Added initial CCP client implementation that simply
does discovery of TBS on a remote CCP server.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remove the HCI command & event emulation layer for ECDH commands and
events. This means that we always do the necessary operations in the host.
The existing BT_ECC Kconfig option stays, but now gets automatically
enabled when necessary (e.g. based on the BT_SMP option), which is why this
commit removes so many explicit assignments in prj.conf files.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
The CCP API for the Call Control Profile works on top of the
TBS API, and will eventually replace parts of the TBS API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added a test for disabled logging and for diabled testing
to ensure that the shell builds without error when those
are disbaled.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Convert qspi and hyperflash to variants instead of revisions by popular
demand.
And convert evkb into a revision instead of a different board.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Since now Mbed TLS automatically selects ENTROPY_GENERATOR (or the
test generator, depending on the platform) we can remove this dependency
from all BT related tests and samples.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
ENTROPY_GENERATOR is now automatically enabled if the board
has "zephyr,entropy" chosen property set, so there is no need
to manually select it.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Deprecate BT_CTLR, and add a new HAS_BT_CTLR as a virtual option which
specific users (like BT_LL_SW_SPLIT) select. This also means that we can
remove all places that were forcefully enabling the BT_CTLR option, and
instead we now depend on devicetree to get some local LL HCI driver
enabled which in turn also enables the HAS_BT_CTLR option.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Moving from TinyCrypt to PSA Crypto API caused an entropy source
to be always required, so this commit adds it in tests where
necessary.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This commit sets PSA Crypto API as the default library to perform
ECC-DH in HCI, replacing TinyCrypt (which is being deprecated).
Therefore the symbol BT_TINYCRYPT_ECC is renamed as BT_SEND_ECC_EMULATION.
References in samples/tests are also fixed.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Change the select of BT_PER_ADV_SYNC and BT_EXT_ADV to
depends on. This is an effort to reduce the use of
select for Kconfig options.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modify ASCS and BAP Broadcast sink to depend on the PAC options
instead of selecting them.
Since Kconfig does not support "depends on X if Y",
a select for PAC_{SRC,SNK} is used depending on
ASCS_ASE_{SRC,SNK}.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The BAP Kconfigs option now depends on
BT_ISO_BROADCASTER instead of selecting it.
This is an effort to reduce the use of select in LE Audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The BAP_BROADCAST_SOURCE Kconfig option now depends on
BT_ISO_BROADCASTER instead of selecting it.
This is an effort to reduce the use of select in LE Audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modify the Kconfig options to depend on the GATT
features rather than selecting them.
This is part of an effort to reduce the amount of
selects we use in LE Audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This ensures that enabling BT_CTLR_DTM does not break the compilation of
the Bluetooth shell.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Changed dependency of the BT_BAP_SCAN_DELEGATOR to GATT_DYNAMIC_DB
from 'select' to 'depends on' and solved all loop dependencies
caused by this change.
Fixes#79108
Signed-off-by: Babak Arisian <bbaa@demant.com>
The host-based adv auto-resume function has both a problematic
implementation and disagreement in the community around how it should
behave. See the issue linked resolved below for details.
This patch makes the deprecation visible to the user. The user will be
better served by a auto-resume tailored their applications use case,
based on more primitive host API like `conn_cb.recycled`, which has
obvious behavior that is unlikely to change.
Resolves: https://github.com/zephyrproject-rtos/zephyr/issues/72567
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Disable CDC ACM logging in configuraton overlay used in test case
bluetooth.shell.cdc_acm.
The build warning was introduced by the commit e8c4867806
("usb: cdc_acm: disable logging if used for shell with logging")
to preven recursive logging when using the CDC ACM UART as shell or
logging backend
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Makes it easier to make sure the CS test code is removed if desired.
It should hopefully allow for a clean split in general.
Signed-off-by: Olivier Lesage <olivier.lesage@nordicsemi.no>
native_posix is now deprecated.
Building this sample in both native_sim and native_posix does not
improve coverage for the sample or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for this sample.
Also let's remove a few redundant test platform filters
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
BAP mandates support for bondable mode for all central and
peripheral roles.
Due to Kconfig circular dependencies, some additional
Kconfig changes had to be made.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Any places that checked for GTBS is now always enabled
as GTBS is mandatory to support, and the Kconfig option
was removed.
