Gerard Marull-Paretas 3b7215e160 drivers: serial: nrfx_uarte: add support for pinctrl ... This patch adds support for the new pinctrl API to the UARTE driver. The old pin property based solution is still kept so that users have time to transition to the new model. Notes: - Some build assertions cannot be performed since the driver does not have direct access to pin settings anymore. As a result user will not be notified if HWFC is enabled but RTS/CTS pins are not configured. - Hardware flow control can be enabled regardless of pin configuration, it is now up to the user to configure RTS/CTS pins in DT. - Some RX enable checks that were performed using pin information has been replaced with a DT property that informs if RX is enabled or not. Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>		2021-11-26 14:20:51 +01:00
..
altr,jtag-uart.yaml
arm,cmsdk-uart.yaml
arm,pl011.yaml
arm,sbsa-uart.yaml	drivers: pl011: add SBSA mode	2021-01-24 13:59:55 -05:00
atmel,sam0-uart.yaml	drivers: serial: uart_sam0: Add pinctrl support	2021-07-30 14:37:20 -05:00
atmel,sam-uart.yaml
atmel,sam-usart.yaml
cypress,psoc6-uart.yaml	drivers: serial: psoc6: Rework to support pinctrl	2021-04-27 09:27:45 -05:00
espressif,esp32-uart.yaml
gaisler,apbuart.yaml
gd,gd32-usart.yaml	drivers: serial: gd32 usart add interrupt support	2021-11-23 13:25:43 -05:00
infineon,xmc4xxx-uart.yaml
ite,it8xxx2-uart.yaml	ITE: drivers/serial: add the UART driver for the PM callback function	2021-11-16 21:23:42 -05:00
litex,uart0.yaml
microchip,xec-uart.yaml	Microchip: MEC172x: eSPI driver	2021-10-26 09:27:20 -04:00
microsemi,coreuart.yaml
neorv32-uart.yaml	drivers: serial: add neorv32 uart driver	2021-10-15 09:46:53 -04:00
nordic,nrf-uart-common.yaml	drivers: serial: nrfx_uarte: add support for pinctrl	2021-11-26 14:20:51 +01:00
nordic,nrf-uart.yaml	dts: bindings: improve documentation for Nordic IPs	2021-01-16 07:59:27 -06:00
nordic,nrf-uarte.yaml	dts: bindings: improve documentation for Nordic IPs	2021-01-16 07:59:27 -06:00
ns16550.yaml	drivers: uart: ns16550: Move all PCIe-using nodes to a PCIe bus in DTS	2021-01-18 15:45:58 -05:00
nuvoton,npcx-uart.yaml	dts: npcx: Fixed the name of nodes in device-tree files.	2021-04-08 16:35:20 +02:00
nuvoton,numicro-uart.yaml
nxp,imx-iuart.yaml	dts: bindings: serial: fix up multi-line strings	2021-06-14 21:49:57 -04:00
nxp,imx-uart.yaml
nxp,kinetis-lpsci.yaml	dts: bindings: nxp: Add pinctrl-0 as a required property	2021-05-04 13:03:00 -05:00
nxp,kinetis-lpuart.yaml
nxp,kinetis-uart.yaml	dts: bindings: nxp: Add pinctrl-0 as a required property	2021-05-04 13:03:00 -05:00
nxp,lpc11u6x-uart.yaml
nxp,lpc-usart.yaml
openisa,rv32m1-lpuart.yaml
renesas,rcar-scif.yaml	dts: bindings: serial: add Renesas R-Car SCIF	2021-05-07 13:08:48 +02:00
segger,rtt-uart.yaml
sifive,uart0.yaml
silabs,gecko-leuart.yaml
silabs,gecko-uart.yaml
silabs,gecko-usart.yaml
snps,nsim-uart.yaml
st,stm32-lpuart.yaml	dts/bindings: stm32: Set pinctrl-[0/names] properties as required	2021-11-26 11:36:42 +01:00
st,stm32-uart.yaml	dts/bindings: stm32: Set pinctrl-[0/names] properties as required	2021-11-26 11:36:42 +01:00
st,stm32-usart.yaml	dts/bindings: stm32: Set pinctrl-[0/names] properties as required	2021-11-26 11:36:42 +01:00
telink,b91-uart.yaml	dts: riscv: add basic dts support for new Telink B91 platform	2021-07-21 05:37:12 -04:00
ti,cc13xx-cc26xx-uart.yaml
ti,cc32xx-uart.yaml
ti,msp432p4xx-uart.yaml
ti,stellaris-uart.yaml
uart-controller.yaml	driver/uart: add enum parity element on devicetree bindings	2021-06-11 08:53:10 -05:00
uart-device.yaml
xlnx,xps-uartlite-1.00.a.yaml
xlnx,xuartps.yaml	dts: bindings: fix file names	2021-10-20 07:33:04 -04:00
zephyr,cdc-acm-uart.yaml	usb: cdc_acm: allow to configure CDC ACM UART device from devicetree	2021-08-23 18:53:47 -04:00
zephyr,native-posix-uart.yaml