To avoid possible linker warnings, when the linker may end up placing
this section in a segment with text and therefore with execute
permissions, with let's move it next to the .data section.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add kernel reboot support, so can use shell to verify reboot function.
uart:~$ kernel reboot cold
Known issue is imx93 currently can only support cold reboot and doen't
support warm reboot.
Updated board document.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
overhaul sample criteria and what we expect in a sample, especially
overhaul the twister part and what should be provided for good test
coverage.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add testcases for ICBMSG on nRF54L15 with only one endpoint,
including non-multithreading case.
Signed-off-by: Magdalena Pastula <magdalena.pastula@nordicsemi.no>
Mbed TLS automatically sets PSA_WANT_KEY_TYPE_[RSA/ECC]_KEY_PAIR_BASIC
whenever "_IMPORT || _EXPORT || _GENERATE || _DERIVE" operations
are set. Therefore we just set the proper actions where required.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This sample demonstrates how demand paging can be leveraged to deal with
firmware bigger than the available RAM if XIP is not possible. Select
code can be tagged to be loaded into memory on demand, and also be
automatically evicted for more code to be executed when memory is
exhausted.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Added option to set the ASE count through the bap API, making ASE
configuration runtime available. The upper limit of ASEs are still
bound by the Kconfig options set for ASEs.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Dangling hyphens at the end of a line are usually a problem, ie. you
have an "hyphenated-word" and breaking it on two line will render it as
"hyphenated- word".
This commit fixes the few occurences of such dangling hyphens.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The samples were written when UAC2 class supported only full-speed and
it was not clear how the high-speed would be supported.
Add the full-speed property so the samples can work with updated UAC2
implementation.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Without the IPv6-prefix set, the net_if_ipv6_addr_onlink() check
will always fail. The packets with DIP in the local link will go
to 'try_send' code branch, which is not expected.
Signed-off-by: Shrek Wang <shrek.wang@nxp.com>
The second Security object instance for bootstrap case isn't really
needed, as the bootstrap server creates own Security object instances
anyway. As that object instance had no Short Server ID assigned, it
caused failures during bootstrap discovery.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As there is no check (yet!) in the directive, many
.. zephyr-app-commands:: in the documentation are pointing to
non-existing sample applications, which is problematic for users who
typically expect to just copy-paste the commands and have them work.
This commit fixes all offending references to point to existing samples,
or converts them to simple ":app:" instead of ":zephyr-app:" when the
intent wasn't to refer to in-tree samples.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add support for running the audio BSIM tests on the
nrf5340bsim board.
This expands the tests we run in CI.
To support all tests with the hci_ipc sample for the netcore,
it is updated to support a bit more while still fitting on the
netcore on the nRF5340 series.
The behavior of advertisement seems to differ a little bit,
which required the bap_unicast_server_test.c to update how it
restarts advertisements.
Two broadcast tests that are passing on the nRF52 BSIM is also
failing due an assert. This should be investigated at a later
time.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use generic hook infrastrucutre instead of custom Kconfig and hooks for
ARM.
Replace z_arm_platform_init() with platform_reset().
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move the network buffer header file from zephyr/net/buf.h to
zephyr/net_buf.h as the implementation now lives outside of the networking
subsystem.
Add (deprecated) zephyr/net/buf.h header to maintain compatibility with old
file path.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
- Add overlay for the FRDM MCXN947 qspi variant
- Fix the overlay file name for the default variant
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Add standalone STM configuration to the sample.
Add configuration which instead of STM uses local UART for logging.
This configuration can be used to compare performance and flash
usage for various logging modes.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add sample that demonstrates logging using Coresight STM and ETR buffer
handled by the application core. Application is using sysbuild and 2
cores: cpuapp and cpurad. cpuapp is logging to STM and handling ETR buffer
where data from STM is collected and cpurad is only logging to STM.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
The current driver contains assembly code which is specific for the nRF51
SOC which makes it incompatible with other SOC's. This patch adds support
for other nRF SOC's as well. The timing is calucated based on the CPU clock
frequency, but can be configured manually as well if needed.
Changes have been verified on a Adafruit Feather nRF52840 Express board,
which contains a single NeoPixel RGB LED. Timings have been verified using
a scope connected to the WS1812 data line.
Signed-off-by: Chaim Zax <chaim.zax@zaxx.pro>
The ESP32 Wi-Fi driver previously did not support APSTA mode,
enabling AP mode would disable STA mode and vice versa.
Support for APSTA has been added by introducing additional
network interface: one for STA (Interface 2) and one for
AP (Interface 1). The CONFIG_ESP32_WIFI_AP_STA_MODE option in
Kconfig now allows enabling or disabling this support.
Signed-off-by: Muhammad Haziq <muhammad.haziq@zintechnologies.com>
The zephyr-app-commands directive can output a helpful hint to the user
when they are trying to build a sample that is in the Zephyr tree,
telling them to ensure they are in the root folder of the Zephyr repo.
