f087f528f8
Update the board cmake to use xsdb runner, If users would like to use default xsdb.cfg then need to pass the fsbl.elf binary via --fsbl option when using west flash or twister commands. Usage: 1) west flash --runner xsdb --elf-file kv260_r5/zephyr/zephyr.elf --fsbl <path>/fsbl.elf 2) ./scripts/twister -p kv260_r5 --west-runner xsdb --device-testing --device-serial /dev/ttyUSB0 --west-flash="--fsbl=<path>/fsbl.elf" Signed-off-by: Appana Durga Kedareswara rao <appana.durga.kedareswara.rao@amd.com> |
||
|---|---|---|
| .. | ||
| blackmagicprobe.board.cmake | ||
| bossac.board.cmake | ||
| canopen.board.cmake | ||
| dfu-util.board.cmake | ||
| esp32.board.cmake | ||
| ezflashcli.board.cmake | ||
| gd32isp.board.cmake | ||
| jlink.board.cmake | ||
| linkserver.board.cmake | ||
| mdb-hw.board.cmake | ||
| mdb-nsim.board.cmake | ||
| misc.board.cmake | ||
| nios2.board.cmake | ||
| nrfjprog.board.cmake | ||
| nrfutil.board.cmake | ||
| nulink.board.cmake | ||
| nxp_s32dbg.board.cmake | ||
| openocd-nrf5.board.cmake | ||
| openocd.board.cmake | ||
| probe-rs.board.cmake | ||
| pyocd.board.cmake | ||
| renode_robot.board.cmake | ||
| renode.board.cmake | ||
| silabs_commander.board.cmake | ||
| simics.board.cmake | ||
| spi_burn.board.cmake | ||
| stm32cubeprogrammer.board.cmake | ||
| stm32flash.board.cmake | ||
| stub.dts | ||
| teensy.board.cmake | ||
| trace32.board.cmake | ||
| uf2.board.cmake | ||
| xsdb.board.cmake | ||