..
96b_aerocore2
boards: arm: 96b_aerocore2: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
96b_argonkey
boards: stm32: Turn hardware stack protection on by default
2020-09-30 10:46:16 -05:00
96b_avenger96
boards: stm32: Turn hardware stack protection on by default
2020-09-30 10:46:16 -05:00
96b_carbon
boards: stm32: Turn hardware stack protection on by default
2020-09-30 10:46:16 -05:00
96b_carbon_nrf51
96b_meerkat96
device: Const-ify all device driver instance pointers
2020-09-02 13:48:13 +02:00
96b_neonkey
boards: stm32: Turn hardware stack protection on by default
2020-09-30 10:46:16 -05:00
96b_nitrogen
boards: dts: Fix broken link in comment
2020-07-31 09:00:32 -05:00
96b_stm32_sensor_mez
boards: arm: 96b_stm32_sensor_mez: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
96b_wistrio
boards: stm32: Turn hardware stack protection on by default
2020-09-30 10:46:16 -05:00
actinius_icarus
device: Const-ify all device driver instance pointers
2020-09-02 13:48:13 +02:00
adafruit_feather_m0_basic_proto
device: Const-ify all device driver instance pointers
2020-09-02 13:48:13 +02:00
adafruit_feather_nrf52840
boards: arm: adafruit_feather_nrf52840: use dual mode for QSPI NOR
2020-10-02 11:28:17 +02:00
adafruit_feather_stm32f405
boards: stm32: Turn hardware stack protection on by default
2020-09-30 10:46:16 -05:00
adafruit_itsybitsy_m4_express
device: Const-ify all device driver instance pointers
2020-09-02 13:48:13 +02:00
adafruit_trinket_m0
device: Const-ify all device driver instance pointers
2020-09-02 13:48:13 +02:00
arduino_due
boards: arduino_due: Enable internal pullup on uart rx line
2020-09-14 18:49:05 -05:00
arduino_nano_33_iot
device: Const-ify all device driver instance pointers
2020-09-02 13:48:13 +02:00
arduino_zero
boards: atmel: set BUILD_OUTPUT_HEX for OpenOCD boards
2020-09-17 14:44:21 -05:00
arty
boards: arty: document source for fpga bitstream partition size
2020-09-29 13:48:59 -05:00
atsamd20_xpro
boards: atmel: set BUILD_OUTPUT_HEX for OpenOCD boards
2020-09-17 14:44:21 -05:00
atsamd21_xpro
boards: atmel: set BUILD_OUTPUT_HEX for OpenOCD boards
2020-09-17 14:44:21 -05:00
atsame54_xpro
boards: atmel: set BUILD_OUTPUT_HEX for OpenOCD boards
2020-09-17 14:44:21 -05:00
atsamr21_xpro
samples: net: echo_server: Decrease buffer for atsamr21_xpro
2020-09-22 16:15:10 -05:00
b_l4s5i_iot01a
boards: arm: b_l4s5i_iot01a: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
b_l072z_lrwan1
boards/arm: Remove soc compatible from board compatible
2020-09-30 09:54:41 -05:00
bbc_microbit
boards: dts: Fix broken link in comment
2020-07-31 09:00:32 -05:00
bcm958401m2
bcm958402m2_a72
boards: arm: bcm958402m2_a72: remove CONFIG_PCIE
2020-07-14 19:35:31 -04:00
bcm958402m2_m7
bl652_dvk
boards: dts: Fix broken link in comment
2020-07-31 09:00:32 -05:00
bl653_dvk
boards: Add BL653DVK support
2020-08-18 19:01:42 +02:00
bl654_dvk
boards: Move 802.15.4 SOC configuration from Nordic boards to SOCs
2020-08-07 11:56:35 +02:00
black_f407ve
boards: arm: nucleo_f407ve: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
black_f407zg_pro
boards: arm: nucleo_f407zg: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
blackpill_f411ce
boards: arm: blackpill_f411ce: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
bt510
drivers: sensors: sm351lt: Add new driver
2020-08-24 16:48:47 -05:00
cc26x2r1_launchxl
