Previously, hawkbit interface only supported a url/hostname and a port,
and internally it resolves to an IP address. This does not work for
network layers that rely on NAT64, like OpenThread. Zephyr's
implementation of `getaddrinfo` is not aware of NAT64. DNS will resolve
an IPV4 address that needs to be converted to IPV6 with the NAT64
prefix.
This commit alters the Hawkbit interface to allow providing an explicit
domain name as a string via `server_domain`, and an already resolved IP
address as `server_addr`.
This commit changes the usage of `hawkbit_runtime_config.server_addr` to
point to either an IP address or domain name. It adds a new Kconfig
(`HAWKBIT_USE_DOMAIN_NAME`) to specify an explicit domain name and adds
a new variable `hawkbit_runtime_config.server_domain`. If
`HAWKBIT_USE_DOMAIN_NAME` is enabled and a user provides an IP address
to `server_addr`, the user must provide a domain name to
`server_domain`.
Signed-off-by: Neal Jackson <neal@blueirislabs.com>
It is possible to manually set link address length past 6 at runtime
and trying to check IPv6 ll address that way. This should fail
as we could read two bytes past the address buffer.
Coverity-CID: 516242
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
It is possible to manually set link address length past 6 at runtime
and trying to generate IPv6 IID address that way. This should fail
as we could read two bytes past the address buffer. There is no issues
in the copying as the target buffer has plenty of space.
Coverity-CID: 516232
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Correct the size of the channel_setup_cfg array, as it should contain
entries for all available channels (AD4130_MAX_CHANNELS), not for the
available configuration slots (AD4130_MAX_SETUPS).
Move also checking of the channel index to the very beginning of
adc_ad4130_channel_setup(), to avoid potential writes to .live_cfg
beyond the channel_setup_cfg array.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
- Reset specific configuration bits in
USB1_HS_PHYC->USBPHYC_CR before setting new values.
- Set the Frequency Selection (FSEL) bits to operate
the USB PHY Control Register at 24 MHz for proper communication.
- Enable the OTGPHY1 peripheral clock using LL_AHB5_GRP1_EnableClock.
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
Add Set_WP function to set SPI flash WP line to low
Add Get_WP function to obtain status of the SPI flash WP line
Signed-off-by: Benson Huang <benson7633769@gmail.com>
Currently, the Zephyr dt requires address to the direction register
instead of the base GPIO address. usually means base address + 0x10 when
compared with Linux.
To make things more consistent between linux and zephyr, handle the
direction offset in the driver itself. This also lays the foundation for
supporting more than 32 GPIOs per port in the future by introducing
offsets for all the banks.
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
The USART is compatiable with the USART feature in sama7g5's Flexcom.
Update serial/usart_sam to support sama7g5.
Signed-off-by: Tony Han <tony.han@microchip.com>
The FLEXCOM offers several serial communication protocols that are
managed by the three sub-modules USART, SPI, and TWI (I2C).
Signed-off-by: Tony Han <tony.han@microchip.com>
Add code for sama7g5 Generic Clock, Main Clock, Main System Bus Clock,
Peripheral Clock, Programmable Clock and PLL Clock.
Signed-off-by: Tony Han <tony.han@microchip.com>
While getting alarm time, BIT(7) of each register is checked if it is
set, which send the alarm time as 0 to the requestor. Fix it by checking
if the BIT(7) of each register is not set.
Signed-off-by: Thiyagarajan Pandiyan <psvthiyagarajan@gmail.com>
update members in struct Netc_Eth_Ip_StationInterfaceConfigType
in RTD 2.0.1 for both psi and vsi driver code.
Netc_Eth_Ip_VsiToPsiMsgType need to relocate nocache section
in RTD 2.0.1
Signed-off-by: Tu Nguyen Van <tu.nguyenvan@nxp.com>
eMios_Icu_Ip_IndexInChState is changed to
eMios_Icu_Ip_u8IndexInChState and EMIOS_ICU_BUS_F
is removed in RTD 2.0.1
Signed-off-by: Tu Nguyen Van <tu.nguyenvan@nxp.com>
Now that api core functions check that denominator / numerator are not
null, it is no more necessary to perform this check within drivers.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Now that video api functions have __ASSERT_NO_MSG calls, drivers
do not need to check the entry point functions pointers.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Protect video API functions via __ASSERT_NO_MSG call to ensure that
required pointers are valid when entering functions.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Instead of relaying on stddef.h being included by other headers
let's include it explicitly, following a report of it being
missing for Ubuntu 22.04 (glibc 2.35)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The recommended reset sequence from the datasheet is as follows:
void SSD1309 ()
{
RES=0;
delay(1000);
RES=1;
delay(1000);
..
Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua>
file should be named after the compatible and these files where using
an incorrect vendor prefix.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Updated the description in the gd,gd32-i2c.yaml file to reflect the
correct name "GigaDevice" instead of "GigiDevice".
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Set new default minimum sleep amount for each power state. Users can
still update these values depending on their needs.
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
This commit enables power_mgmt_soc test for MAX32655 boards
- max32655evkit
- max32655fthr
RTC clocked in most low power modes so that this timer
is linked with idle timer. By this way device able to wakeup
from low power modes.
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
