECTION
Z_GENERIC_SECTION(.lvgl_buf)
#endif
__aligned(CONFIG_LV_Z_VDB_ALIGN);
Signed-off-by: Haiyue Wang <haiyuewa@163.com>
Adds support for the NXP PXP engine. LVGL changed
the Kconfig symbol from LV_USE_GPU_NXP_PXP to
LV_USE_PXP, but hal_nxp still relies on
LV_USE_GPU_NXP_PXP, so add a temporary symbol for it.
Additionally the drawing engines need to invalidate
ranges in the dcache, the method needs to be provided
via a lvgl_support.h file.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
This patch adds the OSAL implementation of dynamic thread creation, mutex
and thread syncronization primitive (semaphore) enabling the use of the
parallel rendering architecture provided with LVGL 9.0. To use it, set
`CONFIG_LV_Z_USE_OSAL` and your preferred dynamic thread stack allocation
method (pool or heap).
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
This patch updates the module gluecode to be compatible with LVGL version
9.2. This includes changes done to display and input driver initialization
and draw buffer handling.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
The non-raw API has been removed from the nRF 802.15.4 Radio Driver.
There is no need to set NRF_802154_USE_RAW_API macro anymore in
CMakeLists.txt that integrates the driver.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
Despite having higher log buffer sizes the log messages are being
dropped due to high rate (and longer messages) as hostap debugging is
very verbose, so, use "immediate" logging by default. As hostap is only
for control path this will not have impact on timing.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
As kernel heap is used for hostap, which replaced libc heap, then no
need to consider the MBEDTLS_ENABLE_HEAP case. For enterprise case,
mbedtls will use MBEDTLS_HEAP or libc heap to allocate memory, instead
of the kernel heap.
Modify the heap size for enterprise case to have necessary memory.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
The LIS2DUXS12 is a smart, digital, 3-axis linear accelerometer whose
MEMS and ASIC have been expressly designed to combine the lowest current
consumption possible with features such as always-on antialiasing
filtering, a finite state machine (FSM) and machine learning core (MLC)
with adaptive self-configuration (ASC), and an analog hub / Qvar sensing
channel.
(https://www.st.com/en/mems-and-sensors/lis2duxs12.html)
Signed-off-by: Armando Visconti <armando.visconti@st.com>
For TFM example, MBEDTLS_PSA_CRYPTO_C has some dependencies and may not
be enabled, so use 'imply' instead of 'select' here for hostap
MBEDTLS_PSA case.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
It will be have a relative high probability to get continuous memory
for the next enterprise conenction, if free station certs memory
during disconnect, thus sys_heap need less memory for big size
EAP-TLS server cert packet, otherwise more memory space needed.
Signed-off-by: Rex Chen <rex.chen_1@nxp.com>
Add empty function stubs to support building with the newly introduced
CONFIG_BUILD_ONLY_NO_BLOBS option.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Unlike the RP2040, the RP2350 has multiple tick generators that need to
be started. Start TIMER0 and TIMER1 tick generators during
clock_control_init.
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
RP2350 is Raspberry Pi's newest SoC. From the datasheet:
"RP2350 is a new family of microcontrollers from Raspberry Pi that
offers significant enhancements over RP2040. Key features include:
• Dual Cortex-M33 or Hazard3 processors at 150 MHz
• 520 kB on-chip SRAM, in 10 independent banks
• 8 kB of one-time-programmable storage (OTP)
• Up to 16 MB of external QSPI flash/PSRAM via dedicated QSPI bus
...
"
This commit introduces some changes to support the existing RP2040 and
what is describe by Raspberry Pi as the "RP2350 family". Currently there
are 4 published products in the family: RP2350A, RP2350B, RP2354A, and
RP2354A. Within Zephyr's taxonomy, split the configuration as follows:
Family: Raspberry Pi Pico. This contains all RP2XXX SoCs,
SoC Series: RP2040 and RP2350.
SoC: RP2040 and, for now, just the RP2350A, which is present on the Pico
2, where the A suffix indicates QFN-60 package type. This structure is
reflected in `soc/raspberrypi/soc.yml`, and somewhat assumes that there
won't be a RP2050, for example, as a RP2040 with more RAM.