boards: doc update for cc32xx and cc13x2/cc26x2 boards
2020-09-14 19:14:34 -05:00
cc1352r1_launchxl
boards: doc update for cc32xx and cc13x2/cc26x2 boards
2020-09-14 19:14:34 -05:00
cc3220sf_launchxl
boards: doc update for cc32xx and cc13x2/cc26x2 boards
2020-09-14 19:14:34 -05:00
cc3235sf_launchxl
boards: doc update for cc32xx and cc13x2/cc26x2 boards
2020-09-14 19:14:34 -05:00
circuitdojo_feather_nrf9160
device: Const-ify all device driver instance pointers
2020-09-02 13:48:13 +02:00
colibri_imx7d_m4
device: Const-ify all device driver instance pointers
2020-09-02 13:48:13 +02:00
cy8ckit_062_wifi_bt_m0
device: Const-ify all device driver instance pointers
2020-09-02 13:48:13 +02:00
cy8ckit_062_wifi_bt_m4
device: Const-ify all device driver instance pointers
2020-09-02 13:48:13 +02:00
decawave_dwm1001_dev
boards: dts: Fix broken link in comment
2020-07-31 09:00:32 -05:00
degu_evk
boards: Fix obsolete link to flash partition doc
2020-09-15 12:46:01 +02:00
disco_l475_iot1
boards: arm: disco_l475_iot1: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
dragino_lsn50
boards/arm: Remove soc compatible from board compatible
2020-09-30 09:54:41 -05:00
efm32gg_stk3701a
device: Const-ify all device driver instance pointers
2020-09-02 13:48:13 +02:00
efm32hg_slstk3400a
device: Const-ify all device driver instance pointers
2020-09-02 13:48:13 +02:00
efm32pg_stk3402a
device: Const-ify all device driver instance pointers
2020-09-02 13:48:13 +02:00
efm32wg_stk3800
device: Const-ify all device driver instance pointers
2020-09-02 13:48:13 +02:00
efr32_radio
device: Const-ify all device driver instance pointers
2020-09-02 13:48:13 +02:00
efr32mg_sltb004a
device: Const-ify all device driver instance pointers
2020-09-02 13:48:13 +02:00
faze
boards: faze: enable EEPROM support
2020-09-14 12:47:32 -05:00
frdm_k22f
dts: clocks: kinetis: set pllfll and er32k clock settings from dts
2020-09-29 14:05:50 -05:00
frdm_k64f
dts: clocks: kinetis: set pllfll and er32k clock settings from dts
2020-09-29 14:05:50 -05:00
frdm_k82f
dts: clocks: kinetis: set pllfll and er32k clock settings from dts
2020-09-29 14:05:50 -05:00
frdm_kl25z
dts: clocks: kinetis: set pllfll and er32k clock settings from dts
2020-09-29 14:05:50 -05:00
frdm_kw41z
dts: clocks: kinetis: set pllfll and er32k clock settings from dts
2020-09-29 14:05:50 -05:00
google_kukui
boards/arm: Remove soc compatible from board compatible
2020-09-30 09:54:41 -05:00
hexiwear_k64
dts: clocks: kinetis: set pllfll and er32k clock settings from dts
2020-09-29 14:05:50 -05:00
hexiwear_kw40z
dts: clocks: kinetis: set pllfll and er32k clock settings from dts
2020-09-29 14:05:50 -05:00
holyiot_yj16019
boards: Move 802.15.4 SOC configuration from Nordic boards to SOCs
2020-08-07 11:56:35 +02:00
ip_k66f
dts: clocks: kinetis: set pllfll and er32k clock settings from dts
2020-09-29 14:05:50 -05:00
lpcxpresso11u68
boards: lpcxpresso11u68: enable BUILD_OUTPUT_HEX
2020-09-14 12:47:32 -05:00
lpcxpresso55s16
device: Const-ify all device driver instance pointers
2020-09-02 13:48:13 +02:00
lpcxpresso55s69
Revert "boards: lpcxpresso55s69_cpu1: disable sanitycheck"
2020-09-16 09:27:54 -05:00
lpcxpresso54114
device: Const-ify all device driver instance pointers
2020-09-02 13:48:13 +02:00
mec15xxevb_assy6853
device: Const-ify all device driver instance pointers
2020-09-02 13:48:13 +02:00
mec1501modular_assy6885
