zephyr

History

Torsten Rasmussen 1cccc8a8fe cmake: increase minimal required version to 3.20.0 Move to CMake 3.20.0. At the Toolchain WG it was decided to move to CMake 3.20.0. The main reason for increasing CMake version is better toolchain support. Better toolchain support is added in the following CMake versions: - armclang, CMake 3.15 - Intel oneAPI, CMake 3.20 - IAR, CMake 3.15 and 3.20 Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>		2021-08-20 09:47:34 +02:00
..
src
CMakeLists.txt	cmake: increase minimal required version to 3.20.0	2021-08-20 09:47:34 +02:00
prj.conf
README.rst
sample.yaml

README.rst

.. _bq274xx-sample:

BQ274XX Sensor Sample
#####################

Overview
********

This sample application retrieves all the fuel gauge parameters,
- Voltage, in volts
- Average current, in amps
- Standby current, in amps
- Maximum load current, in amps
- Gauge temperature
- State of charge measurement in percentage
- Full Charge Capacity in mAh
- Remaining Charge Capacity in mAh
- Nominal Available Capacity in mAh
- Full Available Capacity in mAh
- Average power in mW
- State of health measurement in percentage

from BQ274XX sensor and prints this information to the UART console.

Requirements
************

- nrf9160_innblue22 board with BQ274XX sensor `BQ274XX Sensor`_

Building and Running
********************

Build this sample using the following commands:

.. zephyr-app-commands::
   :zephyr-app: samples/sensor/bq274xx
   :board: nrf9160_innblue22
   :goals: build flash

References
**********

.. target-notes::

.. _BQ274XX Sensor: http://www.ti.com/lit/ds/symlink/bq27421-g1.pdf