Add Devicetree overlay for sample drivers/led/pwm and fix the one in
basic/blinky_pwm for nucleo_l4r5zi board to set appropriate to enable
pwdleds and set appropriate timer prescaler.
Signed-off-by: Yishai Jaffe <yishai1999@gmail.com>
The Adafruit QT Py ESP32-S3 needs to have GPIO hogs enabled in order to
use the onboard RBG LED with the led_strip sample code.
Signed-off-by: Ian Wakely <raveious.irw@gmail.com>
For the latest upstream, if MBEDTLS_ENABLE_HEAP is not enabled, it will
default select MBEDTLS_PSA_STATIC_KEY_SLOTS, and consume extra SRAM for
about 35KB. Therefore, default enable MBEDTLS_ENABLE_HEAP.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Remove CONFIG_HEAP_MEM_POOL_SIZE for RW612, it will use
HEAP_MEM_POOL_ADD_SIZE_ way to add all module's heap size
together, to better control heap size for different case.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
uart_irq_update() should always be called in IRQ processing callback.
From API documentation:
"This function should be called the first thing in the ISR. Calling
uart_irq_rx_ready(), uart_irq_tx_ready(), uart_irq_tx_complete()
allowed only after this."
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Do hflipping at camera level to avoid using PxP which impacts camera
framerates on RT10xx. Moreover, on RT11xx, PxP is already reserved
for 90 CCW image rotation.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Add an option to mirror the video image horizontally. This helps
to avoid doing so at the post-processing step by using additional
HW such as PxP on i.MX RT platforms.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Make APP_CPU board name auto generated and remove the related config.
Remove the boards overlay and replace with a socs overlays.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Separate wifi example user config file to wifi network configurations
and hostap configurations.
User can set EXTRA_CONF_FILE as overlay-hostap.conf file to get
external hostap support.
Without overlay-hostap.conf, we will have embedded hostap.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
Testcase uses certificates from the sample application at
samples/net/sockets/http_server. These were modified and moved into a
different folder by a previous commit, causing a build failure in the
test.
Testcase updated to:
- use new path to certificates
- update available cipher suites, since certificates now use ECDSA
- update expected hostname in certificate
The CA certificate in the sample app is also converted to .der format
for inclusion in the test (the content is exactly the same as the PEM
version, just converted to DER).
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
MONOLITHIC_NXP_NBU cannot be used in CI as it relies on firmware blobs
to be fetched.
Disabling the feature so the CI can pass.
Also tagging this test as build_only.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This PR fixes a blocking call to video_buffer_alloc in case of memory
shortage by addign a timeout parameter to the API.
Signed-off-by: Armin Kessler <ake@espros.com>
MONOLITHIC_NXP_NBU cannot be used in CI as it relies on firmware blobs
to be fetched.
Disabling the feature so the CI can pass.
Also tagging this test as build_only.
Signed-off-by: Axel Le Bourhis <axel.lebourhis@nxp.com>
Using HTTP/2 to communicate with the sample application using a web
browser requires some additional steps. Add documentation describing
this to the sample README file.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Add application level Kconfig option to enable ALPN usage for
negotiating HTTP/2 connection with web browsers.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Existing cipher suites and certificates used by HTTP server sample are
included in RFC9113 Appendix A: Prohibited TLS 1.2 Cipher Suites. The
RFC specifies that when using HTTP/2, these cipher suites may be treated
as an error of type INADEQUATE_SECURITY, and in practice it seems that
Chrome and Firefox do implement this.
The certificates have been updated to use ECDSA-P265 signatures, and
supported cipher suites updated to include ECDH key exchange and AES GCM
and CCM modes.
Some scripts are included to allow users to generate their own
certificates if desired.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Remove the CONFIG_NET_SAMPLE_CERTS_WITH_SC option and make the CA-signed
certificate the only option - there is no real downside to this over
using the unsigned certificate.
Remove adding of CA certificate as a TLS credential on the server, since
this credential is not used by the server. It may be useful to include
in any client code used to communicate with the server, so the
certificate itself is retained.
After this, some TLS tag enumerations are unused so have been removed.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Several tests were using K_FOREVER when allocating the
buffer for TX in the system workqueue, which is illegal behavior.
