This sample crates a touchscreen desk calculator based on
the sample state machine in _Practical UML Statecharts in
C/C++_ by Miro Samek.
Sample should build and run on any touchscreen-enabled
board with sufficient resources.
Tested on `disco_l475_iot1` board with
`adafruit_2_8_tft_touch_v2` touchscreen.
Signed-off-by: Glenn Andrews <glenn.andrews.42@gmail.com>
PXP can flip image written to the frame buffer. Provide a mirror image
on the display by flipping the camera image horizontally. Enabled on
boards mimxrt1066_evk and mimxrt1060_evkb.
Signed-off-by: Derek Snell <derek.snell@nxp.com>
Add support for testing IPC between cpuapp<>cpuflpr. Some adjustments
have been done to be able to support two different remote targets for
the nrf54h20dk cpuapp.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Wi-Fi sample is stack heavy, so, by default increase the stack sizes to
work with any driver, esp. those use WPA supplicant like nRF Wi-Fi.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Wi-Fi shell prints scan results to the console taking time and this puts
pressure on net_mgmt Queue, so, increase both timeout and Queue depth to
handle crowded Wi-Fi channel (~200 APs).
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Added a sample application demonstrating how to use the coap_client API
to download a resource via GET request.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Clean up before deprecating legacy device support.
The Linux kernel driver for this example has never been upstreamed or
implemented upstream. In general, 15.4 development does not seem to be a
big success, but if it comes up again, the protocol used by the example
will need to be redesigned anyway.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Clean up before deprecating legacy device support. This sample does not
contain anything special that is not present in the hid-mouse or
hid-keyboard samples. It also makes no sense to port it to a new stack.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Clean up before deprecating legacy device support. Remove
cdc_acm_composite sample, which is not much different than cdc_acm, but
uses two virtual UART interfaces.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Clean up before deprecating legacy device support. Remove configuration
overlay for DFU and MSC, which does not add much value since we have
dedicated samples anyway.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
"Video subsystem for Zephyr" is actually only defined as a driver
and the examples actually include <zephyr/drivers/video.h>.
Signed-off-by: Josuah Demangeon <me@josuah.net>
Enable the Software Watchdog Timer instance on this board.
Now that SWT is enabled for this board and made the default watchdog,
sample.task_wdt.no_hw_fallback can be removed as is no longer needed.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
The commit fixes soc_flash_nrf sample documentation where incorrect
partition names has been used and removes information of
CONFIG_TRUSTED_EXECUTION_NONSECURE affecting which partition is used
as this is no longer true.
The printf message reporting start of sample has been modified
to print "Nordic nRF5 Flash Sample" instead of
"Nordic nRF5 Flash Testing", which is more accurate for code
residing in samples.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This has been renamed in b6ed4ba761, the current entry is causing a CI
breakage for unrecognized platform.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add acmp pinctrl configuration to support ACMP driver for NXP frdm_ke17z
and frdm_ke17z512, tested 'sample.sensor.mcux_acmp' case.
Update the index.rst to add acmp description for ke17z.
Signed-off-by: Anke Xiao <anke.xiao@nxp.com>
Some boards claim `sdhc` support but use the `zephyr,mmc-disk`
instead of `zephyr,sdmmc-disk` compatible, with the former not being
compatible with this sample.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Move the check for valid disk drivers to compile time to enable twister
to run the configure step without errors.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Remove HTS221 sensor support from sensortile_box_pro as it has been ruled
out from final version. In fact, HTS221 is in the process of being
terminated and is not recommended for new design. The candidate replacement
is SHT40 from Sensirion, which is available also as a DIL24 adapter, which
can be plugged on sensortile_box_pro board.
See SENSEVAL-SHT4XV1:
https://www.st.com/en/partner-products-and-services/senseval-sht4xv1.html
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The documentation does not provide any guides on how to configure
the MCO pin, and responsebility is given to the application.