boards: mec1501modular: build without image gen tool
2020-09-02 13:28:13 -04:00
mec2016evb_assy6797
device: Const-ify all device driver instance pointers
2020-09-02 13:48:13 +02:00
mikroe_mini_m4_for_stm32
boards: arm: mikroe_mini_m4: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
mimx8mm_evk
device: Const-ify all device driver instance pointers
2020-09-02 13:48:13 +02:00
mimxrt685_evk
board: mimxrt685_evk update flash command
2020-09-02 09:42:29 -05:00
mimxrt1010_evk
debugger: rt1xxx series pyocd supporting update
2020-09-28 12:45:44 -05:00
mimxrt1015_evk
debugger: rt1xxx series pyocd supporting update
2020-09-28 12:45:44 -05:00
mimxrt1020_evk
device: Const-ify all device driver instance pointers
2020-09-02 13:48:13 +02:00
mimxrt1050_evk
boards: arm: Add troubleshooting section to mimxrt10{50,60}_evk doc
2020-09-10 15:37:40 -05:00
mimxrt1060_evk
drivers: mcux: imx rt flexcan support
2020-09-29 14:03:10 -05:00
mimxrt1064_evk
drivers: mcux: imx rt flexcan support
2020-09-29 14:03:10 -05:00
mm_swiftio
device: Const-ify all device driver instance pointers
2020-09-02 13:48:13 +02:00
mps2_an385
mps2_an385: use default stack sizes
2020-09-08 17:23:17 -04:00
mps2_an521
boards: mps2_an521: do not offset the image by default by 0x400.
2020-09-22 19:38:51 +02:00
msp_exp432p401r_launchxl
npcx7m6fb_evb
drivers: pwm: add pwm driver support in NPCX7 series
2020-10-06 18:16:02 -05:00
nrf51_ble400
spi-device: set CS gpio flags for all devices that had none
2020-07-09 06:07:07 -05:00
nrf51_blenano
nrf51_vbluno51
nrf51dk_nrf51422
boards: dts: Fix broken link in comment
2020-07-31 09:00:32 -05:00
nrf51dongle_nrf51422
boards: dts: Fix broken link in comment
2020-07-31 09:00:32 -05:00
nrf52_adafruit_feather
boards: dts: Fix broken link in comment
2020-07-31 09:00:32 -05:00
nrf52_blenano2
boards: dts: Fix broken link in comment
2020-07-31 09:00:32 -05:00
nrf52_sparkfun
boards: dts: Fix broken link in comment
2020-07-31 09:00:32 -05:00
nrf52_vbluno52
nrf52dk_nrf52805
boards: nordic: Turn hardware stack protection on by default
2020-09-18 13:48:15 +02:00
nrf52dk_nrf52810
boards: nordic: Turn hardware stack protection on by default
2020-09-18 13:48:15 +02:00
nrf52dk_nrf52832
boards: nordic: Turn hardware stack protection on by default
2020-09-18 13:48:15 +02:00
nrf5340dk_nrf5340
boards: nrf5340: fix default flash partitioning
2020-09-18 09:58:45 -05:00
nrf9160_innblue21
device: Const-ify all device driver instance pointers
2020-09-02 13:48:13 +02:00
nrf9160_innblue22
device: Const-ify all device driver instance pointers
2020-09-02 13:48:13 +02:00
nrf9160dk_nrf9160
boards: nrf9160: fix default flash partitioning
2020-09-18 09:58:45 -05:00
nrf9160dk_nrf52840
boards: nordic: Turn hardware stack protection on by default
2020-09-18 13:48:15 +02:00
nrf21540dk_nrf52840
boards: nordic: Turn hardware stack protection on by default
2020-09-18 13:48:15 +02:00
nrf52832_mdk
boards: dts: Fix broken link in comment
2020-07-31 09:00:32 -05:00
nrf52833dk_nrf52820
boards: nordic: Turn hardware stack protection on by default
2020-09-18 13:48:15 +02:00
nrf52833dk_nrf52833
boards: nordic: Turn hardware stack protection on by default
2020-09-18 13:48:15 +02:00
nrf52840_blip
boards: Move 802.15.4 SOC configuration from Nordic boards to SOCs
2020-08-07 11:56:35 +02:00
nrf52840_mdk
boards: Move 802.15.4 SOC configuration from Nordic boards to SOCs
2020-08-07 11:56:35 +02:00
