Add support for flashing the Adafruit Feather nrf52840 Express
using UF2 over USB.
Also standardise on using the UF2 variant, so add a non UF2 variant
of the Sense board, so it can be flashed using the SWD headers.
Created flash dtsi files for both SWD and UF2. These are actually identical
for many other boards and should probably be moved to common in future.
Signed-off-by: Jacob Winther <jacob@9.nz>
Update both versions of adafruit feather nrf52840 to be variants rather
than separate boards. The aim is to provide a more consistent approach
and to remove some unnecessary Kconfig redundancy.
Signed-off-by: Jacob Winther <jacob@9.nz>
Commit consists of minimal set of overlays need to run tests
and samples. Additionally disables nRF54L15 platform in cpp98
tests, because unnamed unions are not supported.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
Move samples config files from 'boards' to 'socs' in order to
remove multiple files with the same configuration and render
available samples for new boards. Only changed sample files
which are not board or hardware specific.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Adafruit feather is a generic name that could match many
boards. Renamed to reflect actual board name:
- Adafruit Feather nrf52840 Express
There are two boards based on the nrf52840, so keeping directory
generic to support additional board defs with mostly shared dts.
Signed-off-by: Jacob Winther <jacob@9.nz>
This commit changes the adc_api test to use the proper printf
format specifier when printing the ADC samplings. This ensures
that all values are printed on 16-bit. Without this specifier,
negative values are sign-extended and printed on full integer
size (e.g., 0x8000 -> "0xFFFF8000").
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
This nucleo board inherit from the root `h5` dts some special nodes:
- `vbat` on adc1 channel 2
- `vref` on adc1 channel 17
- `die_temp` on adc1 channel 16
The issue is discussed here:
https://github.com/zephyrproject-rtos/zephyr/issues/72914
Signed-off-by: Alex Fabre <alex.fabre@rtone.fr>
`checkpatch.pl` requires that dts sources are indented with tabs,
fix all the spaces that slipped in while checkpatch wasn't watching.
Signed-off-by: Jordan Yates <jordan@embeint.com>
add the stm32h7s78_dk disco kit to run the tests drivers
This testcase is executed (XiP) from the external NOR
of the stm32h7s78_dk board.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
A collection of simple enablements to match some of the enablement
done for rd_rw612_bga as closely as possible on the frdm_rw612 board.
- i2c
- spi
- dma
- mrt
- ctimer
- os timer
- dac
- adc
- trng (alread was enabled but now listed support)
- watchdog
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Rename all Silicon Labs dev kits to always use the official kit name
as board target name. Previous kit names used various naming schemes,
including putting part of the SoC name in the board name. With HWMv2,
SoC names (if needed) should go in the SoC board qualifier.
Use HWMv2 revisions for the two variants of SLTB010A.
Split the xG27 Dev Kit from the EFR32BG22 Thunderboard. This attempt
at deduplication is confusing due to the very different kit names
and use of different ICs (BG22 vs BG27), and was not continued with
the xG24 Dev Kit, meaning that it wasn't consistent.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
There are several esp32-based boards that its conf and overlay
files are missing proper renaming to match cpu cluster.
This also removes all _SOC_ name from files.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
During the hwmv1->v2 transition, overlays from a base
board were made to be shared with the variants.
So at that time all overlays for variants which were
just copies of the base overlay were removed.
After that in
https://github.com/zephyrproject-rtos/zephyr/pull/71149
this shared/merged overlay behaviour was reverted,
but not all tests were fixed.
This is one of those. Let's fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Adjustments of overlay and conf files to adjust for the MERGE removal.
The revert of MERGE requires specific overlay and conf files for boards
which relied on the MERGE feature.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
These tests, that expects boards to be properly setup, allow one to
measure ADC value and compare to expected values.
Two tests are added. For one, a reference voltage is expected on the ADC
- and this value can be informed to the test via devicetree. The other
uses DAC to generate a value that is then read from ADC. This assumes
DAC is accurate. Naturally, one could make this a DAC test if ADC is
assumed to be accurate.
As the board setup involve connecting physical pins, they are behind
twister fixtures.
Signed-off-by: Yusuf Ahmed <muhammed.ahmed@intel.com>
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Move ADC DMA tests directly into adc_api test for Kinetis and STM32 boards.
Needs to disable CONFIG_TEST_USERSPACE for this subtest because of caching
issue for STM32H7 (as it was done dor adc_dma test).
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Fix board identifier in overlays for the lpcxpresso55s69_cpu0 target.
Board identifiers were renamed with the following command:
for file in $(find . -name "lpcxpresso55s69_cpu0.*"); do;
mv $file ${file/_cpu0/_lpc55s69_cpu0};
done
Additionally, remove lpcxpresso55s69_ns overlay targets where they are
no longer needed (or rename them where they are)
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
For the 64 bit targets, change identifiers to the new hwmv2 ones.
And remove redundant overlays (which were equal for the 32
and 64 bit versions)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