This is foundation work ahead of introducing support for Raspberry Pi's
Pico 2 board, which is fitted with a RP2350A and 4MB of flash.
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
In Kconfig, already check both dpp and enterprise mode for enable
NO_CONFIG_BLOBS, so remove the wrong one in the cmakelist.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Strong entropy/random sources are a must to get secure crypto algorithms,
but sometimes its useful to allow non-CS sources as well for sake of
test purposes. MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG_ALLOW_NON_CSPRNG was
designed exactly for this scope, but recently also TEST_CSPRNG_GENERATOR
was added and it acts similarly:
- MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG_ALLOW_NON_CSPRNG operates in
"zephyr/modules/mbedtls/zephyr_entropy.c" allowing
mbedtls_psa_external_get_random() to try both sys_csrand_get() first
and then sys_rand_get() as fallback.
- TEST_CSPRNG_GENERATOR instead operates in
"zephyr/subsys/random/random_test_csprng.c" and it basically wraps
the call to sys_csrand_get() with a call to sys_rand_get().
Albeit they operate at different level, the result is identical, so
Mbed TLS should support both of them when MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG
is set and there is no CSPRNG_ENABLED.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This is based on the introduction of a helper Kconfig symbol in
"subsys/random/Kconfig" which is named CSPRNG_AVAILABLE. When this is
enabled it means that there is a "zephyr,entropy" property defined in the
device-tree, therefore Mbed TLS can select ENTROPY_GENERATOR to allow
the platform specific driver to be included into the build.
This commit also changes other locations where CSPRNG_ENABLED was used
moving it to CSPRNG_AVAILABLE in order to solve dependency loop
build failures.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
The CONFIG_ZEPHYR_HAL_TDK_MODULE is always set if the module is on disk,
introduce an implied symbol to prevent a cmake warning if no TDK drivers
are needed.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
As per BHC-750 in TCAT case for now only allowed devices
are the ones that have either dual radio or multiplexed
radio capabilities. So the 'M' bit in BLE advertisement
should be always set to 1. In future specifications
devices without multiradio capabilities will be allowed
this is the reason why new Kconfig was introduced.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
Convert vendor specific **_WIFI_BUILD_ONLY_MODE symbol as global
in order to provide common build flag to enable CI with no blobs.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
At the present time, Zephyr does has overlap between sleeping and
suspending. Not only should sleeping and suspended be orthogonal
states, but we should ensure users always employ the correct API.
For example, to wake a sleeping thread, k_wakeup() should be used,
and to resume a suspended thread, k_thread_resume() should be used.
However, at the present time k_thread_resume() can be used on a
thread that called k_sleep(K_FOREVER). Sleeping should have nothing
to do with suspension.
This commit introduces the new _THREAD_SLEEPING thread state along
with some prep-work to facilitate the decoupling of the sleeping and
suspended thread states.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Update SystemCoreClock to match current core frequency. This MDK
variable is used by nrfx_coredep_delay_us which performs busy
waiting and is used by k_busy_wait.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add the ability to select littlefs disk version
to maintain backward compatibility
with existing littlefs
with the same major disk version.
Signed-off-by: Mikhail Siomin <victorovich.01@mail.ru>
In zephyr_hostapd_init, calls net_if_get_wifi_sap to get the SAP iface,
it means mgd iface of SAP type is registered before zephyr_hostapd_init.
Actually the mgd iface of SAP should be called in iface_api.init phase.
Therefore, remove unnecessary register of mgd iface in hostapd init.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
There are currently four types of roaming, 11r roaming, 11v roaming, 11k
roaming and legacy roaming, The priority of the roaming mode is
11r-->11v-->11k-->legacy roaming. If the ap does not support 11r/11v/11k
roaming, we will use legacy roaming. legecy roaming needs to do
full channel scan, which is the same as the general scan connection
process, so the legacy roaming time will be longer.
