HFXO is represented as a child of the oscillators node. A new node is
created because it requires its own properties (see the binding for more
details).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
LFXO is represented as a child of the oscillators node. A new node is
created because it requires its own properties (see the binding for more
details).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
- Create a new compatible: nordic,nrf53x-oscillators, as other series,
e.g. nRF54LX contain a similar but different IP (with PLL control,
etc.)
- Adjust DT: use recommended node name, remove redundant status okay.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Register all the lpi2c instances.
Add no-power-level property and update driver
to adapt no-power-level property.
Signed-off-by: Lucien Zhao <lucien.zhao@nxp.com>
This defines raspberrypi,pico-xosc along with a configurable startup
delay multiplier. On some boards, the XOSC takes longer to stabilize.
Signed-off-by: Xudong Zheng <7pkvm5aw@slicealias.com>
This fixes the following warning:
> unit address and first address in 'reg' (0x3fc70) don't match for
> /soc/peripheral@40000000/flash-controller@34000/flash@9fc70
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This fixes the following warnings:
> unit address and first address in 'reg' (0x40094000) don't match for
> /soc/peripheral@40000000/usbhs@144000
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This fixes the following warning:
> unit address and first address in 'reg' (0x3fc70) don't match for
> /soc/peripheral@40000000/flash-controller@34000/flash@9fc70
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This fixes the following warnings:
> unit address and first address in 'reg' (0x40094000) don't match for
> /soc/peripheral@40000000/usbhs@144000
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Add MCO device nodes to the STM32 boards.
The set of supported boards are chosen to replace what is currently
supported in Kconfig.
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
Add clock sources that can be output by the MCO on the stm32f1x and
stm32f10 connectivity line devices.
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
`-` is preferred over `_` in devicetree property names.
Since, change `clk_src`, `clk_div`, and `clk_out_div` to
`clk-src`, `clk-div`, and `clk-out-div`.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
There is an issue on the SHI hardware peripheral to detect CS
rising/failing with bits CSnFE/CSnRE in the EVSTAT2 register in
npcx9m7fb chip. This commit workarounds it by using MIWU to detect the
CS rising and failing.
Signed-off-by: Tom Chang <CHChang19@nuvoton.com>
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
The internal flash size of npcx9m7fb is 512KB. Reduce the default
Code RAM size from 320KB to 256KB because the Code RAM size is limited
by FLASH_SIZE/2 in the Chromebook EC application.
Signed-off-by: Tom Chang <CHChang19@nuvoton.com>
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Adds Device Tree include files for all MCUs in the STM32WB0 series.
These DTSI files only contain the supported peripherals for now.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Add timer instance in device tree
Add timer yaml file
Timer0/1/2/3 are common for MAX32xxx MCUs
MAX32655 has additional Timer4/5 which are low power timers
Co-authored-by: Mert Vatansever <mert.vatansever@analog.com>
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
we have four i2C peripherals .
- three shared between stm32u031/73/83
- One between stm32u073/83
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
This reverts commit 518de763a6.
This commit switched nrf5340 devices to use the icbmsg
IPC backend.
Unfortunately this backend is not currently supported
in the nrf5340bsim target (it is not properly configured)
which results in a segfault during its initialization.
As this issue is currently blocking CI for all BT development
in Zephyr, let's revert this provisionally while we add
support for it.
See
https://github.com/zephyrproject-rtos/zephyr/issues/78099
for more info.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
