Do not use SYS_INIT for initializing irq_offload when enabled, instead
using a new interface that is called during the boot process for all
architectures.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a new call for initializing cache on architectures that need that.
Avoid using SYS_INIT for this and instead call the hook in a fixed place
and run if implemented.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use generic hook infrastrucutre instead of custom Kconfig and hooks for
ARC.
Replace soc_early_asm_init_percpu() with platform_reset()
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Introduce soc and board hooks to replace arch specific code
and replace usages of SYS_INIT for platform initialization.
include/zephyr/platform/hooks.h introduces the hooks to be implemented
by boards and SoCs.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
custom arch_cpu_idle and arch_cpu_atomic_idle implementation was done
differently on different architectures. riscv implemented those as weak
symbols, xtensa used a kconfig and all other architectures did not
really care, but this was a global kconfig that should apply to all
architectures.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move this to a call in the init process. arch_* calls are no services
and should be called consistently during initialization.
Place it between PRE_KERNEL_1 and PRE_KERNEL_2 as some drivers
initialized in PRE_KERNEL_2 might depend on SMP being setup.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Platforms that support IPIs allow them to be broadcast via the
new arch_sched_broadcast_ipi() routine (replacing arch_sched_ipi()).
Those that also allow IPIs to be directed to specific CPUs may
use arch_sched_directed_ipi() to do so.
As the kernel has the capability to track which CPUs may need an IPI
(see CONFIG_IPI_OPTIMIZE), this commit updates the signalling of
tracked IPIs to use the directed version if supported; otherwise
they continue to use the broadcast version.
Platforms that allow directed IPIs may see a significant reduction
in the number of IPI related ISRs when CONFIG_IPI_OPTIMIZE is
enabled and the number of CPUs increases. These platforms can be
identified by the Kconfig option CONFIG_ARCH_HAS_DIRECTED_IPIS.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Make `struct arch_esf` compulsory for all architectures by
declaring it in the `arch_interface.h` header.
After this commit, the named struct `z_arch_esf_t` is only used
internally to generate offsets, and is slated to be removed
from the `arch_interface.h` header in the future.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Regarding recent changes in general MPU configuration
(https://github.com/zephyrproject-rtos/zephyr/pull/71969), add
appropriate configs for isolating thread stacks into ARC MPU.
Signed-off-by: Nikolay Agishev <agishev@synopsys.com>
Found via static analysis. In fault path when checking for stack
overflows, if CONFIG_MULTITHREADING is not set, `guard_end` is left
uninitialized and is subsequently used in a comparison.
The solution is to simply return `false` in this configuration as stack
guards are not configured in the first place.
Signed-off-by: François Baldassari <francois@memfault.com>
Simple rename to align the kernel naming scheme. This is being
used throughout the tree, especially in the architecture code.
As this is not a private API internal to kernel, prefix it
appropriately with K_.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Simple rename to align the kernel naming scheme. This is being
used throughout the tree, especially in the architecture code.
As this is not a private API internal to kernel, prefix it
appropriately with K_.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Some applications turn logging off. It makes impossible to get information
about exceptions if it occures.
This PR restores correct behavior of Error_Dump messages, and
exception dump is printed anyway independent on CONFIG_LOG.
ARC_EXCEPTION_DEBUG added to default boards configs in addition to nsim.
CONFIG_FAULT_DUMP removed from ARC branch as it has been unused
since v1.8.0
Signed-off-by: Nikolay Agishev <agishev@synopsys.com>
In case of ARCv3 we have shared cache disabled after
reset (in ARCv2 it was enabled by default). Let's
enable it at early boot phase (if it's available in HW).
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
ARCv3 processors have HW prefetch feature which is disabled
after reset. Let's enable it.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Use sys_cache_data_enable instead of arch_dcache_enable to enable
the cache. This will ensure that CONFIG_CACHE_MANAGEMENT
is considered correctly.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Different architecture are doing this in custom ways and using different
naming conventions, unify this interface and make it part of the arch
implementation for SMP.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
introduce global DSP_SHARING and CPU_HAS_DSP to be used by all
architectures and change existing usage in ARC to use those global
configs.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This PR fixes https://github.com/zephyrproject-rtos/zephyr/issues/64268
MWDT supposes .device_states section as BSS because .device_states
variables defined as uninitialized. This causes the section marked
as NOLOAD section and OpenOCD does not take it in account while
flashing it into board memory.
