This removes the deprecated CONFIG_NET_PKT_BUF_DATA_POOL_SIZE.
User should either use CONFIG_NET_PKT_BUF_RX_DATA_POOL_SIZE or
CONFIG_NET_PKT_BUF_TX_DATA_POOL_SIZE depending of net packet type.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Use CONFIG_NET_TCP_INIT_RETRANSMISSION_TIMEOUT and
CONFIG_NET_TCP_RETRY_COUNT to control the total timeout at the TCP
level.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The asserts were not proper here, replace those by runtime
checks as the functions can be called from applications and
asserts are not meant for error checking.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When IPv4 address is added, currently the netmask remains empty. This
makes it impossible to use the address now that the netmask is
considered during address selection if the application does not
specify the netmask manually. Therefore specify a default netmask for
IPv4 addresses added to an interface with Kconfig.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Bit-wise comparing of the entire IPv4 addresses doesn't make much sense
as when selecting the source address for communication, what really
matters is the subnet part.
Doing so may actually lead to unexpected results, i. e. two addresses
within the same subnet should be considered equally good for
communication within the subnet, yet comparing the unique part of
the address (beyond the netmask) may lead to different results.
This is a problem for the mechanism of preferring the default interface
for LL communication if two interfaces have LL addresses with the
default subnet mask.
Fix this by filtering out the subnet from the IPv4 address before
passing it to net_if_ipv4_get_best_match() function.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Currently we blindly return the LL address found on the default
interface or else on the first interface that has a valid LL address
configured.
This doesn't work well, if different interfaces have LL addresses
configured with a different subnet mask. Therefore, instead of blindly
selecting the address based on the first LL address encountered, use
net_if_ipv4_get_best_match() function for LL addresses to find the best
match for the given interface.
The rework takes into account current behavior, i. e. default interface
still gets the preference if there is no better candidate.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add support for IP_LOCAL_PORT_RANGE socket option. The option
supports both IPv4 and IPv6 sockets although the type is IPPROTO_IP.
The option can be used to enforce the ephemeral port number selection
to be in certain range.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Make sure that we cannot connect to IPv4 multicast or broadcast
destination address for a TCP socket.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This is helper is only needed in socket multicast interface selection
where we need to get one address from the interface so that it will
tell (when getsockopt() is used), the interface IPv4 address where
multicast packets will be sent. This is private function which is not
needed in public headers so place the prototype to net_private.h file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Do the selection same way as in IPv6 so that if user supplies
unspecified destination address, the default interface is selected
the same way.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Some of the network tests require that source and destination
addresses are not swapped so allow test to control the address
swapping from the test.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
After we take the true MTU into account, we need to send proper
number of bytes (multiple of 8) in one IPv6 fragment.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If PMTU is enabled, then use the MTU value from it instead of always
using network interface MTU.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If PMTU is enabled, then use the MTU value from it instead of always
using network interface MTU.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add IPV6_MTU IPv6 socket option and implement getsockopt() and
setsockopt() calls for the option.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add IP_MTU IPv4 socket option and implement getsockopt()
call for the option. The IP_MTU option does not support
setsockopt() call.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Send a network management event for a changed path MTU value.
Both IPv4 and IPv6 have their own events as we cannot mix these
because how the network event numbering space is implemented.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Catch "Destination Unreachable" ICMPv4 messages and update PMTU for
a given destination IPv4 address.
Use that PMTU when sending data to the destination.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Show information whether PMTU is enabled or not.
Show pmtu destination cache content with "net pmtu"
command. The "net pmtu flush" can be used to clear the
cache.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Catch "Packet Too Big" ICMPv6 messages and update PMTU for
a given destination IPv6 address.
