zephyr

History

Keith Packard 0b90fd5adf samples, tests, boards: Switch main return type from void to int As both C and C++ standards require applications running under an OS to return 'int', adapt that for Zephyr to align with those standard. This also eliminates errors when building with clang when not using -ffreestanding, and reduces the need for compiler flags to silence warnings for both clang and gcc. Most of these changes were automated using coccinelle with the following script: @@ @@ - void + int main(...) { ... - return; + return 0; ... } Approximately 40 files had to be edited by hand as coccinelle was unable to fix them. Signed-off-by: Keith Packard <keithp@keithp.com>		2023-04-14 07:49:41 +09:00
..
src	samples, tests, boards: Switch main return type from void to int	2023-04-14 07:49:41 +09:00
app.overlay
CMakeLists.txt
prj.conf	samples: Explicitly disable boot USB device support init at boot	2023-01-10 12:21:10 +01:00
README.rst
sample.yaml
usbd_next_prj.conf	samples: usb: console: enable optional new USB device support	2022-12-02 12:55:18 +01:00

README.rst

.. _cdc-acm-console:

Console over CDC ACM UART Sample
################################

Overview
********

A simple Hello World sample, with console output coming via CDC ACM UART.
Primarily intended to show the required config options.

Requirements
************

This project requires a USB device controller driver.

Building and Running
********************

This sample can be built for multiple boards, in this example we will build it
for the reel_board board:

.. zephyr-app-commands::
   :zephyr-app: samples/subsys/usb/console
   :board: reel_board
   :goals: flash
   :compact:

Plug the board into a host device, for sample, a PC running Linux OS.
The board will be detected as a CDC_ACM serial device. To see the console output
from the sample, use a command similar to "minicom -D /dev/ttyACM0".

.. code-block:: console

   Hello World! arm
   Hello World! arm
   Hello World! arm
   Hello World! arm

Troubleshooting
===============

You may need to stop modemmanager via "sudo stop modemmanager", if it is
trying to access the device in the background.