Update all doc pages that were using :app: instead of :zephyr-app: so
that the hint is displayed.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adds missing code-sample directive to the remaining samples in
`samples/subsys` that didn't use it yet in preparation for upcoming
changes to the Zephyr documentation that will be leveraging the provided
description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Enabled Network shell and Ethernet L2 interface
with XGMAC driver in CLI application
Enabled MDIO shelll with dwcxgmac mdio driver.
Enabled TCP and UDP over IPV4.
Added intel_socfpga socdk support for echo_client and
echo_server sample applications.
Signed-off-by: Santosh Male <santosh.male@intel.com>
Add a sample that presents how the custom nrf2_clock_control API
introduced for nRF54H20 can be used for the various clocks which
are supported by it.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Describe the samples using code-sample directive in preparation for
upcoming changes to the Zephyr documentation that will be leveraging
the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Updates references to the net-tools project to refer to the correct
placement of net-tools under tools.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The TBS client callbacks are just informative so we
provide the information to multiple listeners.
To support this for the long strings, the function
handle_string_long_read was refactored.
This also allows for multiple users of the TBS client.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
With over a dozen LED samples, grouping them in a common drivers/led/
folder helps keep things tidy and lays the groundwork for further
improvements in the way samples are showing up in the docs.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The flash controller is nowadays supported on the M4 core.
Add the bank2-flash-size property to the board definitions as required
by the STM32 H7 flash driver.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Describe the samples using code-sample directive in preparation for
upcoming changes to the Zephyr documentation that will be leveraging
the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Modify USBD_DEFINE_MSC_LUN() to take in separate id by which the LUNs
are sorted. Previously the disk name itself was implicitly used as a
sorting key. This is a breaking change to Experimental API.
Another advantage of splitting the sorting id from disk name is the
ability to use KConfig symbols as disk name. Currently the MMC disk
driver uses KConfig symbol CONFIG_MMC_VOLUME_NAME.
Mark LUN definitions as static const because the LUNs are ending up in
ITERABLE_SECTION_ROM().
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
[Reproduce issue]
1. Connect In-STA to Ex-AP
wifi connect WiFi_STA_HE_1.1.8 1234567890 3 2 2
2. Start APUT with ACS using below commands
wifi ap enable nxp-AP 161 1234567890 3
3. Connect Ex-STA to APUT and verify association using ping traffic
4. Now start two TCP server
zperf tcp download -I ml 5001 192.168.0.252
zperf tcp download -I up 6002 192.168.10.1
Observed behavior:
=============
Second TCP server fails to start
[Analysis]
1. After starting uap and a tcp server,
there is only one allocatable fd resource
left in the fdtable.
2. When two TCP clients try to establish a connection
with the server at the same time, the second client
cannot be assigned an fd, resulting in a failure.
[Fix]
Increase the maximum number of open file descriptors.
Signed-off-by: Qiankun Li <qiankun.li@nxp.com>
Replace LL_EXTENSION_SYMBOL() with EXPORT_SYMBOL() in all tests and
samples.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Problem:
on cyw208xx devices i see sometime `Timed out while synchronizing`
error in samples periodical_adv_rps/periodical_sync_rps.
log:
<err> bt_scan: Could not lookup connection handle from PAST
<err> bt_scan: Unknown handle 0x0000 for periodic advertising report
Timed out while synchronizing
...
After investigation i can confirm, the sync was created successful,
but in application (periodical_sync_rsp) terminated the sync when the
connection is not valid.
periodical_adv_rps doesn't have any mechanism to wait for sync and after
gatt write (subevent, response_slot information) it immediately
performs disconnection.
Solution:
Added sync wait delay before make disconnection, to ensure sync
is established before disconnection.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Remove print "Failed to receive response...", if receive
BT_HCI_LE_ADV_EVT_TYPE_DATA_STATUS_RX_FAILED.
Problem: with cyw920829m2evk_02 device periodic_adv_rsp returns
multiple messages “Failed to receive response….” in the terminal
log.
This happens because controller generates
HCI LE Periodic Advertising Response Report event for each
RspSlot. Because no RSP_DATA is observed in the OTA, which
is no scan device to transmit RSP_DATA, no RSP_DATA can be
received. Therefore, Data Status is 0xFF in all of these events,
which finally cause the messages “Failed to receive response….”
Data_Status = 0xFF is expected because nothing is received
for that Rsp Slot.
Per spec, it’s not mandatory to generate these events,
So another vendors (e.g. Nordic) might skip the HCI event
generation if Data_Status = 0xFF.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Stores a magic value togetter with the counter value, and resets the
counter in case that magic does not match.
A small magic value is not ideal, but should be good enough for the
sample and avoids pulling in a additional dependency e.g. on crc.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Describe the samples using code-sample directive in preparation for
upcoming changes to the Zephyr documentation that will be leveraging
the provided description and metadata.
Also fixed a couple invalid or missing table of contents to have
proper document hierarchy.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The samples had a _iso suffix, but the other ISO samples
prefix iso_.