Use that PMTU when sending data to the destination.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Print more cases when the packet is dropped, and also print
the upper layer verdict for the packet.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This adds generic code that can be used by both IPv4 and IPv6
Path MTU Discovery mechanism. The actual PMTU support for each
protocol family is in subsequent commits.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This implements support for RFC 7217 which describes a method
to have stable IPv6 Interface Identifiers to be used with IPv6
Stateless Address Autoconfiguration (SLAAC). The stable IIDs are used
to provide enhanced privacy so that an IPv6 address configured using
this method is stable within each subnet, but the corresponding
Interface Identifier changes when the host moves from one network
to another. This method is meant to be an alternative to generating
Interface Identifiers based on hardware (MAC) addresses,
such that the benefits of stable addresses can be achieved without
sacrificing the security and privacy of users.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If trying to parse a string like 192.0.2.2:80/foobar and
setting the length to 12 which means to parse the IP address
and port, the parsing failed because it used one extra character
from the string. This issue was not present if the input string
was terminated after the port number.
Add a test case to catch this problem.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If we could not fragment the IPv6 packet, then drop it and do
not try to send it. Let the upper layer re-send the packet if
needed. It is causing more trouble if we try to send the packet
and not honor the MTU setting.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If we could not fragment the IPv4 packet, then drop it and do
not try to send it. Let the upper layer re-send the packet if
needed. It is causing more trouble if we try to send the packet
and not honor the MTU setting.
Fixes#81021
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The second condition needs to check ARP probes only
The ACD is not properly implemented as described in RFC5227 ch. 2.1.1
The implementation incorrectly detects an IP conflict, if an ARP request
is received for the target IP.
The reason is that the current implementation checks for ARP requests
instead of ARP probes.
Signed-off-by: Andreas Huber <andreas.huber@ch.sauter-bc.com>
Originally, the net_mgmt task priority is very low. Based on roaming
implementation, roaming is triggered in net_mgmt task. When running UDP
test while doing roaming, the net_mgmt task won't have much chance to
run and roaming can't be triggered.
Increase it to 3, which is same value of supplicant task.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
If CONFIG_NET_PKT_ALLOC_STATS is enabled, then "net mem" command
can show net_pkt allocation statistics like succeed / failed
allocation counts, average sizes and allocation time.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add igmp.h file to declare definitions for IGMP that are not meant te be
included by the application but can be used in e.g. tests.
Signed-off-by: Ibe Van de Veire <ibe.vandeveire@basalte.be>
According to RFC2236 section 2.5, the IGMP message may be longer then 8
bytes. The rest of the bytes should be ignored.
Signed-off-by: Ibe Van de Veire <ibe.vandeveire@basalte.be>
The header length of the net ip packet was calculated using only the
net_pkt_ip_hdr_len function. The correct header length should be
calculated by adding net_pkt_ip_hdr_len and net_pkt_ipv4_opts_len. This
resulted in an incorrect IGMP version type in case of IGMPv2 message
(when IGMPv3 was enabled). The IGMP message was not parsed correctly and
therefore dropped.
Signed-off-by: Ibe Van de Veire <ibe.vandeveire@basalte.be>
IPv6 based interface lookups doesn't require native IP stack support,
hence reflect that in the API.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
IPv6 MLD API was so far defined in an internal header. This does not
seem correct though, as application code should be able to join/leave
multicast groups, hence the API should be exposed in a public header,
just as it is done for its IPv4 countepart - IGMP.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Net offloading doesn't need net TC threads to be enabled as they're used
by the native stack. This fixes build if CONFIG_NET_OFFLOAD is enabled
but native stack is disabled.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case NET_NATIVE is disabled, certain network stack components do not
need to be compiled. Otherwise, they could throw errors if
--no-gc-sections compiler options is enabled.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The stack size for the event_mon_stack task may need to be larger than the
default 1024 to avoid crashes. It should be configurable through Kconfig
so that source code doesn't need to be modified to increase it.
Signed-off-by: Dave Rensberger <davidr@beechwoods.com>
A null check for the TCP connection `conn` was added at the start of
the function, but the previous checks were not removed, leading to
a redundant null check, which is unnecessary.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Resetting the connect semaphore from tcp_conn_unref() prevents the
ref/unref mechanism from being used freely when needed. Therefore, move
the code responsible for resetting pending connection to
tcp_conn_close() (called only when the connection is being closed on
behalf of the TCP stack, for instance due to RST being received) and to
net_tcp_put() (connection closed on behalf of the application).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