nrf52840_papyr
boards: Fix obsolete link to flash partition doc
2020-09-15 12:46:01 +02:00
nrf52840dk_nrf52811
boards: nordic: Turn hardware stack protection on by default
2020-09-18 13:48:15 +02:00
nrf52840dk_nrf52840
boards: nordic: Turn hardware stack protection on by default
2020-09-18 13:48:15 +02:00
nrf52840dongle_nrf52840
boards: nrf52840dongle: Enable serial conditionally
2020-09-18 17:54:16 +02:00
nucleo_f030r8
boards/arm: Remove soc compatible from board compatible
2020-09-30 09:54:41 -05:00
nucleo_f070rb
boards/arm: Remove soc compatible from board compatible
2020-09-30 09:54:41 -05:00
nucleo_f091rc
boards/arm: Remove soc compatible from board compatible
2020-09-30 09:54:41 -05:00
nucleo_f103rb
boards: arm: nucleo_f103rb: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
nucleo_f207zg
boards: stm32: Turn hardware stack protection on by default
2020-09-30 10:46:16 -05:00
nucleo_f302r8
boards: arm: nucleo_f302r8: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
nucleo_f303re
boards: stm32: Turn hardware stack protection on by default
2020-09-30 10:46:16 -05:00
nucleo_f334r8
boards: arm: nucleo_f334r8: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
nucleo_f401re
boards: arm: nucleo_f401re: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
nucleo_f411re
boards: stm32: Turn hardware stack protection on by default
2020-09-30 10:46:16 -05:00
nucleo_f412zg
boards: arm: nucleo_f412zg: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
nucleo_f413zh
boards: arm: nucleo_f413zh: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
nucleo_f429zi
boards: arm: nucleo_f429zi: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
nucleo_f446re
boards: stm32: Turn hardware stack protection on by default
2020-09-30 10:46:16 -05:00
nucleo_f746zg
boards: arm: nucleo_f746zg: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
nucleo_f756zg
boards: arm: nucleo_f756zg: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
nucleo_f767zi
boards: arm: nucleo_f767zi: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
nucleo_g071rb
boards: arm: nucleo_g071rb: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
nucleo_g431rb
boards: arm: nucleo_g431rb: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
nucleo_g474re
boards: arm: nucleo_g474re: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
nucleo_h743zi
boards: arm: nucleo_h743zi: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
nucleo_h745zi_q
boards: arm: nucleo_h745zi_q_m7: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
nucleo_l4r5zi
boards: arm: nucleo_l4r5zi: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
nucleo_l053r8
boards/arm: Remove soc compatible from board compatible
2020-09-30 09:54:41 -05:00
nucleo_l073rz
boards/arm: Remove soc compatible from board compatible
2020-09-30 09:54:41 -05:00
nucleo_l152re
boards: stm32: Turn hardware stack protection on by default
2020-09-30 10:46:16 -05:00
nucleo_l432kc
boards: arm: nucleo_l432kc: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
nucleo_l452re
boards: arm: nucleo_l452re: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
nucleo_l476rg
boards: arm: nucleo_l476rg: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
nucleo_l496zg
boards: arm: nucleo_l496zg: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
nucleo_l552ze_q
boards: nucleo_l552ze_q_ns: Use dts flash partitioning.
