Adds API for Advertising Coding Selection.
Introduces two new advertising options to configure the advertiser's
requirement concerning coding scheme when LE Coded PHY is configured.
While the Bluetooth v6.0 specification makes a distinction betweeen
preferred and required advertising PHY options, a simplification is
made to only expose the required PHY options. Inline with how LE Coded
PHY is implemented; this API will set both the primary and secondary
advertising PHY's to the same coding scheme.
The support is enabled by CONFIG_BT_EXT_ADV_CODING_SELECTION, and requires
a controller that selects CONFIG_BT_CTLR_ADV_EXT_CODING_SELECTION_SUPPORT.
Signed-off-by: Thomas Deppe <thomas.deppe@nordicsemi.no>
This adds the configuration used when running PTS tests with hci_ipc to
the testcase.yaml, so they are built on integration by CI, avoiding
regression.
Signed-off-by: Ludvig Jordet <ludvig.jordet@nordicsemi.no>
Added initial CCP client implementation that simply
does discovery of TBS on a remote CCP server.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Bring the change that was already in place for the qemu_cortex_m3 board
to all the other ones, since also nrf52840 had a similar problem
(see issue #82812).
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Make sure MTU is validated to avoid reading pass command buffer.
Also make more explicit check in response length validation.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This may cause some compiler warnings due to flexible array being
used in btp_hdr. Simply avoid it and do explicit pointer type cast
where needed.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Remove the HCI command & event emulation layer for ECDH commands and
events. This means that we always do the necessary operations in the host.
The existing BT_ECC Kconfig option stays, but now gets automatically
enabled when necessary (e.g. based on the BT_SMP option), which is why this
commit removes so many explicit assignments in prj.conf files.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
The connection event at the connection update instant was
skipped due to previous ticker node in use that is being
stopped was registering a relative occupied time that
overlapped with the new ticker node being started for
scheduling the connection with new interval.
Added mock interface for ticker_stop_abs() hence needed by
the Controller unit testing.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Instead of having 2 separate and non-equal checks for
capabilities in ASCS and the Broadcast Sink, there is now
a single function in pacs.c that performs the
check.
This reduces code size and makes it easier to maintain.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
MESH PTS tests require different number of keys, as an example; only
one netkey requires 8 key slots and there are test cases that use at
least two netkeys which consume the default 16 slots, so it is better
to have enough slots all times. Setting slot count to 32.
Signed-off-by: alperen sener <alperen.sener@nordicsemi.no>
Commit:
- adds dependency of the mbedtls psa usage on secure storage
- removes PSA ITS emulator and enables usage of
the secure storage in ble mesh bsim tests
- enables secure storage in all ble mesh and related samples
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Both the TMAP kconfig file and public header file defined
which roles were supported.
The Kconfig file options were recently added and were more
up to date (and correct), and allows for other Kconfig files
to use these values, thus allowing for more flexibility when
implementing applications.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The CCP API for the Call Control Profile works on top of the
TBS API, and will eventually replace parts of the TBS API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added a test for disabled logging and for diabled testing
to ensure that the shell builds without error when those
are disbaled.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add additional data to the logs and only send the event once we have
receive a successful SDU.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The range of BT_BAP_BROADCAST_SNK_SUBGROUP_COUNT should be relative to
BT_BAP_BASS_MAX_SUBGROUPS. The broadcast sink depends on the scan
delegator, and thus it does not make sense for the broadcast sink
to support more subgroups than what the scan delegator supports.
Since this no longer relates to the number of streams, there
may be new runtime errors if applications attempt
to sync to more subgroups than the number of ISO channels
supported.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Convert qspi and hyperflash to variants instead of revisions by popular
demand.
And convert evkb into a revision instead of a different board.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Since now Mbed TLS automatically selects ENTROPY_GENERATOR (or the
test generator, depending on the platform) we can remove this dependency
from all BT related tests and samples.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
There is an unused variable, which may result in a compiler warning.
Since we can not guarantee the value of this variable
we can not test for it, so it is removed.
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Instead of relying on the bap_send_cmd and a ring buffer,
the tester will now automatically start transmitting on
streams can that transmit once they enter the streaming state,
and stop again once once they leave the streaming state.
This ensures that we are always sending, which help pass
the PTS tests that require us to send, without having the
autopts client constant telling the tester to send.
This also ensures that we actually send SDUs of the right size
by not relying on a ring buffer, but using a separate thread
that sends data from a predefined array of ISO mock data.
This is easily expandable to multiple streams (including a mix
of unicast and broadcast) using different SDU sizes and easy to
expand to also use one or more software codecs.
The design is based on the TX thread for the BAP Unicast
Client sample and the audio babblesim tests.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix various unit test build warnings, unused variables, set but unused
variables, wrong types etc...
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
These are currently failing CI and don't really have a maintainer or
someone who'd fully understand how they're supposed to work. Let's remove
them for now and longer term work on reintroducing them in a form that's
maintainable and understood by people actively developing the Bluetooth
host stack.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Currently, there are build warnings that are triggered when building
for BT central and legacy OOB pairing only:
CONFIG_BT_SMP_OOB_LEGACY_PAIR_ONLY=y
CONFIG_BT_CENTRAL=y
There was a PR that handled this issue in the past https://github.com/zephyrproject-rtos/zephyr/pull/74400.
Unfortunately, this PR even though it fixed the warnings it also
broke the BT peripheral and legacy OOB pairing only build:
CONFIG_BT_SMP_OOB_LEGACY_PAIR_ONLY=y
CONFIG_BT_PERIPHERAL=y
https://github.com/zephyrproject-rtos/zephyr/pull/82552 was merged in
order to fix the issue with the peripheral build configuration.
