..
acsip
boards: arm: stm32: add pinctrl state name for SPI peripheral
2021-11-26 11:36:42 +01:00
atmel
drivers: hwinfo: sam: Introduce RSTC driver
2022-02-28 10:53:57 +01:00
broadcom
cypress
linker: Introduce zephyr,memory-region compatible
2022-02-21 22:02:04 -05:00
gigadevice
dts: gd32e103: add dac support.
2022-03-01 18:06:14 +01:00
infineon
microchip
drivers: bbram: Add bbram driver for mec device
2022-02-21 22:17:52 -05:00
nordic
bluetooth: hci: rpmsg: use ipc service library
2022-03-02 17:03:01 +01:00
nuvoton
soc: npcx: add support for npcx9m7f
2022-02-21 21:56:24 -05:00
nxp
dts: nxp: Add pinctrl dummy node for kinetis series MCUs
2022-03-03 13:00:20 -06:00
quicklogic
renesas /gen3
drivers: can: unify CAN controller configuration in devicetree
2022-02-24 13:48:55 -08:00
rpi_pico
drivers: gpio_rpi_pico: fix pull ups and disabling interrupts
2022-02-24 08:44:19 -06:00
seeed
dts/arm/seeed: lora-e5: Update hse clock configuration
2021-08-24 07:19:12 -04:00
silabs
boards: efr32mg_sltb004a: Add minimal pwm support
2021-09-03 10:11:15 -04:00
st
dts: arm: stm32l0 LSI clock freq is 37kHz
2022-03-01 11:51:54 +01:00
ti
linker: Introduce zephyr,memory-region compatible
2022-02-21 22:02:04 -05:00
xilinx
dts: arm: xilinx: zynqmp: add OCM memory area
2022-02-28 11:04:57 +01:00
armv6-m.dtsi
dts: arm: Add #address-cells to nvic nodes
2021-08-02 15:02:09 -04:00
armv7-a.dtsi
soc: arm: dts: arm: xilinx: Zynq-7000 SoC init code, device tree data
2021-10-28 15:26:50 +02:00
armv7-m.dtsi
dts: arm: Add #address-cells to nvic nodes
2021-08-02 15:02:09 -04:00
armv7-r.dtsi
armv8-m.dtsi
dts: arm: Add #address-cells to nvic nodes
2021-08-02 15:02:09 -04:00
armv8.1-m.dtsi
dts: arm: Add #address-cells to nvic nodes
2021-08-02 15:02:09 -04:00
5e300f2027