Signed-off-by: Gaofeng Zhang <gaofeng.zhang@nxp.com>
PSA_WANT_KEY_TYPE_xxx_KEY_PAIR_BASIC build symbols are automatically
enabled in Mbed TLS header files whenever any key pair feature between
IMPORT,EXPORT, GENERATE,DERIVE is set. So we mimic the same behavior with
Kconfig symbols:
- do not add BASIC to the automatic generated Kconfig file;
- let BASIC be auto-enabled as soon as any other feature (IMPORT,EXPORT,
GENERATE,DERIVE) is enabled for the same key type.
The 2nd point is achieved by adding a new Kconfig file which is meant
to hold the logic between PSA_WANT symbols. This is necessary because
Kconfig.psa is automatically generated.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Commit adds `diag transmit` used for transmission IEEE802154 packets
in specific amount and interval.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
We have now fully migrated to CRYPTO_ALT which is a superset, so, remove
unused CRYPTO module and it's related files.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
It is not needed to use always the system work queue to send a
message over IPC. In thread context IPC service can be called
directly. It speeds up the communication and allows to use nrfs
from the system work queue. Legacy approach could easily lead
to the deadlock if user would call nrfs from work queue and
pend on semaphore until response is received.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add the PSA_WANT_XXX settings that might be needed for various crypto
algorithms and Keys in WIFI_NM_WPA_SUPPLICANT_CRYPTO_MBEDTLS_PSA
configuration setting.
Signed-off-by: Vivekananda Uppunda <vivekananda.uppunda@nordicsemi.no>
This is the initial commit to support UART driver for Renesas RZ/G3S.
The driver only implements polling API for minimal support.
Signed-off-by: Nhut Nguyen <nhut.nguyen.kc@renesas.com>
Signed-off-by: Binh Nguyen <binh.nguyen.xw@renesas.com>
This is the initial commit to support pinctrl driver for Renesas RZ/G3S
Signed-off-by: Quang Le <quang.le.eb@bp.renesas.com>
Signed-off-by: Nhut Nguyen <nhut.nguyen.kc@renesas.com>
This adds minimal support for a new SoC Renesas RZ/G3S
Signed-off-by: Tien Nguyen <tien.nguyen.zg@renesas.com>
Signed-off-by: Nhut Nguyen <nhut.nguyen.kc@renesas.com>
Signed-off-by: Binh Nguyen <binh.nguyen.xw@renesas.com>
1.everytime ap wpa3 sae enable command will increase the sae_passpharse
list of config_bss, and sae_derive_pt will derive all sae pt in the
sae_passpharse list, every sae derive pt spend 100ms.
2.with the time going, the sae_passpharse list has more sae, and the
time to derive pt for sae will become long, sae_derive_pt will held
cpu and doesn't sleep.
3.hostapd task prio is 3, and imu task is 3, hostapd task run before
imu task, when the imu interrupt arrive and wake up the imu task, imu
task can't run,
4.hostapd task is deriving pt for every sae in the sae_passpharse
list. imu task can't run and sleep rwlock can't be release, sleep
rwlock timeout is 3s, when derive pt spend over 3s, wlcmgr task
waiting command resp on sleep rwlock will assert and hang.
Signed-off-by: Gaofeng Zhang <gaofeng.zhang@nxp.com>
Now that PSA is supported on Zephyr and the code base has changed to use
that library, TinyCrypt is been deprecate. Reasons for this change can be
found in #43712.
Signed-off-by: Flavio Ceolin <flavio.ceolin@gmail.com>
This is follow up to commit:
modules: hal_nordic: dvfs: added callback when scaling done
Used get and set timer user data functions.
Added missing help text in KConfig.
Signed-off-by: Lukasz Stepnicki <lukasz.stepnicki@nordicsemi.no>
Enable WPS PIN expire timeout parameter, this helps us in cleanup of
the Authorized MAC IE in the beacon in case no peer is connected
within the timeout.
Without this parameter the IE is not removed from the beacon.
Signed-off-by: Gaofeng Zhang <gaofeng.zhang@nxp.com>
Added support for SPI in 4-wire and 3-wire configurations to
the Infineon AIROC WiFi driver (drivers/wifi/infineon).