The solution chosen was to create a TX thread to handle TX,
similar to the solution used in the audio shell and some
sample applications.
This way we can continue to use K_FOREVER when allocting buffers
and it will always be done in a round-robin fashion while
TXing as much as possible, by always enqueuing all the buffers
with mock data.
Since this works for all streams (both broadcast and unicast),
it was obvious to use the same implementation for all tests,
and thus cleaning up the tests a bit and more them more similar.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Combine BLE and 802.15.4 monolithic build under a single config to make
it less error prone.
The choice between a BLE/802.15.4 combo firmware and a BLE only firmware
is done depending on the Soc (like RW610 vs RW612).
Signed-off-by: Axel Le Bourhis <axel.lebourhis@nxp.com>
Commit 55d9d1c6ba
("samples: led: consolidate LED samples under same directory")
moved the led_strip sample from samples/drivers to samples/drivers/led.
But commit f54a53b4b3
("drivers: ws2812_gpio: Make timing configurable and less hardware
dependend") was merged at the same time and added the bbc_microbit.conf
file to the old location.
This patch moves bbc_microbit.conf to its correct location.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
If/when "zephry,entropy" is enabled CONFIG_ENTROPY_GENRATOR is
automatically enabled, therefore enabling the corresponding
platform entropy driver. On some platform this is a problem
because the entropy driver is not used directly as random
source, but only to seed the ctr-drbg algorithm provided
by Mbed TLS. Unfortunately CONFIG_MBEDTLS_CIPHER_MODE_CTR_ENABLED
cannot be directly enabled because CONFIG_MBEDTLS_CFG_FILE used
in mcuboot is different from the "config-tls-generic.h" which
is required to use Kconfig symbols defined in
"zephyr/modules/mbedtls/Kconfig.tls-generic".
Moreover entropy and random number generators are not required
in mcuboot because signature verification is a
deterministic operation.
In conclusion this commit disables "zephyr,entropy" in
mcuboot DTS overlay file.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
ENTROPY_GENERATOR is now automatically enabled if the board
has "zephyr,entropy" chosen property set, so there is no need
to manually select it.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Refactor the function to use net_buf_pull_mem instead of the
offset variable when decoding.
Since the offset value was always 0 before, this fixes the
incorrect decoding.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
It is no longer needed to enable a specific flash driver in the sample
configuration. An appropriate driver (together with its dependecies,
like the SPI bus) for a given target will be enabled automatically
based on what is enabled in DTS.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
It is no longer needed to enable a specific flash driver in the sample
configuration. An appropriate driver (together with its dependencies,
like the SPI bus) for a given target will be enabled automatically
based on what is enabled in DTS.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Correct "zephyr,sram" property under /chosen node to make board and samples
compatible with new SoC memory description.
Signed-off-by: Marcio Ribeiro <marcio.ribeiro@espressif.com>
Use the broadcast sink callbacks to set the semaphores
rather than the stream callbacks, as the broadcast sink callbacks
are better for that as they are called when all streams are ready.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use the broadcast source callbacks to set the semaphores
rather than the stream callbacks, as the broadcast source callbacks
are better for that as they are called when all streams are ready.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add set the parameter `type` to value
`BT_SDP_DISCOVER_SERVICE_SEARCH_ATTR`.
Update the SDP discovery callback function by adding a third parameter
`const struct bt_sdp_discover_params *params`. Make it align with
`bt_sdp_discover_func_t`.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Deprecate mode which is using TIMER+(D)PPI for reliable byte counting.
Recently a new approach is added (CONFIG_UART_NRFX_UARTE_ENHANCED_RX)
which supports reliable byte counting without additional HW resource.
This mode is planned to be the only supported RX path mode.
Enhanced RX has slightly different behavior. There are no partial RX
packets (events with non-zero offset). There is UART_RX_BUF_RELEASED
after each UART_RX_RDY event.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
This sample enables and configures the MCO1/2 output
for stm32 target boards.
MCO_PRE_DIV_n is defined by the stm32XX_clock.h
Signed-off-by: Francois Ramu <francois.ramu@st.com>
