Oleh Kravchenko 4f69acc3d4 soc: stm32f1x: Add support for stop/standby modes ... Add config and overlay to samples for testing stop/standby modes: - samples/boards/st/power_mgmt/blinky - samples/boards/st/power_mgmt/wkup_pins I've measured consumption for each low-power mode: - stop (regulator in run mode) ~217 uA - stop (regulator in low-power mode) ~206 uA - standby mode ~3.5 uA Low-power mode wakeup timings from the datasheet, but it barely meets these in reality: - stop (regulator in run mode) 3.6 us - stop (regulator in low-power mode) 5.4 us - standby 50 us It's possible to use RTC as idle timer to exit from stop mode. Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua>		2025-05-20 10:16:20 +02:00
..
96boards
arc_secure_services
bbc	samples: boards: bbc: add microbit_v2 board to pong example	2025-03-07 19:58:05 +01:00
enjoydigital
espressif	samples: boards: espressif: ulp: Add interrupt sample	2025-05-19 11:24:36 +02:00
google
intel
microchip	kscan: drop kscan and any reference	2025-03-13 16:56:26 +00:00
nordic	samples: drivers: Add spis_wakeup sample	2025-04-11 06:33:38 +02:00
nuvoton/numaker/system_off
nxp	style: add missing curly braces in if/while/for statements.	2025-05-17 14:10:33 +02:00
phytec	Bluetooth: Mesh: use secure storage in ble mesh	2025-01-14 13:23:47 +01:00
quicklogic
raspberrypi/rpi_pico/uart_pio
renesas	samples: boards: renesas: Add comparator sample for Renesas	2025-03-13 07:22:00 +01:00
st	soc: stm32f1x: Add support for stop/standby modes	2025-05-20 10:16:20 +02:00
ti	Revert "drivers: gpio_cc13xx_cc26xx: Update for latest sdk"	2025-03-17 13:55:34 +01:00
boards.rst