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
Rename usbd_device_set_bcd() to usbd_device_set_bcd_usb() to make room for
other BCD encoded values being set.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
In the sample, print the jesd216_bfp_density is expressed
in bits. add the unit to avoid confusion with the Flash
density expressed in bytes (dw2 entry)
Page size is for programming expressed in bytes, meaning
program execution on bytes basis or here page basis.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add the configuration with a board overlay to execute
the samples/subsys/task_wdt on the nucleo_f091rc
Adjust the window-watchdog clock to PASS the test.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add broadcast support to the CAP initiator sample.
This adds new sample-specific Kconfig options to help
select the right Kconfig options based on whether
unicast, broadcast or both is being used.
This also moves common TX functionality
to cap_initiator_tx to reuse the same TX thread
and functionality.
Finally there is a babblesim implemented for
the broadcast. There is not broadcast support for the
CAP acceptor sample yet, so this test only verifies that we
get the TX complete events from the controller.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a void *user_data pointer to the input callback structure. This is
useful for driver to get back the driver data structure and avoid
defining wrapper functions.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Appropriately setting the `--target` flag is necessary when using clang
and building for a target other than the default. Zephyr generally
accomplishes this by setting the CMAKE_<LANG>_COMPILER_TARGET variables and
allowing cmake to automatically provide the `--target` flag when building.
For the external_lib sample, however, cmake can't add the flag and it was
not otherwise exported. As such, clang typically threw errors when building
this sample for any non-default targets due to mismatches between
target-specific flags and the default target.
To fix this, ensure we select the correct target by checking if
CMAKE_C_COMPILER_TARGET has been defined and adding
`--target=<triple>` to the list of flags that are exported if so.
Signed-off-by: Jonathon Penix <jpenix@quicinc.com>
This commit adds a brief thread b suspend while the sample sets its
affinity mask.
If the call to `k_thread_cpu_pin` is being made while the thread is
actively running, then we get `-EINVAL` and the affinity mask is left
unchanged.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
The button sample is really a gpio interrupt sample, one may easily miss
the debounced driver and think it's not provided.
Add a note in the basic button sample documentation to refer to the
input subsystem doc and sample.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
twister expects regex print from logging used in the sample. Sample
is using minimal logging which does not protect against logs being
interleaved if printed from various contexts. Minimal logging is
just mapping of logging API to printk. Add CONFIG_PRINTK_SYNC to
ensure that printing of each log is synchronous (with lock) and
logs are never interleaved.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Now that flash controller driver is supported on M4 of stm32h745i_disco,
remove it from platform_exclude list and add an overlay for flash_shell
sample.
Signed-off-by: Murali Karicheri <murali.karicheri@sandc.com>
Now that flash controller driver is supported on M4 of stm32h747i_disco,
remove it from platform_exclude list and add an overlay for flash_shell
sample
Signed-off-by: Murali Karicheri <murali.karicheri@sandc.com>
Introduce UDC_BUF_POOL_*_DEFINE macros based on NET_BUF_POOL_*_DEFINE
macros but use our own version of alloc and unref callbacks to get
buffers with specific alignment and granularity. Also, do not use ref
callback because it breaks alignment.
Also introduces helper macros for defining and checking UDC
driver-compliant static buffers.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The accel_polling sample uses various sensor, but doesn't set a sampling
rate. But some sensors (like st,lsm6dso) have a default sampling
frequency of 0. So, depending on the sensor, the sample may not always
work.
There are two ways to fix this: either all drivers must set a valid
sampling rate, or the sample shall at least try to set a value if there
is none.
We propose here the second approach, wich should allow the sample to
work on more sensors out of the box.
Signed-off-by: Miguel Gazquez <miguel.gazquez@bootlin.com>
Added i2c configuration to test target_eeprom case for frdm_ke17z
Added `sample.drivers.i2c.target.kinetis` in sample.yaml for frdm_ke17z
and frdm_ke17z512 automatically run the tests
Signed-off-by: Anke Xiao <anke.xiao@nxp.com>
