Tim Lin 958c79ea5a ite: drivers/i2c: it8xxx2: Don't check bus busy during repeat start ... If the transaction of write to read is divided into two transfers, the second transfer will go to check bus busy and cause i2c reset. This change adds flag to eliminate this situation. Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>		2021-06-04 16:30:45 -05:00
..
slave	drivers: i2c: remove usage of device_pm_control_nop	2021-04-28 10:55:49 -04:00
CMakeLists.txt	drivers: i2c_dw: Remove CMake-based templating	2021-04-21 20:40:52 -04:00
i2c_bitbang.c
i2c_bitbang.h
i2c_cc13xx_cc26xx.c	drivers: cc13xx_cc26xx: fix pm.h not included	2021-06-04 10:24:10 -05:00
i2c_cc32xx.c	drivers: i2c: remove usage of device_pm_control_nop	2021-04-28 10:55:49 -04:00
i2c_common.c
i2c_dw_registers.h	drivers: i2c_dw: Convert to use register for RX/TX buffer depth	2021-03-09 14:16:35 +01:00
i2c_dw.c	drivers: i2c: remove usage of device_pm_control_nop	2021-04-28 10:55:49 -04:00
i2c_dw.h	drivers: i2c_dw: Convert to use register for RX/TX buffer depth	2021-03-09 14:16:35 +01:00
i2c_emul.c	drivers: i2c: remove usage of device_pm_control_nop	2021-04-28 10:55:49 -04:00
i2c_esp32.c	esp32: i2c: fix: fixed error status handling	2021-05-06 13:20:45 -04:00
i2c_gecko.c	drivers: i2c: remove usage of device_pm_control_nop	2021-04-28 10:55:49 -04:00
i2c_gpio.c	drivers: i2c: gpio: fix compilation	2021-06-01 07:27:27 -05:00
i2c_handlers.c
i2c_imx.c	drivers: i2c: remove usage of device_pm_control_nop	2021-04-28 10:55:49 -04:00
i2c_ite_it8xxx2.c	ite: drivers/i2c: it8xxx2: Don't check bus busy during repeat start	2021-06-04 16:30:45 -05:00
i2c_litex.c	drivers: i2c: remove usage of device_pm_control_nop	2021-04-28 10:55:49 -04:00
i2c_ll_stm32_v1.c	drivers/i2c: stm32_v1: remove unused variable	2021-02-15 16:35:30 +03:00
i2c_ll_stm32_v2.c	drivers: i2c_ll_stm32_v2: Add timeout on transfer	2021-03-17 11:34:08 +01:00
i2c_ll_stm32.c	drivers: i2c: remove usage of device_pm_control_nop	2021-04-28 10:55:49 -04:00
i2c_ll_stm32.h
i2c_lpc11u6x.c	drivers: i2c: remove usage of device_pm_control_nop	2021-04-28 10:55:49 -04:00
i2c_lpc11u6x.h
i2c_mchp_xec.c	drivers: i2c: remove usage of device_pm_control_nop	2021-04-28 10:55:49 -04:00
i2c_mcux_flexcomm.c	drivers: i2c: remove usage of device_pm_control_nop	2021-04-28 10:55:49 -04:00
i2c_mcux_lpi2c.c	drivers: i2c: remove usage of device_pm_control_nop	2021-04-28 10:55:49 -04:00
i2c_mcux.c	drivers: i2c: remove usage of device_pm_control_nop	2021-04-28 10:55:49 -04:00
i2c_nios2.c	drivers: i2c: remove usage of device_pm_control_nop	2021-04-28 10:55:49 -04:00
i2c_npcx_controller.c	driver: i2c: npcx: support APB clock of i2c modules up to 20MHz.	2021-05-06 08:15:39 -05:00
i2c_npcx_controller.h	driver: i2c: add i2c support in npcx series.	2020-12-27 18:15:14 +01:00
i2c_npcx_port.c	drivers: i2c: remove usage of device_pm_control_nop	2021-04-28 10:55:49 -04:00
i2c_nrfx_twi.c	pm: device: Align state names with system states	2021-05-07 18:35:12 -04:00
i2c_nrfx_twim.c	pm: device: Align state names with system states	2021-05-07 18:35:12 -04:00
i2c_rv32m1_lpi2c.c	drivers: i2c: remove usage of device_pm_control_nop	2021-04-28 10:55:49 -04:00
i2c_sam0.c	drivers: i2c: remove usage of device_pm_control_nop	2021-04-28 10:55:49 -04:00
i2c_sam4l_twim.c	drivers: i2c: remove usage of device_pm_control_nop	2021-04-28 10:55:49 -04:00
i2c_sam_twi.c	drivers: i2c: remove usage of device_pm_control_nop	2021-04-28 10:55:49 -04:00
i2c_sam_twihs.c	drivers: i2c: remove usage of device_pm_control_nop	2021-04-28 10:55:49 -04:00
i2c_sbcon.c	drivers: i2c: remove usage of device_pm_control_nop	2021-04-28 10:55:49 -04:00
i2c_shell.c
i2c_sifive.c	drivers: i2c: remove usage of device_pm_control_nop	2021-04-28 10:55:49 -04:00
i2c_test.c	drivers: i2c: remove usage of device_pm_control_nop	2021-04-28 10:55:49 -04:00
i2c-priv.h
Kconfig	drivers: i2c: nios2: get IRQ and IRQ priority from DTS	2021-03-03 11:55:03 -06:00
Kconfig.cc13xx_cc26xx
Kconfig.dw	drivers: i2c_dw: Remove CMake-based templating	2021-04-21 20:40:52 -04:00
Kconfig.esp32
Kconfig.gpio
Kconfig.i2c_emul
Kconfig.it8xxx2	drivers: i2c: Add some Kconfig depends	2021-02-14 18:31:55 -05:00
Kconfig.litex
Kconfig.lpc11u6x
Kconfig.npcx	driver: i2c: add i2c support in npcx series.	2020-12-27 18:15:14 +01:00
Kconfig.nrfx
Kconfig.sam0
Kconfig.sbcon
Kconfig.sifive
Kconfig.stm32	drivers: i2c: add support of STM32WL	2021-02-19 22:39:24 -05:00
Kconfig.test	drivers: i2c: add dummy driver for vnd,i2c	2021-02-23 10:34:19 -05:00
Kconfig.xec