Tim Lin 76ced4a82d drivers: pinctrl: ITE: Add a property configure pin current strength ... Add the property of drive-strength to drive a high or low current selection. If this property is not configured, it is the default setting. According to the SPEC, the default drive current selection varies from different pins. Define the high level 0b: 8mA low level 1b: 4mA or 2mA Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>		2024-06-06 00:41:35 -07:00
..
renesas	boards: arm64: add support of Renesas Spider S4 A55 board	2024-04-25 14:54:51 +02:00
CMakeLists.txt	drivers: Add MAX32690 pinctrl driver	2024-05-29 07:30:12 +02:00
common.c
Kconfig	drivers: Add MAX32690 pinctrl driver	2024-05-29 07:30:12 +02:00
Kconfig.ambiq	drivers: pinctrl: Add pinctrl driver for Apollo3 SoCs	2024-05-07 18:57:19 +02:00
Kconfig.b91
Kconfig.cc13xx_cc26xx
Kconfig.emsdp
Kconfig.ene	drivers: pinctrl: initial device driver for ENE KB1200	2024-03-15 09:39:48 +00:00
Kconfig.eos_s3
Kconfig.esp32
Kconfig.gd32
Kconfig.gecko
Kconfig.ifx_cat1
Kconfig.imx	drivers: pinctrl: Kconfig.imx: enable PINCTRL_IMX by default	2024-04-09 11:06:14 +02:00
Kconfig.it8xxx2
Kconfig.kinetis
Kconfig.lpc_iocon
Kconfig.max32	drivers: Add MAX32690 pinctrl driver	2024-05-29 07:30:12 +02:00
Kconfig.mci_io_mux	dts: Rename RW pinctrl to MCI IO MUX	2024-03-22 08:56:10 +01:00
Kconfig.npcx
Kconfig.nrf
Kconfig.numaker
Kconfig.numicro
Kconfig.nxp_s32
Kconfig.rpi_pico
Kconfig.rv32m1
Kconfig.sam
Kconfig.sam0
Kconfig.sifive
Kconfig.stm32
Kconfig.ti_cc32xx
Kconfig.ti_k3
Kconfig.xec
Kconfig.xlnx	soc: xlnx: zynq7000: Select SYSCON in SoC config	2024-04-29 09:56:58 +01:00
Kconfig.xmc4xxx
Kconfig.zynqmp	drivers: pinctrl: Add ZynqMP / Mercury XU pinctrl support	2024-01-26 12:47:11 +01:00
pinctrl_ambiq.c	drivers: pinctrl: Add pinctrl driver for Apollo3 SoCs	2024-05-07 18:57:19 +02:00
pinctrl_b91.c
pinctrl_cc13xx_cc26xx.c
pinctrl_emsdp.c
pinctrl_ene_kb1200.c	drivers: pinctrl: initial device driver for ENE KB1200	2024-03-15 09:39:48 +00:00
pinctrl_eos_s3.c
pinctrl_esp32.c
pinctrl_gd32_af.c
pinctrl_gd32_afio.c
pinctrl_gecko.c	drivers: pinctrl: pinctrl_gecko: Add support for using pinctrl api	2024-04-25 18:07:48 -04:00
pinctrl_ifx_cat1.c	soc: psoc6: update pinctrl for PSoC6 MCU (legacy)	2024-06-04 16:35:39 +02:00
pinctrl_imx_scu.c
pinctrl_imx.c	nxp: imx8ulp: enable pinctrl	2024-04-09 11:06:14 +02:00
pinctrl_ite_it8xxx2.c	drivers: pinctrl: ITE: Add a property configure pin current strength	2024-06-06 00:41:35 -07:00
pinctrl_kinetis.c	drivers: pinctrl: Add support for more ports	2024-03-13 22:38:46 +00:00
pinctrl_lpc_iocon.c
pinctrl_max32.c	drivers: Add MAX32690 pinctrl driver	2024-05-29 07:30:12 +02:00
pinctrl_mchp_xec.c
pinctrl_mci_io_mux.c	dts: Rename RW pinctrl to MCI IO MUX	2024-03-22 08:56:10 +01:00
pinctrl_npcx.c
pinctrl_nrf.c	drivers: pinctrl: nrf: use CLOCKPIN for slow SPIM MOSI	2024-06-05 14:42:50 +01:00
pinctrl_numaker.c	drivers: pinctrl: support digital-path-disable for Numaker	2024-05-10 18:06:15 -04:00
pinctrl_numicro.c
pinctrl_nxp_s32.c
pinctrl_rpi_pico.c
pinctrl_rv32m1.c
pinctrl_sam0.c
pinctrl_sam.c
pinctrl_sifive.c	drivers: pinctrl: sifive: use DT ngpios property	2024-01-19 15:13:53 +00:00
pinctrl_stm32.c	pinctrl: stm32: add remap support for STM32C0	2024-05-07 15:19:23 -05:00
pinctrl_ti_cc32xx.c
pinctrl_ti_k3.c
pinctrl_xlnx_zynq.c
pinctrl_xlnx_zynqmp.c	drivers: pinctrl: Add ZynqMP / Mercury XU pinctrl support	2024-01-26 12:47:11 +01:00
pinctrl_xmc4xxx.c