zephyr

History

Jukka Rissanen 5197266768 net: nbuf: Use net_nbuf_get_frag() to allocate a fragment The code used net_nbuf_get_reserve_{rx\|tx}_data() function to allocate a fragment. Instead of that low level function, use net_nbuf_get_frag() instead. There are few places this is not possible or is too big change like in few test programs. Change-Id: Ied7e2b7db352de998b200ffa6ff82471bfa5ebe3 Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>		2017-03-09 20:33:43 +02:00
..
src	net: nbuf: Use net_nbuf_get_frag() to allocate a fragment	2017-03-09 20:33:43 +02:00
Makefile	samples: remove obsolete KERNEL_TYPE	2016-12-20 01:12:43 +00:00
prj.conf	drivers/net/ieee802154: Change configuration prefix	2017-02-08 10:12:35 +02:00
README
wpan-radio-spec.txt	wpanusb: Update wpan protocol document	2016-12-02 12:41:05 +02:00

README

This application exports ieee802154 radio over USB to be used in other
Operation Systems like Linux. In this scenario Linux SoftMAC driver would
be used implementing ieee802154 stack inside Linux.

When connected to Linux it is recognized by Linux with wpanusb kernel
driver as:

...
T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=8086 ProdID=ff03 Rev=01.00
C:  #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=wpanusb
...

bring it up with:

#!/bin/sh

PHY=`iwpan phy | grep wpan_phy | cut -d' ' -f2`

echo 'Using phy' $PHY

iwpan dev wpan0 set pan_id 0xabcd
iwpan dev wpan0 set short_addr 0xbeef
iwpan phy $PHY set channel 0 26
ip link add link wpan0 name lowpan0 type lowpan
ip link set wpan0 up
ip link set lowpan0 up