bartoszek/zephyr
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
ef964ca4e1
zephyr/samples/sensor/th02
History
Kumar Gala ef964ca4e1 samples: th02: simplify sample and use DEVICE_DT_GET_ONE 
Update sample to use DEVICE_DT_GET_ONE to remove usage of
device_get_binding.  Additionally simplfy the sample to
just access a single TH02 device.

Signed-off-by: Kumar Gala <galak@kernel.org>
2022-07-25 09:39:51 +02:00
..
boards samples: sensors: Remove label property from devicetree overlays 2022-07-19 08:23:35 -05:00
src samples: th02: simplify sample and use DEVICE_DT_GET_ONE 2022-07-25 09:39:51 +02:00
CMakeLists.txt
prj.conf
README.rst
sample.yaml samples: sensor: th02: add Grove LCD compatible to the filter 2022-02-22 11:58:33 -08:00

README.rst 

.. _th02-sample:

TH02: Temperature and Humidity Monitor
######################################

Overview
********
This sample periodically reads temperature and humidity from the Grove
Temperature & Humidity Sensor (TH02) and display the results on the Grove LCD
display.


Requirements
************

This sample uses the TH02 sensor and the grove LCD display. Both devices are
controlled using the I2C interface.

More details about the sensor and the display can be found here:

- `Grove Temperature And Humidity`_
- `Grove LCD Module`_

Wiring
******

The easiest way to get this wired is to use the Grove shield and connect both
devices to I2C. No additional wiring is required. Depending on the board you are
using you might need to connect two 10K ohm resistors to SDL and and SDA (I2C).
The LCD display requires 5 volts, so the voltage switch on the shield needs to
be on 5v.


References
**********

 - TH02: http://www.datasheetspdf.com/mobile/748107/TH02.html


.. _Grove LCD Module: http://wiki.seeed.cc/Grove-LCD_RGB_Backlight/
.. _Grove Temperature And Humidity: http://wiki.seeed.cc/Grove-TemptureAndHumidity_Sensor-High-Accuracy_AndMini-v1.0/