| .. |
|
acpi
|
|
|
|
adc
|
drivers: adc: add it515xx_evb board adc driver
|
2025-04-23 15:02:36 +02:00 |
|
alh
|
|
|
|
arc
|
|
|
|
arm
|
clocks: atmel: sam0: Fix gclk and mclk clock bindings
|
2025-01-14 20:49:03 +01:00 |
|
audio
|
drivers: audio: Add driver for tlv320aic3110
|
2025-03-24 12:13:51 +01:00 |
|
auxdisplay
|
drivers: auxdisplay: hd44780: add rs-line-delay dt parameter
|
2024-11-28 20:51:39 +01:00 |
|
base
|
dts: bindings: improve base.yaml descriptions
|
2025-01-30 22:59:03 +01:00 |
|
battery
|
battery: support additional properties
|
2024-08-29 16:12:36 -04:00 |
|
bluetooth
|
drivers: bluetooth: Introduce SiWx91x HCI driver
|
2025-02-11 22:07:11 +01:00 |
|
cache
|
dts: cache: Simplify the description of the binding
|
2025-02-25 15:13:08 +00:00 |
|
can
|
drivers: can_mcp251xfd: Add XSTBY option
|
2025-04-02 10:30:59 +02:00 |
|
charger
|
dts: bindings: Define a bus for the axp192/axp2101.
|
2025-04-24 16:53:20 +02:00 |
|
clock
|
drivers: clock control: Initial support for RZ/A2M
|
2025-04-25 14:05:01 +02:00 |
|
comparator
|
drivers: comparator: Initial Comparator support for Renesas RA
|
2025-03-13 07:22:00 +01:00 |
|
coredump
|
|
|
|
counter
|
drivers: counter: rts5912: add support timer32 counter driver
|
2025-04-22 14:02:27 +02:00 |
|
cpu
|
soc: add OpenHW Group CVA6 SoC
|
2025-04-11 13:33:50 +02:00 |
|
crypto
|
drivers: crypto: Add support for cc23x0 AES
|
2025-03-07 19:47:11 +01:00 |
|
dac
|
drivers: dac: Add TI DAC161S997 driver
|
2025-04-02 12:53:03 +02:00 |
|
dai
|
dts: bindings: dai: Change the property names in the DTS
|
2025-03-17 19:58:53 +01:00 |
|
debug
|
dts: bindings: debug: Add binding for ARM STMESP
|
2024-09-06 11:31:27 -04:00 |
|
dfpmcch
|
|
|
|
dfpmccu
|
|
|
|
disk
|
|
|
|
display
|
drivers: display: Update nxp,dcnano-lcdif to support IP change on RT700
|
2025-04-23 10:03:42 +02:00 |
|
dma
|
drivers: dma: siwx91x: Allow static allocation of DMA channel descriptors
|
2025-04-17 17:23:32 +02:00 |
|
dsa
|
dts: bindings: dsa: add common bindings file
|
2025-04-24 01:26:46 +02:00 |
|
edac
|
|
|
|
espi
|
dts: bindings: espi: Change the property names in the DTS
|
2025-03-24 15:10:06 +01:00 |
|
ethernet
|
drivers: ethernet: stm32: remove internal phy code
|
2025-04-02 10:31:34 +02:00 |
|
firmware
|
drivers: firmware: scmi: add cpu domain protocol
|
2025-04-21 22:03:27 +02:00 |
|
flash_controller
|
drivers: flash: silabs: Add low power write support
|
2025-03-07 20:02:26 +01:00 |
|
fpga
|
drivers: fpga: separate drivers of iCE40 for SPI and GPIO bitbang
|
2024-11-28 15:39:33 +00:00 |
|
fs
|
fs: enable fstab devicetree integration for fatfs
|
2025-03-15 13:07:40 +01:00 |
|
fuel-gauge
|
fuel_gauge: composite analog fuel gauge
|
2024-08-29 16:12:36 -04:00 |
|
gnss
|
gnss: rename u-blox M10 driver to M8
|
2024-08-26 17:27:12 -04:00 |
|
gpio
|
drivers: gpio: Add LP GPIO
|
2025-04-25 14:06:18 +02:00 |
|
haptics
|
drivers: haptics: drv2605: Introduces overdrive clamp prop
|
2024-08-20 14:52:32 -04:00 |
|
hda
|
|
|
|
hdlc_rcp_if
|
drivers: net: ot: Add HDLC HOST support with UART communication to RCP
|
2024-12-20 16:06:33 +01:00 |
|
hwinfo
|
Documentation: Update documenation for Infineon boards
|
2024-11-14 20:36:38 -06:00 |
|
hwspinlock
|
dts: bindings: hwspinlock: replace underscore with hyphen
|
2025-01-29 15:17:55 +01:00 |
|
i2c
|
dts: bindings: i2c: added bindings for wch
