Removing the message buffer and printing out the message directly.
Creating a message buffer with the size of CONFIG_BT_L2CAP_TX_MTU
creates a large empty buffer, which is expensive for the stack and
can lead to a stack overflow.
This way, the sample can be more easily integrated with
other Bluetooth functionalities, such as Bluetooth OTA.
Signed-off-by: Carlo Weidinger <carlo.weidinger@protonmail.com>
Update the Central and Peripheral GATT write command sample
to measure throughput across all supported connection PHYs.
Cover the sample in BabbleSIM CI testing to validate the 2M
PHY throughput after all supported PHYs have been changed
once.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Modify the BAP Broadcast source sample to use the next USB stack.
For simplicity, the changes are minimum and will still do the
same downsampling, and thus use a fixed 48KHz audio input.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added initial CCP client implementation that simply
does discovery of TBS on a remote CCP server.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
We need to call `bt_le_adv_start()` again to make sure the device remains
connectable after a disconnection event. The appropriate place to do it is
in the `recycled()` callback.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Remove the HCI command & event emulation layer for ECDH commands and
events. This means that we always do the necessary operations in the host.
The existing BT_ECC Kconfig option stays, but now gets automatically
enabled when necessary (e.g. based on the BT_SMP option), which is why this
commit removes so many explicit assignments in prj.conf files.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Added option to set the PACS Characteristics through the bap API,
making PACS configuration runtime available. Source and Sink PAC, as
well as Source/Sink PAC Location is can be set through a register
function in the PACS api.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Commit:
- adds dependency of the mbedtls psa usage on secure storage
- removes PSA ITS emulator and enables usage of
the secure storage in ble mesh bsim tests
- enables secure storage in all ble mesh and related samples
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The CCP API for the Call Control Profile works on top of the
TBS API, and will eventually replace parts of the TBS API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The sample did not properly handle ending the broadcast and setting
it up for a new broadcast, due to missing wait for sem_big_term and
a bad check in iso_disconnected.
Furthermore if any did not work when setting up the BIG,
the error handling did not properly clean up for a retry.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
These are never meant to be run, so make sure it's explicitly specified
through the build_only property.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Add Silabs boards to the newly added test cases which exercise the
CONFIG_BUILD_ONLY_NO_BLOBS configuration option. Also fix the namespace to
be "peripheral" for the peripheral sample app.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Convert qspi and hyperflash to variants instead of revisions by popular
demand.
And convert evkb into a revision instead of a different board.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Since now Mbed TLS automatically selects ENTROPY_GENERATOR (or the
test generator, depending on the platform) we can remove this dependency
from all BT related tests and samples.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Add a new option to control led0 behavior. If enabled, led0 will be used
for blinking. This option also allows to select GPIO when needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a new Kconfig option to control the behavior of sw0. If enabled, sw0
button will be used for provisioning. This option also allows to select
GPIO.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a new Kconfig option to control the behavior of led0. This option
also allows to select GPIO only when needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Update central multilink sample to get version info to
verify actual data transmissions will succeed, and there is
no disconnect with reason connection fail to be established.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update central multilink sample to use continuous scanning
to speed up connection setup.
Update peripheral identity sample to be configurable for
bsim testing as multiple devices with configurable count
of supported connections.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The Bluetooth HCI USB transport layer implementation is provided by
"subsys/usb/device/class/bluetooth.c". The USB H4 Bluetooth function
implements a non-standard transport layer. There is no known host-side
equivalent that uses this protocol.
Note that the H4 protocol functionality is also provided by the
"subsys/usb/device/class/bluetooth.c".
Since that there are no real USB H4 Bluetooth users, remove the
implementation and sample without deprecation.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
uart_irq_update() should always be called in IRQ processing callback.
From API documentation:
"This function should be called the first thing in the ISR. Calling
uart_irq_rx_ready(), uart_irq_tx_ready(), uart_irq_tx_complete()
allowed only after this."
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Several tests were using K_FOREVER when allocating the
buffer for TX in the system workqueue, which is illegal behavior.
