zephyr

History

Vinayak Kariappa Chettimada 2d6f6a7729 samples: Bluetooth: hci_rpmsg with 2 BIS configuration Update the config file to support 2 Broadcast Streams in hci_rpmsg samples for running iso_broadcast and iso_receive samples on nRF5340 DK. Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>		2022-10-10 13:55:06 +02:00
..
src	includes: prefer <zephyr/kernel.h> over <zephyr/zephyr.h>	2022-09-05 16:31:47 +02:00
CMakeLists.txt	cmake: increase minimal required version to 3.20.0	2021-08-20 09:47:34 +02:00
debug_overlay.conf
nrf5340_cpunet_iso_broadcast-bt_ll_sw_split.conf	samples: Bluetooth: hci_rpmsg with 2 BIS configuration	2022-10-10 13:55:06 +02:00
nrf5340_cpunet_iso_receive-bt_ll_sw_split.conf	samples: Bluetooth: hci_rpmsg with 2 BIS configuration	2022-10-10 13:55:06 +02:00
prj.conf	samples: Bluetooth: hci_rpmsg: Fix Broadcast and Sync Receiver prj conf	2022-04-29 08:57:02 +02:00
README.rst	doc: use :kconfig:option: domain role	2022-03-02 09:28:37 +01:00
sample.yaml	samples: Bluetooth: hci_rpmsg with 2 BIS configuration	2022-10-10 13:55:06 +02:00

README.rst

.. _bluetooth-hci-rpmsg-sample:

Bluetooth: HCI RPMsg
####################

Overview
********

This sample exposes :ref:`bluetooth_controller` support
to another device or CPU using RPMsg transport which is
a part of `OpenAMP <https://github.com/OpenAMP/open-amp/>`__.

Requirements
************

* A board with :ref:`ipm_api` driver and Bluetooth LE support

Building and Running
********************

This sample can be found under :zephyr_file:`samples/bluetooth/hci_rpmsg`
in the Zephyr tree.

To use this application, you need a board with a Bluetooth controller
and IPM drivers.
You can then build this application and flash it onto your board in
the usual way. See :ref:`boards` for board-specific building and
programming information.

To test this sample, you need a separate device/CPU that acts as Bluetooth
HCI RPMsg peer.
This sample is compatible with the HCI RPMsg driver provided by
Zephyr's Bluetooth :ref:`bt_hci_drivers` core. See the
:kconfig:option:`CONFIG_BT_RPMSG` configuration option for more information.

You might need to adjust the Kconfig configuration of this sample to make it
compatible with the peer application. For example, :kconfig:option:`CONFIG_BT_MAX_CONN`
must be equal to the maximum number of connections supported by the peer application.

Refer to :ref:`bluetooth-samples` for general information about Bluetooth samples.