| .. |
|
adc
|
drivers: adc: fix underflow in lmp90xxx_adc_start_read channel check
|
2025-06-11 09:55:42 +02:00 |
|
audio
|
drivers: clock_control: nrf2: align with hw binding names
|
2025-06-13 11:12:43 +02:00 |
|
auxdisplay
|
drivers/auxdisplay: format jhd1313 driver.
|
2025-05-12 13:31:13 +02:00 |
|
bbram
|
drivers: bbram: npcx: bypass npcx49nf errata rev1.5 No.2.30
|
2025-03-20 07:21:23 +01:00 |
|
bluetooth
|
drivers: bluetooth: add BT-CAL data load for NXP IW612/IW416 SoC
|
2025-06-13 10:36:28 -04:00 |
|
cache
|
drivers: cache: nrf: Resolve NRF_CACHE_HAS_LINEADDR issue
|
2025-06-12 09:33:48 -07:00 |
|
can
|
drivers: can: mcp2515: reformat files using clang-format
|
2025-06-02 13:29:17 +02:00 |
|
charger
|
charger: axp2101: Guards against out-of-bounds read
|
2025-05-28 12:22:21 +02:00 |
|
clock_control
|
drivers: clock_control: nrf2: split configs per driver
|
2025-06-13 11:12:43 +02:00 |
|
comparator
|
dts: enum_macros: make sure that they are lowercase
|
2025-05-28 17:48:57 +02:00 |
|
console
|
drivers: console: uart_mcumgr: rename callback
|
2025-04-22 09:58:40 +02:00 |
|
coredump
|
|
|
|
counter
|
drivers: clock_control: nrf2: align with hw binding names
|
2025-06-13 11:12:43 +02:00 |
|
crypto
|
drivers: crypto: cc23x0: Add support for DMA mode
|
2025-06-11 16:06:55 -07:00 |
|
dac
|
drivers: dac: esp32: avoid out-of-range channel ID
|
2025-06-11 08:19:09 +02:00 |
|
dai
|
drivers: ssp: unify clock selection flow across ACE platforms
|
2025-05-31 07:03:39 -04:00 |
|
debug
|
drivers: debug: silabs_pti: Add driver for Packet Trace Interface
|
2025-06-13 11:12:20 +02:00 |
|
disk
|
drivers: disk: nvme: fix include guard typo
|
2025-06-06 09:08:33 -07:00 |
|
display
|
drivers: display: ssd1306: fix reset
|
2025-05-28 01:47:24 +02:00 |
|
dma
|
drivers: dma: max32: Handle channel index conversion in HAL
|
2025-06-10 08:47:42 +02:00 |
|
dp
|
drivers: dp: use atomic APIs for pin set/reset
|
2025-05-22 13:44:55 +02:00 |
|
edac
|
|
|
|
eeprom
|
drivers: eeprom: tmp11x: remove redundant build assert
|
2025-05-15 11:18:41 +02:00 |
|
entropy
|
drivers: entropy: virtio: Unify the notation to VIRTIO
|
2025-06-07 15:39:06 +01:00 |
|
espi
|
drivers/espi: ite: Refactor register defines into .c for SoC flexibility
|
2025-06-05 09:34:23 +02:00 |
|
ethernet
|
drivers: ethernet: nxp: timestamping to all potential packets.
|
2025-06-13 10:40:49 -04:00 |
|
firmware
|
drivers: nrf_ironside dvfs service
|
2025-06-12 11:32:32 +02:00 |
|
flash
|
drivers: flash: nrf_qspi_nor: Handle properly multiple XIP users
|
2025-06-12 11:45:10 +02:00 |
|
fpga
|
drivers: fpga: ice40: Fix log level
|
2025-05-09 01:40:35 +02:00 |
|
fuel_gauge
|
fuel_gauge: add basic support for AXP2101 chip
|
2025-05-22 04:51:27 +02:00 |
|
gnss
|
gnss: u_blox_f9p: Introduce High-precision GNSS module
|
2025-06-04 08:44:59 +02:00 |
|
gpio
|
driver: gpio: siwx91x: Add device runtime support for gpio driver
|
2025-06-13 10:08:38 -07:00 |
|
haptics
|
|
|
|
hdlc_rcp_if
|
drivers: nxp: Do not use private L2 data structure.