Renames the central and peripheral sample so that they
prefix iso_ rather than suffix _iso.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
With commit ad242b9, the buffer size was made configurable. Hence, the
corresponding definition CONFIG_SAMPLE_BUFFER_SIZE has to be used when
filling and displaying the buffer.
Signed-off-by: Joerg Hofrichter <joerg.hofrichter@ni.com>
New file with ADC configuration for UCANS32K1SIC evb.
Add ucans32k1sic_s32k146 to platform_allow.
Signed-off-by: Marcin Wierzbicki <marcin.wierzbicki@accenture.com>
This commit changes the default value of CONFIG_HELLO_WORLD_MODE to 'y'
so that the hello_world function is compiled as a built-in part of the
Zephyr image by default. This is the simplest possible configuration,
that works for all architectures.
To build hello_world as an llext module, the user must either follow the
commands in the documentation or set CONFIG_HELLO_WORLD_MODE=m in the
project file along with additional architecture-specific settings that
may be required for proper LLEXT support on the target.
Leave a note in the prj.conf and sample.yaml files to remind the user.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
The unicast server now prints when a steam enters the streaming
state.
This commit also slightly increases the metadata size to increase
interoperability with other devices such as Android.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
1) After the wifi driver successfully connects to the AP,
the dormant state should be set to OFF.
Once a deauth/disassoc frame is received or link lost occurs,
the dormant state should be set to ON.
2) Enable CONFIG_NET_TC_SKIP_FOR_HIGH_PRIO and CONFIG_NET_CONTEXT_PRIORITY
to push high priority packets directly to network driver.
Signed-off-by: Gang Li <gang.li_1@nxp.com>
This example demonstrates I2S audio playback combined with the codec
API. It can use the dmic API for audio input.
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>
Commit consists of minimal set of overlays need to run tests
and samples. Additionally disables nRF54L15 platform in cpp98
tests, because unnamed unions are not supported.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
This transforms the existing driver for the Microchip MCP9808
to be used as a generic driver to be used with all
JEDEC JC 42.4 compliant temperature sensor chips.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Added new flag CONFIG_WIFI_NM_HOSTAPD_AP for hostapd support. Once this
flag is enabled, softAP will be setup by hostapd. Both wpa_supplicant
and hostapd uses same task and eloop.
Included necessary hostapd files when compiling wifi samples if
CONFIG_WIFI_NM_HOSTAPD_AP is enabled. Added hostapd support for all
softAP command of L2 wifi shell commands.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
IPPROTO_IPV6 option was set on TCP socket (besides doing it already in
tcp.c) instead of UDP. Fix that.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Describe the samples using code-sample directive in preparation for
upcoming changes to the Zephyr documentation that will be leveraging
the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Describe the samples using code-sample directive in preparation for
upcoming changes to the Zephyr documentation that will be leveraging
the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Describe the samples using code-sample directive in preparation for
upcoming changes to the Zephyr documentation that will be leveraging
the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Drop support for Google Kukui EC board which was used for
early Zephyr experiments but doesn't really exist anymore.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Remove `SPI_NOR_IDLE_IN_DPD` to simplify the possible transition states
in the `spi_nor` driver. This option was originally added 5 years ago
when device runtime PM was in a much less mature state.
I do not believe having a separate power management implementation for
this one in-tree driver is in the interests of the project.
The behaviour of `SPI_NOR_IDLE_IN_DPD` leads to extremly suboptimal
behaviour in use cases where multiple small reads are performed
sequentially, see #69588.
Removal of this option does not break the behaviour of any existing
applications, only increases current consumption in idle by ~10uA until
device runtime PM is enabled.
Signed-off-by: Jordan Yates <jordan@embeint.com>
The driver in tree is for u-blox M8 devices, not M10. The M10 series
devices (from Protocol Version 23.01) use a different, non backwards
compatible interface for configuring the modem behaviour.
Of the two boards tested in the original PR, the "VMU RT1170" is
explicitly listed as having a u-blox NEO-M8N modem, while I have
been unable to find any information online about the "FMURT6" board.
Leaving the naming as-is will cause problems when M10 drivers are
contributed.
Signed-off-by: Jordan Yates <jordan@embeint.com>
The sample illustates how to achieve bidirectional asynchronous audio.
Implicit feedback is the only way to achieve asynchronous USB headset
on devices that have only one isochronous IN and one isochronous OUT
endpoint.
The sample implements stereo playback and mono recording. While it would
be possible to have stereo recording, the commonly available headsets
are mono only. The number of channels can differ between audio sink and
source because the only requirement is that the two run on same clock.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Low throughput links (e.g. IEEE 802.15.4) require additional stack and
buffering resources. Therefore some stack and buffer pool sizes were
increased to cater for over-the-air scenarios.
Fixes: #77287
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
ENABLED suffix does not really makes much sense for a kconfig
so it should be removed. Also other MBEDTLS symbols were recently
updated accordingly.
Moreover having it named exactly the same way as in Mbed TLS
symplifies the understanding of what this kconfig is doing.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
