..
acsip
boards: arm: stm32: add pinctrl state name for SPI peripheral
2021-11-26 11:36:42 +01:00
atmel
dts: same70: default USB HS controller to high-speed
2021-11-24 12:28:02 +01:00
broadcom
dts: arm: broadcom: viper-a72: paxdma: Add interrupt property
2021-03-08 20:24:04 -06:00
cypress
dts: psoc6: Use valid IRQ prio levels for CM4
2021-08-11 10:06:13 -05:00
gigadevice
drivers: serial: gd32 usart add interrupt support
2021-11-23 13:25:43 -05:00
infineon
soc: arm: add infineon_xmc series support
2020-05-09 14:21:44 +02:00
microchip
Microchip: MEC172x: eSPI driver
2021-10-26 09:27:20 -04:00
nordic
dts: nordic: add QSPI XIP area registers for nordic devices
2021-12-07 20:25:40 -06:00
nuvoton
drivers: spi: npcx: add SPI support to access the SPI flash
2021-11-01 21:48:20 -04:00
nxp
dts: rt685: enabled flexcomm15
2021-12-08 08:27:44 -05:00
quicklogic
dts: add EOS S3 GPIO definitions
2021-03-11 08:58:20 -05:00
renesas /gen3
dts: arm: rcar_gen3_cr7: Add I2C support to DTS
2021-07-14 20:58:50 -04:00
seeed
dts/arm/seeed: lora-e5: Update hse clock configuration
2021-08-24 07:19:12 -04:00
silabs
boards: efr32mg_sltb004a: Add minimal pwm support
2021-09-03 10:11:15 -04:00
st
dts: stm32f7: add fmc device node for f7 series devices
2021-12-01 14:02:00 -06:00
ti
linker: cc13x2_cc26x2: CCFG registers as partition
2021-04-15 12:25:55 +02:00
xilinx
soc: arm: dts: arm: xilinx: Zynq-7000 SoC init code, device tree data
2021-10-28 15:26:50 +02:00
armv6-m.dtsi
dts: arm: Add #address-cells to nvic nodes
2021-08-02 15:02:09 -04:00
armv7-a.dtsi
soc: arm: dts: arm: xilinx: Zynq-7000 SoC init code, device tree data
2021-10-28 15:26:50 +02:00
armv7-m.dtsi
dts: arm: Add #address-cells to nvic nodes
2021-08-02 15:02:09 -04:00
armv7-r.dtsi
arch: arm: Fix incorrect Cortex-R device tree specification.
2019-10-11 16:27:14 +02:00
armv8-m.dtsi
dts: arm: Add #address-cells to nvic nodes
2021-08-02 15:02:09 -04:00
armv8.1-m.dtsi
dts: arm: Add #address-cells to nvic nodes
2021-08-02 15:02:09 -04:00
b18aefdfd3