Cong Nguyen Huu 40a27244f0 boards: s32z2xx: enable flash controller QSPI ... The on-board S26HS512T 512M-bit HyperFlash memory is connected to the QSPI controller port A1. This board configuration selects it as the default flash controller. Signed-off-by: Cong Nguyen Huu <cong.nguyenhuu@nxp.com>		2025-01-21 19:26:45 +01:00
..
acsip
adi/max32	soc: adi: Add the MAX78002 SoC	2024-11-16 15:09:57 -05:00
ambiq	dts: arm: ambiq: ap4 kxr rtc driver	2024-12-23 15:09:37 +01:00
antmicro	boards: antmicro: add support for the Myra SiP Baseboard	2025-01-20 20:55:37 +01:00
aspeed
atmel	dts: arm: atmel: samx7x: move SAM E70/V71 DMA header to dt-bindings	2025-01-14 22:54:33 +01:00
broadcom
ene
gd
infineon	drivers: dma: initial implementation CAT1 DMA driver	2025-01-10 14:48:24 +01:00
intel_socfpga_std
microchip	drivers: gpio: mec5: Microchip MEC5 HAL based GPIO driver	2024-12-23 17:11:22 +01:00
nordic	soc: nordic: nrf54l: Add nrf54l09 enga SoC	2025-01-08 19:10:24 +01:00
nuvoton	dts: arm: npcx: Add smb-wui prop. to support wake-up from sleep	2025-01-20 07:05:48 +01:00
nxp	boards: s32z2xx: enable flash controller QSPI	2025-01-21 19:26:45 +01:00
olimex
quicklogic
rakwireless	dts: arm: rakwireless: add RAK3172 LoRaWAN module	2024-11-28 20:52:54 +01:00
raspberrypi/rpi_pico	rpi_pico2: rp2350: Add DMA support	2024-12-23 23:57:57 +01:00
realtek/ec	driver: serial: Add UART driver initial version of RTS5912.	2025-01-10 11:58:02 +01:00
renesas	dts: bindings: gpio: use hyphens instead of underscore	2025-01-15 11:51:33 +01:00
seeed_studio
silabs	soc: silabs: Add support for xG29 device family	2025-01-20 16:34:50 +01:00
st	dts: arm: stm32 devices with xspi is named spi node	2025-01-17 19:43:06 +01:00
ti	soc: ti_k3: Add TI J722s SoC MCU R5	2025-01-16 22:35:57 +01:00
we	dts: arm: we: add Oceanus-I module device tree	2025-01-17 19:45:29 +01:00
xilinx
armv6-m.dtsi
armv7-a.dtsi
armv7-m.dtsi
armv7-r.dtsi
armv8-m.dtsi
armv8-r.dtsi
armv8.1-m.dtsi
cortex_r8_virt.dtsi	soc: renode: Add cortex_r8_virtual	2024-10-01 09:58:22 +02:00