|
2025-04-17 21:17:06 +02:00 |
|
i2s
|
drivers: i2s_mcux_sai: control MCLK direction with DT property
|
2025-04-16 08:09:41 +02:00 |
|
i3c
|
drivers: i3c: add v1.0 support flag
|
2025-04-17 21:16:45 +02:00 |
|
ieee802154
|
dts: nxp: add ieee and trng bindings and nodes
|
2025-02-14 03:08:48 +01:00 |
|
iio/afe
|
sensor: current_amp: add a noise threshold
|
2025-04-09 19:32:02 +02:00 |
|
input
|
drivers/input/it51xxx: implement kbd driver
|
2025-04-11 14:53:11 +02:00 |
|
interrupt-controller
|
drivers/interrupt: Add interrupt and wake-up control drivers of it51xxx
|
2025-04-08 10:48:26 +02:00 |
|
ipc
|
ipc_service: icmsg: Add "unbound" functionality
|
2025-02-14 13:34:49 +01:00 |
|
ipm
|
drivers: ipm: Add IPM over MBOX driver
|
2024-09-26 09:17:48 -05:00 |
|
led
|
drivers: led: Add driver for AXP192/2101 LED control function
|
2025-04-24 16:53:20 +02:00 |
|
led_strip
|
docs: raspberrrypi: Correct names of products
|
2025-04-03 15:27:50 -07:00 |
|
lora
|
dts: stm32: Streamline Devicetree binding descriptions
|
2025-03-04 21:55:54 +01:00 |
|
mbox
|
drivers: mbox: Add Arm MHUv3 Mailbox driver
|
2025-03-31 11:29:40 +02:00 |
|
mdio
|
drivers: mdio_esp32: let the REF_CLK be initialized before the PHY.
|
2025-04-23 14:59:36 +02:00 |
|
memory-controllers
|
dts: bindings: memc: add bindings for stm32 xspi psram
|
2025-03-24 15:09:47 +01:00 |
|
memory-window
|
|
|
|
mfd
|
dts: bindings: Define a bus for the axp192/axp2101.
|
2025-04-24 16:53:20 +02:00 |
|
mhu
|
|
|
|
mipi-dbi
|
drivers: mipi_dbi: introduce NXP DCnano driver
|
2025-04-23 10:03:42 +02:00 |
|
mipi-dsi
|
drivers: mipi_dsi: add mipi phys timing setting for renesas,ra-mipi-dsi
|
2025-03-13 10:49:13 +01:00 |
|
misc
|
dts: bindings: Add binding for Nordic MPC
|
2025-04-08 01:51:18 +02:00 |
|
mm
|
|
|
|
mmc
|
dts: stm32: Streamline Devicetree binding descriptions
|
2025-03-04 21:55:54 +01:00 |
|
mmu_mpu
|
dts: bindings: add nxp,sysmpu binding
|
2024-12-06 22:23:06 +01:00 |
|
modem
|
dts: bindings: add mdm-wake-gpios to Sequans Monarch 2 GM02S binding
|
2025-04-07 21:14:27 +02:00 |
|
mspi
|
drivers: ambiq: Change the way to power on ambiq drivers
|
2025-03-24 09:54:17 +01:00 |
|
mtd
|
drivers: sensor: rename tmp116 to tmp11x
|
2025-04-11 16:17:35 +02:00 |
|
net/wireless
|
soc: nordic: nrf54h: Add option to use NFCT pins as GPIOs
|
2025-03-12 14:04:57 +00:00 |
|
options
|
|
|
|
ospi
|
dts: stm32: Streamline Devicetree binding descriptions
|
2025-03-04 21:55:54 +01:00 |
|
pcie
|
drivers: pcie: add brcmstb pcie controller driver
|
2025-01-08 21:03:03 +01:00 |
|
peci
|
|
|
|
phy
|
dts: stm32: Streamline Devicetree binding descriptions
|
2025-03-04 21:55:54 +01:00 |
|
pinctrl
|
drivers: pinctrl: Add initial support for RZ/A2M
|
2025-04-25 14:05:01 +02:00 |
|
pm_cpu_ops
|
|
|
|
power
|
dts: power: ambiq: change to use ambiq HAL to do power-on config
|
2025-04-24 16:55:08 +02:00 |
|
power-domain
|
drivers: power_domain: Add a driver to trigger TURN_ON/TURN_OFF actions
|
2025-02-13 16:40:10 +01:00 |
|
ppc
|
drivers: usb_c: numaker: support Nuvoton's M2L31 series
|
2024-08-01 12:38:53 +02:00 |
|
ps2
|
|
|
|
pwm
|
dts: bindings: pwm: Add Arduino PWM nexus mapping
|
2025-04-02 12:56:06 +02:00 |
|
qspi
|
dts: stm32: Streamline Devicetree binding descriptions
|
2025-03-04 21:55:54 +01:00 |
|
regulator
|
dts: bindings: Define a bus for the axp192/axp2101.