Also removed a duplicate Kconfig option for TBS,
BT_TBS_SERVICE_COUNT, as it was unused.
The other Kconfig option BT_TBS_BEARER_COUNT is used
instead exclusively to set it if needed.
Since GTBS can now exist alone, it must also
support having its own calls and other values.
This means that the GTBS and TBS instances now share
the same underlying struct.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use a new file and command for this where all CS commands
can live.
Added support for bt_cs_set_default_settings command.
Added test case where shell is built with CS to ensure code
is built in CI.
Signed-off-by: Sean Madigan <sean.madigan@nordicsemi.no>
Added option to set the ASE count through the bap API, making ASE
configuration runtime available. The upper limit of ASEs are still
bound by the Kconfig options set for ASEs.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Path loss monitoring was not being enabled anywhere, meaning
that issues could be merged in without catching the issue.
This commit adds a test case to build the shell with path
loss monitoring enabled to catch issues.
Signed-off-by: Sean Madigan <sean.madigan@nordicsemi.no>
A few tests were only allowed for native_posix, but we are
deprecating it. Let's switch them to native_sim instead.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add commands to allow requesting a subrate change via the BT shell.
A new build configuration has been added to ensure this is tested in CI.
Signed-off-by: Aleksandar Stanoev <aleksandar.stanoev@nordicsemi.no>
Enable sysbuild for nRF5340 app core.
This automatically builds the image for the network core, making a
better user experience.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Following changes in HCI drivers
(https://github.com/zephyrproject-rtos/zephyr/pull/72323) the build for
the snippet allowing to have the Bluetooth shell run with BabbleSim was
broken.
Fix the snippet by disabling the HCI UART driver.
Add a twister test case that will build the snippet in CI to avoid
silent breaking.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Some bluetooth test were using BT_TINYCRYPT_ECC without also
setting BT_ECC. This means that BT_TINYCRYPT_ECC gets disabled
as it depends on BT_ECC.
This commit fix this by removing BT_TINYCRYPT_ECC in all test
for bluetooth mesh.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Update references to devicetree chosen properties and how devicetree nodes
should be defined in order to enable the new HCI drivers.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Add missing configuration files for the nRF5340DK
and missing configuration values for the unicast
samples w.r.t. buffer sizes and encryption.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When CONFIG_USB_DEVICE_STACK=n then the sine wave
generator was enabled, which caused build errors.
This commit fixes those errors and also adds the
nRF5340 as a build target for the USB tests.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Do not enable BT_HAS_PRESET_CONTROL_POINT_NOTIFIABLE as it
depends on EATT which isn't enabled.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When calling bap_broadcast_assistant add_pa_sync, it should only
set the BIS index field as optional parameters and not to whatever
is in the BASE.
If setting BIS index which the BASE does not support, then the
command should be rejected.
This PR fixes https://github.com/zephyrproject-rtos/zephyr/issues/70835
Signed-off-by: Ping Wang <pinw@demant.com>
The commit adds support for LESC in the host if the controller
does not support the public key generation for ECDH.
Signed-off-by: Ping Wang <pinw@demant.com>
When in the BAP unicast server role, at least PAC sink
or PAC source shall be set.
In order to fulfill this new requirement, a few other Kconfig
options had to be changed to a `depends on` from `select` to
avoid recursive Kconfig requirements. This change may require
some applications to update their configurations according
to the migration guide.
The change from `select` to `depends on` is ideal anyhow
as that is the recommended way to add dependencies.
This can checked via the combined BT_PACS Kconfig value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add USB out support for the BAP shell, so that decoded LC3
data can be sent to the host (e.g. a PC).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Improve the default serial backend init level.
The documentation says to be bigger than the init level of the serial
device used. Since serial devices default to the kernel device init
level (50) then put this to default of application level drivers (90).
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
The advertiser options to automatically add the name in the scan
response and the advertising data will be deprecated.
Update the tests that were relying on those options. A lot of test were
actually not using the name, for those the name have simply been
removed. For the others that were using the name, add it in the
advertising data or the scan response data.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
This is useful if we want to paste a list of multiple command or add
long advertising data for example.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