2020-10-01 15:43:28 +02:00
nucleo_wb55rg
boards: arm: nucleo_wb55rg: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
nuvoton_pfm_m487
board: arm: add support for nuvoton pfm m487
2020-07-01 21:09:25 +02:00
olimex_stm32_e407
boards: stm32: Turn hardware stack protection on by default
2020-09-30 10:46:16 -05:00
olimex_stm32_h103
boards: arm: olimex_stm32_h103: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
olimex_stm32_h407
boards: stm32: Turn hardware stack protection on by default
2020-09-30 10:46:16 -05:00
olimex_stm32_p405
boards: stm32: Turn hardware stack protection on by default
2020-09-30 10:46:16 -05:00
olimexino_stm32
boards: arm: olimexino_stm32: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
particle_argon
device: Const-ify all device driver instance pointers
2020-09-02 13:48:13 +02:00
particle_boron
device: Const-ify all device driver instance pointers
2020-09-02 13:48:13 +02:00
particle_xenon
device: Const-ify all device driver instance pointers
2020-09-02 13:48:13 +02:00
pico_pi_m4
device: Const-ify all device driver instance pointers
2020-09-02 13:48:13 +02:00
pinnacle_100_dvk
boards: add Pinnacle 100 DVK
2020-09-16 14:21:41 -05:00
qemu_cortex_a53
qemu_cortex_a53: Switch to GICv3
2020-10-06 12:53:58 -04:00
qemu_cortex_m0
code-guideline: Fixing code violation 10.4 Rule
2020-10-01 17:13:29 -04:00
qemu_cortex_m3
boards: centralize QEMU icount management
2020-06-24 20:28:36 -04:00
qemu_cortex_r5
boards: centralize QEMU icount management
2020-06-24 20:28:36 -04:00
quick_feather
boards: add EOS S3 Quick Feather board
2020-09-04 14:48:49 -04:00
reel_board
drivers: spi: Kconfig.nrfx: Use RAM buffers for SPIMs by default
2020-09-14 16:02:59 -05:00
ruuvi_ruuvitag
boards: arm: edit ruuvi-ruuvitag
2020-08-07 08:36:36 -05:00
sam4e_xpro
boards: atmel: set BUILD_OUTPUT_HEX for OpenOCD boards
2020-09-17 14:44:21 -05:00
sam4l_ek
boards: arm: atmel: Introduce sam4l_ek board
2020-09-04 16:29:19 -05:00
sam4s_xplained
boards: arm: sam4s_xplained: Add atmel xplained headers
2020-07-13 11:54:29 +02:00
sam_e70_xplained
boards: atmel: Add missing default configuration
2020-09-17 14:44:21 -05:00
sam_v71_xult
boards: atmel: Add missing default configuration
2020-09-17 14:44:21 -05:00
seeeduino_xiao
device: Const-ify all device driver instance pointers
2020-09-02 13:48:13 +02:00
segger_trb_stm32f407
boards: arm: Add support for SEGGER TRB STM32F407
2020-10-06 12:17:26 -04:00
sensortile_box
boards: stm32: Turn hardware stack protection on by default
2020-09-30 10:46:16 -05:00
serpente
tests/samples: add samples for Serpente board
2020-09-04 09:25:02 -05:00
steval_fcu001v1
boards: arm: steval_fcu001v1: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
stm32_min_dev
boards: arm: stm32_min_dev: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
stm32f0_disco
boards/arm: Remove soc compatible from board compatible
2020-09-30 09:54:41 -05:00
stm32f3_disco
boards: arm: stm32f3_disco: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
stm32f4_disco
boards: arm: stm32f4_disco: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
