77e1d4d710
In newer OpenOCD version from Zephyr's SDK v0.12, there are some changes in OpenOCD scripts: JTAG probe interface (AKA "adapter") setup, see http://openocd.zylin.com/#/c/5784/ And so we need to change OpenOCD scripts accordingly to match newer OpenOCD version from Zephyr's SDK v0.12. Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
25 lines
741 B
INI
25 lines
741 B
INI
# Configure JTAG cable
|
|
# EM Starter Kit has built-in FT2232 chip, which is similar to Digilent HS-1.
|
|
adapter driver ftdi
|
|
ftdi_vid_pid 0x0403 0x6010
|
|
# channel 1 does not have any functionality
|
|
ftdi_channel 0
|
|
# just TCK TDI TDO TMS, no reset
|
|
ftdi_layout_init 0x0088 0x008b
|
|
reset_config none
|
|
|
|
# Only specify FTDI serial number if it is specified via
|
|
# "set _ZEPHYR_BOARD_SERIAL 12345" before reading this script
|
|
if { [info exists _ZEPHYR_BOARD_SERIAL] } {
|
|
ftdi_serial $_ZEPHYR_BOARD_SERIAL
|
|
}
|
|
|
|
# EM11D reportedly requires 5 MHz. Other cores and board can work faster.
|
|
adapter speed 5000
|
|
|
|
# ARCs support only JTAG.
|
|
transport select jtag
|
|
|
|
# Configure FPGA. This script supports both LX45 and LX150.
|
|
source [find target/snps_em_sk_fpga.cfg]
|