Unfortunately, this PR reintroduced the warnings for BT central and
legacy OOB pairing.
This commit brings changes to make sure that both the BT central and
peripheral builds with OOB legacy pairing are buildable and
warnings free.
Also in this commit, a new build test case is added for the BT central
and legacy OOB pairing along the existing BT peripheral test case
Signed-off-by: Sebastian Panceac <sebastian.panceac@ext.grandcentrix.net>
Modify the extended and periodic interval to be values that
are more suited for audio as they are multiple
of the expected resulting ISO interval.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
[Description]
PTS case: VCS/SR/SGGIT/CHA/BV-03-C fail.
[Root Cause]
VCS/SR/SGGIT/CHA/BV-03-C require Volume Flags Characteristic properties
(Read/Notify), but tester volume flags notify is disabled by default.
[Fix]
add CONFIG_BT_VCP_VOL_REND_VOL_FLAGS_NOTIFIABLE=y in
tests/bluetooth/tester/overlay-le-audio.conf
[Testing]
After modified, VCS/SR/SGGIT/CHA/BV-03-C pass with log:
Test Case Ended VCS/SR/SGGIT/CHA/BV-03-C PASS 24 00:00:01.010000
12/9/2024 11:31:55.027000 AM
Signed-off-by: Chang An <chang.an_1@nxp.com>
Combine BLE and 802.15.4 monolithic build under a single config to make
it less error prone.
The choice between a BLE/802.15.4 combo firmware and a BLE only firmware
is done depending on the Soc (like RW610 vs RW612).
Signed-off-by: Axel Le Bourhis <axel.lebourhis@nxp.com>
This commit adds a unit test that checks the freed buffer callback of
the bluetooth data buffer API.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
ENTROPY_GENERATOR is now automatically enabled if the board
has "zephyr,entropy" chosen property set, so there is no need
to manually select it.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
There is a unittest to verify that the distribute broadcast code procedure
is not called with the same peer twice. This test requires a minimum
of two connections, so we disable this test when only 1 connection
can be made
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Some of the unittests had an incorrect project name in the
CMakeList.txt file
This is corrected here
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
The new `host_config_variants` goal is to be able to test specific set
of configurations when building the Host without the need of having a
specific application for it.
The first test check that the Host build correctly with
`CONFIG_BT_SMP_OOB_LEGACY_PAIR_ONLY` enabled.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Sets CONFIG_LOG_BACKEND_RTT_MESSAGE_SIZE=256 as some log
messages are longer than 128 (default) and may be truncated
with the existing configuration and implementation.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
These callbacks are trigger for changes that affect the entire
broadcast source, such as the BIG started and terminated events.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
These callbacks are trigger for changes that affect the entire
broadcast source, such as the BIG started and terminated events.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
- Add NULL checks for broadcast_source_stop
- Add NULL checks for broadcast_source_release
- Return -ESRCH if trying to stop ext_adv before creation
Signed-off-by: Alexander Svensen <alexander.svensen@nordicsemi.no>
Added support for BAP 1.0.2, CSIS 1.01, PACS 1.0.2, PBP 1.0.1
Enabled support for extended adv in the LL (mandatory requirement)
Enabled support for multiple BIGs support in the LL.
Due to a bug in the BT qualification tool, the following
features are values in the .bqw file are manually added
<Feature>BAP 4/1</Feature>
<Feature>BAP 26/1</Feature>
<Feature>BAP 49/1</Feature>
<Feature>BAP 62/1</Feature>
<Feature>BAP 77/1</Feature>
<Feature>BAP 83/1</Feature>
<Feature>CSIP 3/1</Feature>
<Feature>CSIP 8/1</Feature>
<Feature>PBP 10/1</Feature>
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Default the Minimum encryption key size to 16.
Key with reduced size is easier to brut force.
Disable LE legacy pairing by default since it's not secure.
These defaults should suite majority of newly developed applications.
It's better to use sensible more secure defaults,
so applications that really need less secure option consciously change it,
not the other way around.
This may help to prevent downgrade attacks.
Signed-off-by: Sergey Korotkov <sergey.korotkov@nordicsemi.no>
Moving the blob client, dfd server and dfu server to their own
elements and increasing the CONFIG_BT_MESH_TX_SEG_MAX to 8 to fit
new composition data into composition data page status message.
Standalone mesh blob client and DFU distributor/update server models
requires one element and those elements only contain the main models
and the models they extend to.
Referring to MshMBT_v1.0 Section 6.1:
The BLOB Transfer Client model defines the messages listed in Table 6.1
, and requires one element: the BLOB Transfer Client Main element. The
BLOB Transfer Client Main element contains the BLOB Transfer Client
main model.
And referring to MshDFU_v1.0 Sections 6.1.1 and 6.2.1:
6.1.1
The Firmware Update Server model adds the state instances listed in
Table 6.1 and Table 6.2 and the messages listed in Table 6.3 to the
model it extends, and requires one element: the Firmware Update Main
element. The Firmware Update Main element contains the Firmware Update
Server main model and all the models that the main model extends.
6.2.1
The Firmware Distribution Server model adds the state instances listed
in Table 6.7 and Table 6.8 and the messages listed in Table 6.9 to the
model it extends, and requires one element: the Firmware Distribution
Main element. The Firmware Distribution Main element contains the
Firmware Distribution Server main model and all the models that the
main model extends.
Signed-off-by: alperen sener <alperen.sener@nordicsemi.no>
Deprecate BT_CTLR, and add a new HAS_BT_CTLR as a virtual option which
specific users (like BT_LL_SW_SPLIT) select. This also means that we can
remove all places that were forcefully enabling the BT_CTLR option, and
instead we now depend on devicetree to get some local LL HCI driver
enabled which in turn also enables the HAS_BT_CTLR option.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
