It becomes the new default when the secure_storage_its_partition
devicetree chosen property is defined as it is a preferred alternative.
See the help message of the
`CONFIG_SECURE_STORAGE_ITS_STORE_IMPLEMENTATION_ZMS` Kconfig option
for more information.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
posix.common contains testsuites that can be separated into smaller
groups of tests. This change moves tests in the xsi_threads_ext
option group into a singular testsuite tests/posix/xsi_threads_ext
app directory.
Signed-off-by: Marvin Ouma <pancakesdeath@protonmail.com>
Add Devicetree overlay for sample drivers/led/pwm and fix the one in
basic/blinky_pwm for nucleo_l4r5zi board to set appropriate to enable
pwdleds and set appropriate timer prescaler.
Signed-off-by: Yishai Jaffe <yishai1999@gmail.com>
In zephyr_hostapd_init, calls net_if_get_wifi_sap to get the SAP iface,
it means mgd iface of SAP type is registered before zephyr_hostapd_init.
Actually the mgd iface of SAP should be called in iface_api.init phase.
Therefore, remove unnecessary register of mgd iface in hostapd init.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Default enable WIFI_NM for both supplicant and embedded supplicant
case, to distinguish STA and SAP interface when use L2 layer.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
There are currently four types of roaming, 11r roaming, 11v roaming, 11k
roaming and legacy roaming, The priority of the roaming mode is
11r-->11v-->11k-->legacy roaming. If the ap does not support 11r/11v/11k
roaming, we will use legacy roaming. legecy roaming needs to do
full channel scan, which is the same as the general scan connection
process, so the legacy roaming time will be longer.
Signed-off-by: Gaofeng Zhang <gaofeng.zhang@nxp.com>
These device driver APIs were merged after the DEVICE_API macro was
introduced.
Cleanup these leftover drivers.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Remove hard-coded clock values from device tree nodes,
instead read the clock values from the clock controller
during run time.
Signed-off-by: Girisha Dengi <girisha.dengi@intel.com>
The clock controller/manager registers are updated with
the correct divider values by bootloader via hand-off
data, so now we can use the clock controller to get the
clock value of each peripheral during the run time.
Signed-off-by: Girisha Dengi <girisha.dengi@intel.com>
CONFIG_PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_BASIC is promptless so it cannot
be selected. Moreover it's also automatically enabled by
CONFIG_PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_GENERATE in the same overlay file
so there would be no need to explicitly enable it.
As for the IMPORT, EXPORT, DERIVE they are needed for the TLS connection
to work properly. Previously it was working because at least IMPORT and
EXPORT are internally enabled by Mbed TLS at build time. So here we
are basically doing the same enablements with Kconfigs in clear.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
PSA_WANT_KEY_TYPE_xxx_KEY_PAIR_BASIC build symbols are automatically
enabled in Mbed TLS header files whenever any key pair feature between
IMPORT,EXPORT, GENERATE,DERIVE is set. So we mimic the same behavior with
Kconfig symbols:
- do not add BASIC to the automatic generated Kconfig file;
- let BASIC be auto-enabled as soon as any other feature (IMPORT,EXPORT,
GENERATE,DERIVE) is enabled for the same key type.
The 2nd point is achieved by adding a new Kconfig file which is meant
to hold the logic between PSA_WANT symbols. This is necessary because
Kconfig.psa is automatically generated.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
The board hardware has no network interfaces, although the ECM/EEM class
implementation can provide Ethernet-like functionality and export it to
the host, this is no reason to default to a specific USB class
implementation.We do not make this kind of configuration for other
boards that have a USB device controller. Also, it may not be what a
user expects when using these boards with networking and a USB stack.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Remove all USB and CDC ACM configuration in favor of common
configuraiton.
Do not adapt board-specific configurations such as unknown PID/VID or
string descriptors. There is no justification for using them on specific
boards, and we do not have formal approval to use them in the project
tree. Also, we need more uniform configuration, since the main reason
for enabling CDC ACM here is to allow users to run examples like
hello_world right out of the box. Of course, anyone is free to customize
these settings in their fork or downstream project.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Many boards have similar code to configure the USB and CDC ACM UART that
they want to use as a logging or shell backend. Some of them have an
incorrect or incomplete configuration.
These boards do not have a built-in debug adapter, but a SoC with a USB
device controller and a bootloader with USB device support. Introduce
common CDC ACM UART configuration that these boards should use for
logging or shell backend to avoid duplicate or incorrect configuration.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Prevent the driver from perfroming transfer when SPI_LINES_OCTAL flag
is specified, as this driver supports only SPI_LINES_DUAL for now.
Signed-off-by: Michal Morsisko <morsisko@gmail.com>
Add support for sending and receiving the least significant bit first
for the spi_bitbang driver. This driver can now be used with
SPI_TRANFER_LSB flag.
Signed-off-by: Michal Morsisko <morsisko@gmail.com>
The actual clock speed of the bus is partially determined by the
rising/falling edges of the SCL. These settings allow applications
to tune the clock based on board characteristics.
Signed-off-by: Corey Wharton <xodus7@cwharton.com>
CMakeLists.txt uses the C compiler parameter -include,
This is causing issues for other toolchains and needs to generalized.
Signed-off-by: Robin Kastberg <robin.kastberg@iar.com>
CLion now offers a more native approach to working with Zephyr projects.
We would like to inform users about this.
Signed-off-by: Oleg Zinovyev <oleg.zinovyev@jetbrains.com>
This fixes an issue where wrong values were checked against block device
defaults. Kconfig values are used when no filesystem config values are
provided, and the buffers are sized according to the Kconfig values,
but the checks were only performed against filesystem config variables.
Signed-off-by: Djordje Nedic <nedic.djordje2@gmail.com>
Add a check to set the warnings_as_errors flags in unit tests if
CONFIG_COMPILER_WARNINGS_AS_ERRORS is specified, this should catch
warnings in unit test twister runs.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This flag is set on other compiler as well for normal builds, and
suppresses a warning for empty print, which is apparently quite common.
The unit test build uses its own flags so set it there as well to get
the same behavior as with the rest of the code base.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Fix various unit test build warnings, unused variables, set but unused
variables, wrong types etc...
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Undefine the DT_NODE_HAS_STATUS and DT_NODE_HAS_STATUS_OKAY no nop at
the end of the file so other uses can include devicetree.h without
generating a compiler warning.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