stm32f030_demo
boards/arm: Remove soc compatible from board compatible
2020-09-30 09:54:41 -05:00
stm32f072_eval
boards: arm: stm32 review Joystick polarity and pul up/down
2020-10-02 11:48:32 +02:00
stm32f072b_disco
boards/arm: Remove soc compatible from board compatible
2020-09-30 09:54:41 -05:00
stm32f411e_disco
boards: arm: stm32f411e_disco: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
stm32f412g_disco
boards: arm: stm32 review Joystick polarity and pul up/down
2020-10-02 11:48:32 +02:00
stm32f429i_disc1
boards: stm32: Turn hardware stack protection on by default
2020-09-30 10:46:16 -05:00
stm32f469i_disco
boards: stm32: Turn hardware stack protection on by default
2020-09-30 10:46:16 -05:00
stm32f723e_disco
boards: stm32: Turn hardware stack protection on by default
2020-09-30 10:46:16 -05:00
stm32f746g_disco
boards: arm: stm32f746g_disco: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
stm32f769i_disco
boards: stm32: Turn hardware stack protection on by default
2020-09-30 10:46:16 -05:00
stm32g0316_disco
boards/arm: Remove soc compatible from board compatible
2020-09-30 09:54:41 -05:00
stm32h747i_disco
boards: arm: stm32h747i_disco: wakeup pin is active high
2020-10-02 11:48:32 +02:00
stm32l1_disco
boards/arm: Remove soc compatible from board compatible
2020-09-30 09:54:41 -05:00
stm32l476g_disco
boards: arm: stm32 review Joystick polarity and pul up/down
2020-10-02 11:48:32 +02:00
stm32l496g_disco
boards: arm: stm32l496g_disco: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
stm32mp157c_dk2
boards: stm32: Turn hardware stack protection on by default
2020-09-30 10:46:16 -05:00
stm32vl_disco
boards: arm: stm32vl_disco: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
stm3210c_eval
boards/arm: Remove soc compatible from board compatible
2020-09-30 09:54:41 -05:00
stm32373c_eval
boards: stm32: Turn hardware stack protection on by default
2020-09-30 10:46:16 -05:00
thingy52_nrf52832
boards: nordic: Turn hardware stack protection on by default
2020-09-18 13:48:15 +02:00
twr_ke18f
device: Const-ify all device driver instance pointers
2020-09-02 13:48:13 +02:00
twr_kv58f220m
dts: clocks: kinetis: set pllfll and er32k clock settings from dts
2020-09-29 14:05:50 -05:00
udoo_neo_full_m4
device: Const-ify all device driver instance pointers
2020-09-02 13:48:13 +02:00
usb_kw24d512
dts: clocks: kinetis: set pllfll and er32k clock settings from dts
2020-09-29 14:05:50 -05:00
v2m_beetle
device: Const-ify all device driver instance pointers
2020-09-02 13:48:13 +02:00
v2m_musca
device: Const-ify all device driver instance pointers
2020-09-02 13:48:13 +02:00
v2m_musca_b1
boards: arm: musca_b1: do not offset the image by default by 0x400.
2020-09-22 19:38:51 +02:00
warp7_m4
device: Const-ify all device driver instance pointers
2020-09-02 13:48:13 +02:00
waveshare_open103z
boards: arm: waveshare_open103z: use DT for PWM pinmux configuration
2020-10-07 12:27:37 -05:00
xmc45_relax_kit
boards: arm: xmc45_relax_kit: minor doc fixes
2020-06-02 15:14:45 +02:00
index.rst