Review changes:
Move DT_DRV_COMPAT to common header file
Correct board-specific preprocessor lines
Removed AIROC_MAP_COUNTRY_CODE
Move Pico W configuration details to devicetree
Use pinctrl to manage shared data/interrupt GPIO
Clean up bus selection in Kconfig.airoc
Make SDIO and SPI bus struct independent
Replace LOG_DBG with LOG_ERR
Remove functionally duplicate operation
Remove spurious Kconfig option
Minor cleanup in CMakeLists.txt
Signed-off-by: Steve Boylan <stephen.boylan@beechwoods.com>
Combine BLE and 802.15.4 monolithic build under a single config to make
it less error prone.
The choice between a BLE/802.15.4 combo firmware and a BLE only firmware
is done depending on the Soc (like RW610 vs RW612).
Signed-off-by: Axel Le Bourhis <axel.lebourhis@nxp.com>
1) Unless ACS is being used, both "channel" and
"vht_oper_centr_freq_seg0_idx" parameters must be set.
Fixed "channel center segment 0" not being set in VHT Operation IE.
2) Set HT capabilities and VHT capabilities via the wifi ap config command.
3) Set AP bandwidth to wifi driver via the wifi_mgmt_api->ap_config_params.
Signed-off-by: Gang Li <gang.li_1@nxp.com>
MDK 8.68.1 uses nRF54L15_XXAA symbol for determining whether
given errata is applicable or not for nRF54L Series SoCs.
This causes all erratas to be disabled for nRF54L05 and nRF54L10.
To mitigate this DEVELOP_IN_NRF54L15 symbol needs to be defined,
and removed once new MDK is integrated.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
The signature of callback and the callback function is now changed, so,
add a wrapper to convert b/w them.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
MbedTLS Crypto ALT implementation clearly states that DPP3 isn't
supported, remove DPP3 to fix a build error related to HPKE.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
These files are now unconditiaonlly included, the defines within the
file takes care of both enable and disable of the feature.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This commit is to enable Ethernet drivers support on Renesas RA
MCU, first target support is the Renesas RA8 series
Signed-off-by: Duy Nguyen <duy.nguyen.xa@renesas.com>
Add support for mdio driver for Renesas RA MCU series
This support utilize the r_ether_phy driver in hal renesas
to support mdio write and read function
Signed-off-by: Duy Nguyen <duy.nguyen.xa@renesas.com>
The nrf wifi drivers include code related to qspi/spi bus. This work
moves bus related files to a new nrf70 bus library which is now
independent of the core driver and facilitlates building applications
directly using the bus APIs, agnostic to enabling wifi configs.
Signed-off-by: Bansidhar P.M <bansidhar.mangalwedhekar@nordicsemi.no>
Commit add `modcarrier` shell command for Openthread diagnostic mode.
Command can transmit modulated carrier out of device for test purposes.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
Added dppic0 node label, alongside the dppic to maintain backward
compatibility. The use of dppic0 is preferred.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Changed the CMakeLists to enable the nrfx_gppi utilities based solely on
the CONFIG_NRFX_GPPI Kconfig. This unifies the configuration on all nRF
SoC families.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
The resource reservation header is now included according to a Kconfig
value. The Kconfig can be overriden out-of-tree in case a different
header is needed.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
For the C sources the offloaded raw TX mode wasn't considered and else
case picks up system mode files causing build issues.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Added hw_mode check of AP with hostapd when getting link mode of current
station. If the hw_mode of AP is 11b, then the link mode of current
station will show 11b.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
Introduced few Kconfigs that allow to change default values
of MLE child timeout and child supervision timeouts.
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
Make sure that `MBEDTLS_PSA_ITS_FILE_C` is not defined when
`CONFIG_SECURE_STORAGE` is enabled as the former takes precedence over
the latter in Mbed TLS (`psa_crypto_storage.c`).
This fixes usage of the secure storage subsystem by Mbed TLS on platforms
such as `native_sim`.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