Finally .device_states variables becomes initialized with garbage
from RAM.
In this PR it's suggested to clean .device_states in early init stage.
Signed-off-by: Nikolay Agishev <agishev@synopsys.com>
This header is private and included only in architecture code, no need for
it to be in the top of the public include directory.
Note: This might move to a more private location later. For now just
cleaning up the obvious issues.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We are missing setting of switch_handle for the thread which
is aborting due to exception (i.e. in case of k_panic or
__ASSERT triggered). This may cause livelock in SMP code
after a08e23f68e commit ("kernel/sched: Fix SMP
must-wait-for-switch conditions in abort/join").
Fix that.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
The init infrastructure, found in `init.h`, is currently used by:
- `SYS_INIT`: to call functions before `main`
- `DEVICE_*`: to initialize devices
They are all sorted according to an initialization level + a priority.
`SYS_INIT` calls are really orthogonal to devices, however, the required
function signature requires a `const struct device *dev` as a first
argument. The only reason for that is because the same init machinery is
used by devices, so we have something like:
```c
struct init_entry {
int (*init)(const struct device *dev);
/* only set by DEVICE_*, otherwise NULL */
const struct device *dev;
}
```
As a result, we end up with such weird/ugly pattern:
```c
static int my_init(const struct device *dev)
{
/* always NULL! add ARG_UNUSED to avoid compiler warning */
ARG_UNUSED(dev);
...
}
```
This is really a result of poor internals isolation. This patch proposes
a to make init entries more flexible so that they can accept sytem
initialization calls like this:
```c
static int my_init(void)
{
...
}
```
This is achieved using a union:
```c
union init_function {
/* for SYS_INIT, used when init_entry.dev == NULL */
int (*sys)(void);
/* for DEVICE*, used when init_entry.dev != NULL */
int (*dev)(const struct device *dev);
};
struct init_entry {
/* stores init function (either for SYS_INIT or DEVICE*)
union init_function init_fn;
/* stores device pointer for DEVICE*, NULL for SYS_INIT. Allows
* to know which union entry to call.
*/
const struct device *dev;
}
```
This solution **does not increase ROM usage**, and allows to offer clean
public APIs for both SYS_INIT and DEVICE*. Note that however, init
machinery keeps a coupling with devices.
**NOTE**: This is a breaking change! All `SYS_INIT` functions will need
to be converted to the new signature. See the script offered in the
following commit.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
init: convert SYS_INIT functions to the new signature
Conversion scripted using scripts/utils/migrate_sys_init.py.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
manifest: update projects for SYS_INIT changes
Update modules with updated SYS_INIT calls:
- hal_ti
- lvgl
- sof
- TraceRecorderSource
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: devicetree: devices: adjust test
Adjust test according to the recently introduced SYS_INIT
infrastructure.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: kernel: threads: adjust SYS_INIT call
Adjust to the new signature: int (*init_fn)(void);
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use interrupts (with dedicated interrupt line) for irq_offload
instead of exception-based implementation.
That allows to implement IRQ_OFFLOAD without adding special code
to interrupt / exception path for IRQ_OFFLOAD handling and,
moreover, test the real interrupt code.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
add DSP reg in context switch
add AGU reg in context switch to support XY mem
add thread option and API to dis/enable DSP switch
Signed-off-by: Siyuan Cheng <siyuanc@synopsys.com>
The cache operations must be quick, optimized and possibly inlined. The
current API is clunky, functions are not inlined and passing parameters
around that are basically always known at compile time.
In this patch we rework the cache functions to allow us to get rid of
useless parameters and make inlining easier.
In particular this changeset is doing three things:
1. `CONFIG_HAS_ARCH_CACHE` is now `CONFIG_ARCH_CACHE` and
`CONFIG_HAS_EXTERNAL_CACHE` is now `CONFIG_EXTERNAL_CACHE`
2. The cache API has been reworked.
3. Comments are added.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Control shared interrupts enabling/disabling via IDU.
With that we can easily enable and disable them for all cores
in one place.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Make ARC_MP_PRIMARY_CPU_ID definition public so it can be used in
other ARC code.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