|
2025-05-05 14:25:13 +02:00 |
|
hwinfo
|
boards: frdm_mcxa153,frdm_mcxa156: add hwinfo support
|
2025-06-12 10:24:40 +02:00 |
|
hwspinlock
|
|
|
|
i2c
|
i2c: npcx: Verify msg is not null
|
2025-06-13 07:37:14 +02:00 |
|
i2s
|
drivers: clock_control: nrf2: align with hw binding names
|
2025-06-13 11:12:43 +02:00 |
|
i3c
|
drivers: i3c: npcx: add support for target reset request handling
|
2025-06-06 08:43:32 +02:00 |
|
ieee802154
|
drivers: ieee802154: update mcxw ieee802154 driver
|
2025-06-12 09:34:16 -07:00 |
|
input
|
drivers: input: esp32: fix threshold calculation
|
2025-06-09 14:54:30 -07:00 |
|
interrupt_controller
|
drivers: intc_wch_pfic: replace shift operations with BIT macro
|
2025-06-11 08:18:58 +02:00 |
|
ipm
|
driver: ipm: introduce IPM_MAX_DATA_SIZE build configuration
|
2025-05-27 10:29:20 +02:00 |
|
led
|
drivers: led: fix LED_BRIGTHNESS_MAX typo
|
2025-06-09 14:50:33 -07:00 |
|
led_strip
|
leds: add arduino,modulino-smartleds
|
2025-05-14 11:03:10 +01:00 |
|
lora
|
|
|
|
mbox
|
drivers: mbox_nxp_imx_mu: return negative errno value on error
|
2025-06-10 22:06:40 +02:00 |
|
mdio
|
drivers: mdio: fix typo in macro name
|
2025-06-10 08:48:20 +02:00 |
|
memc
|
drivers: memc: Add support for siwx91x QSPI controller
|
2025-05-15 09:00:39 +02:00 |
|
mfd
|
drivers: mfd: add FLEXCOM drivers for Microchip SAM devices
|
2025-05-28 08:14:08 +02:00 |
|
mipi_dbi
|
pm: policy: remove redundant ifdef exclusion of device_power_lock
|
2025-06-05 09:34:31 +02:00 |
|
mipi_dsi
|
drivers: mipi_dsi: dsi_mcux_2l: Use NXP DCNano DBI driver for memory write
|
2025-04-23 10:03:42 +02:00 |
|
misc
|
drivers: misc: add Renesas RA ELC driver
|
2025-06-13 10:09:35 +02:00 |
|
mm
|
intel_adsp: ace30: mm: Set write permissions during memory mapping
|
2025-03-18 16:41:22 +01:00 |
|
modem
|
modem_cellular: Add support for the simcom a76xx modem
|
2025-05-28 16:37:53 +02:00 |
|
mspi
|
drivers: mspi: add apollo5x MSPI controller
|
2025-05-07 10:33:38 +02:00 |
|
net
|
net: nsos_sockets: conn_mgr support
|
2025-05-22 11:31:54 +02:00 |
|
pcie
|
|
|
|
peci
|
|
|
|
pinctrl
|
drivers: adc: siwx91x: Analog pin initialization
|
2025-06-10 12:07:33 +02:00 |
|
pm_cpu_ops
|
|
|
|
power_domain
|
|
|
|
ps2
|
|
|
|
ptp_clock
|
drivers: ptp_clock: Add NXP NETC PTP Clock Driver
|
2025-06-06 14:47:53 +01:00 |
|
pwm
|
drivers: clock_control: nrf2: align with hw binding names
|
2025-06-13 11:12:43 +02:00 |
|
regulator
|
regulator: npm1300: configure active discharge
|
2025-06-12 11:40:32 +02:00 |
|
reset
|
drivers: Wrap device driver APIs using DEVICE_API macro
|
2025-04-28 13:41:03 +02:00 |
|
retained_mem
|
drivers: retained_mem: Fix using multiple nRF retained memory regions
|
2025-03-07 20:23:42 +01:00 |
|
rtc
|
drivers: rtc: rpi_pico: fix tm_mon and tm_mday offsets
|
2025-06-12 13:40:59 +02:00 |
|
sdhc
|
drivers: Update dtc transfer info alignment
|
2025-05-30 10:26:34 +02:00 |
|
sensor
|
drivers: sensor: wsen_itds_2533020201601: fix unhandled returned values
|
2025-06-13 11:13:25 +02:00 |
|
serial
|
driver: serial: uart_shell: Add read command
|
2025-06-13 14:29:09 +02:00 |
|
sip_svc
|
|
|
|
smbus
|
|
|
|
spi
|
drivers: spi: mcux_flexio: Fix flexio SPI loop delay issue
|
2025-06-13 10:38:32 -04:00 |
|
stepper
|
drivers: stepper: tmc50xx: add a null pointer check
|
2025-06-04 17:04:30 +02:00 |
|
syscon
|
drivers: syscon: Introduce BFLB Efuse driver
|
2025-05-19 10:11:58 +02:00 |
|
tee
|
|
|
|
timer
|
drivers: timer: nrf_rtc_timer: Optimize z_nrf_rtc_timer_get_ticks
|
2025-06-12 09:26:29 -07:00 |
|
usb
|
usb: nxp mcux: usb device remote wakeup
|
2025-06-10 22:07:27 +02:00 |
|
usb_c
|
drivers: usb_c: fusb307: Check return value gpio_add_callback()
|
2025-06-13 14:29:23 +02:00 |
|
video
|
drivers: video: fix null deref in video_get_csi_link_freq()
|
2025-06-13 10:10:13 +02:00 |
|
virtio
|
drivers: virtio: add VIRTIO MMIO transport driver
|
2025-06-07 15:39:06 +01:00 |
|
virtualization
|
|
|
|
w1
|
w1: shell: adopt SHELL_HELP
|
2025-06-11 09:55:21 +02:00 |
|
watchdog
|
watchdog: shell: adopt SHELL_HELP
|
2025-06-11 09:55:21 +02:00 |
|
wifi
|
drivers: wifi: nxp: Modify shim driver to support btwt changes.
|
2025-06-10 08:47:25 +02:00 |
|
xen
|
|
|
|
CMakeLists.txt
|
drivers: debug: Add debug driver class
|
2025-06-13 11:12:20 +02:00 |
|
Kconfig
|
drivers: debug: Add debug driver class
|
2025-06-13 11:12:20 +02:00 |
f61b5bd705