|
2025-04-24 16:53:20 +02:00 |
|
reserved-memory
|
dts: bindings: Update Nordic owned memory bindings
|
2024-10-15 04:11:21 -04:00 |
|
reset
|
drivers: reset: Add generic reset MMIO driver
|
2025-04-02 10:31:12 +02:00 |
|
retained_mem
|
|
|
|
retention
|
|
|
|
riscv
|
dts: bindings: nrf-vpr: Allow specifying pins and not using launcher
|
2025-04-08 16:11:51 +02:00 |
|
rng
|
dts: rng: Simplify the description of the binding
|
2025-04-03 13:16:44 +02:00 |
|
rtc
|
drivers: rtc: add nxp pcf2123 driver
|
2025-04-07 21:13:29 +02:00 |
|
sd
|
dts: sd: Simplify the description of the binding
|
2025-04-03 13:16:44 +02:00 |
|
sdhc
|
drivers: sdhc: add sdhc driver for Ambiq MCU
|
2025-04-11 06:33:24 +02:00 |
|
sensor
|
sensor: icm45686: Add I3C bus support
|
2025-04-25 14:05:10 +02:00 |
|
serial
|
drivers: serial: Add support for RZ/A2M
|
2025-04-25 14:05:01 +02:00 |
|
shi
|
dts: shi: Simplify the description of the binding
|
2025-04-03 13:16:44 +02:00 |
|
sip_svc
|
|
|
|
smbus
|
dts: smbus: Simplify the description of the binding
|
2025-04-03 13:16:44 +02:00 |
|
sound
|
|
|
|
spi
|
drivers: spi: Add support for cc23x0 SPI
|
2025-04-17 00:55:56 +02:00 |
|
sram
|
dts: sram: Simplify the description of the binding
|
2025-04-03 13:16:44 +02:00 |
|
stepper
|
drivers: stepper: adi_tmc: Add tmc51xx support
|
2025-04-22 12:09:18 +02:00 |
|
syscon
|
|
|
|
tach
|
drivers/sensor/ite/tach/it51xxx: implement tachometer driver
|
2025-04-24 11:56:44 +02:00 |
|
tcpc
|
dts: stm32: Streamline Devicetree binding descriptions
|
2025-03-04 21:55:54 +01:00 |
|
test
|
tests: lib: devicetree: Add tests for endpoint DT macros
|
2024-12-06 22:23:31 +01:00 |
|
timer
|
drivers: timer: Add initial support for RZ/A2M
|
2025-04-25 14:05:01 +02:00 |
|
timestamp
|
|
|
|
usb
|
dts: bindings: usb: Introduce STM32N6 OTG HS compatible
|
2025-04-14 11:48:54 +02:00 |
|
usb-c
|
usbc: add support for vbus measurement using TCPCI compliant device
|
2024-09-23 10:03:19 +02:00 |
|
video
|
dts: stm32: Streamline Devicetree binding descriptions
|
2025-03-04 21:55:54 +01:00 |
|
virtualization
|
drivers: virtualization: Add interface for ivshmem-v2
|
2023-05-14 18:17:33 -04:00 |
|
w1
|
drivers: w1: Add MAX32xxx 1-Wire driver
|
2024-10-18 14:16:14 +02:00 |
|
watchdog
|
drivers/watchdog/it51xxx: implement watchdog driver
|
2025-04-15 09:28:19 +02:00 |
|
wifi
|
wifi: nrf70: configurable IOVDD settling delay
|
2025-04-15 11:24:53 +02:00 |
|
xen
|
|
|
|
xspi
|
dts: stm32: Streamline Devicetree binding descriptions
|
2025-03-04 21:55:54 +01:00 |
|
binding-types.txt
|
kscan: drop kscan and any reference
|
2025-03-13 16:56:26 +00:00 |
|
vendor-prefixes.txt
|
boards: ruiside: art-pi2: add minimum support
|
2025-04-24 20:27:42 +02:00 |
5d74f78332