The solution chosen was to create a TX thread to handle TX,
similar to the solution used in the audio shell and some
sample applications.
This way we can continue to use K_FOREVER when allocting buffers
and it will always be done in a round-robin fashion while
TXing as much as possible, by always enqueuing all the buffers
with mock data.
Since this works for all streams (both broadcast and unicast),
it was obvious to use the same implementation for all tests,
and thus cleaning up the tests a bit and more them more similar.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Combine BLE and 802.15.4 monolithic build under a single config to make
it less error prone.
The choice between a BLE/802.15.4 combo firmware and a BLE only firmware
is done depending on the Soc (like RW610 vs RW612).
Signed-off-by: Axel Le Bourhis <axel.lebourhis@nxp.com>
ENTROPY_GENERATOR is now automatically enabled if the board
has "zephyr,entropy" chosen property set, so there is no need
to manually select it.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Refactor the function to use net_buf_pull_mem instead of the
offset variable when decoding.
Since the offset value was always 0 before, this fixes the
incorrect decoding.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use the broadcast sink callbacks to set the semaphores
rather than the stream callbacks, as the broadcast sink callbacks
are better for that as they are called when all streams are ready.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use the broadcast source callbacks to set the semaphores
rather than the stream callbacks, as the broadcast source callbacks
are better for that as they are called when all streams are ready.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add set the parameter `type` to value
`BT_SDP_DISCOVER_SERVICE_SEARCH_ATTR`.
Update the SDP discovery callback function by adding a third parameter
`const struct bt_sdp_discover_params *params`. Make it align with
`bt_sdp_discover_func_t`.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Convert them to native YAML lists. Support for space-separated
lists was deprecated in Twister a long time ago.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Default the Minimum encryption key size to 16.
Key with reduced size is easier to brut force.
Disable LE legacy pairing by default since it's not secure.
These defaults should suite majority of newly developed applications.
It's better to use sensible more secure defaults,
so applications that really need less secure option consciously change it,
not the other way around.
This may help to prevent downgrade attacks.
Signed-off-by: Sergey Korotkov <sergey.korotkov@nordicsemi.no>
Deprecate BT_CTLR, and add a new HAS_BT_CTLR as a virtual option which
specific users (like BT_LL_SW_SPLIT) select. This also means that we can
remove all places that were forcefully enabling the BT_CTLR option, and
instead we now depend on devicetree to get some local LL HCI driver
enabled which in turn also enables the HAS_BT_CTLR option.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
This reverts commit 184c0f9e9d.
Reducing system heap memory to 1024 caused runtime failures on some
platforms. This commit revert that change and return to the previous
size.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Moving from TinyCrypt to PSA Crypto API caused failures in the cpu_net
build due to RAM being overflowed. It turned out that 8192 bytes were
allocated for system heap memory, but Mbed TLS is the only user
of that memory (I found this though puncover) for AES purposes.
We reduce that to 1024 bytes because this should be enough for
this purpose.
Note: albeit this is also a standalone example, it's used extensively
in other samples/tests and babblesim, so a failure in building it
propagates in a lot of other failures.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Moving from TinyCrypt to PSA Crypto API caused an entropy source
to be always required, so this commit adds it in tests where
necessary.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
As part of the work of deprecating TinyCrypt in favor of
PSA crypto API, this commit fixes some kconfigs in order to
reduce the RAM footprint. In all involved samples RAM usage
was extremely high even with TinyCrypt (usually > 98%) and
of course it got overflowed once TinyCrypt got replaced by
Mbed TLS's PSA Crypto API.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This commit sets PSA Crypto API as the default library to perform
ECC-DH in HCI, replacing TinyCrypt (which is being deprecated).
Therefore the symbol BT_TINYCRYPT_ECC is renamed as BT_SEND_ECC_EMULATION.
References in samples/tests are also fixed.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
CONFIG_BT_USE_PSA_API was used in BT crypto/host modules to select
PSA crypto API over TinyCrypt (which was the default until now).
Since TinyCrypt is being deprecated and PSA crypto API is the new
standard library for crypto operations, CONFIG_BT_USE_PSA_API is
no more needed.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
