zephyr/subsys/net/lib/app/init.c
Jukka Rissanen 5e7765ba28 net: app: Setup IEEE 802.15.4 during init
If IEEE 802.15.4 is enabled, then setup the network settings
automatically so that the device is ready for IP configuration.
This is only done if CONFIG_NET_APP_AUTO_INIT is enabled, which
is currently the default.

Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2017-07-20 17:09:27 +03:00

283 lines
6.2 KiB
C

/* init.c */
/*
* Copyright (c) 2017 Intel Corporation.
*
* SPDX-License-Identifier: Apache-2.0
*/
#if defined(CONFIG_NET_DEBUG_APP)
#define SYS_LOG_DOMAIN "net/app"
#define NET_SYS_LOG_LEVEL SYS_LOG_LEVEL_DEBUG
#define NET_LOG_ENABLED 1
#endif
#include <zephyr.h>
#include <init.h>
#include <string.h>
#include <errno.h>
#include <stdlib.h>
#include <net/net_core.h>
#include <net/net_ip.h>
#include <net/net_if.h>
#include <net/dhcpv4.h>
#include <net/net_mgmt.h>
#include <net/dns_resolve.h>
#include <net/net_app.h>
#include "ieee802154_settings.h"
static K_SEM_DEFINE(waiter, 0, 1);
static struct k_sem counter;
#if defined(CONFIG_NET_DHCPV4)
static struct net_mgmt_event_callback mgmt4_cb;
static void ipv4_addr_add_handler(struct net_mgmt_event_callback *cb,
u32_t mgmt_event,
struct net_if *iface)
{
#if defined(CONFIG_NET_DEBUG_APP) && CONFIG_SYS_LOG_NET_LEVEL > 1
char hr_addr[NET_IPV4_ADDR_LEN];
#endif
int i;
if (mgmt_event != NET_EVENT_IPV4_ADDR_ADD) {
return;
}
for (i = 0; i < NET_IF_MAX_IPV4_ADDR; i++) {
struct net_if_addr *if_addr = &iface->ipv4.unicast[i];
if (if_addr->addr_type != NET_ADDR_DHCP || !if_addr->is_used) {
continue;
}
NET_INFO("IPv4 address: %s",
net_addr_ntop(AF_INET, &if_addr->address.in_addr,
hr_addr, NET_IPV4_ADDR_LEN));
NET_INFO("Lease time: %u seconds", iface->dhcpv4.lease_time);
NET_INFO("Subnet: %s",
net_addr_ntop(AF_INET, &iface->ipv4.netmask,
hr_addr, NET_IPV4_ADDR_LEN));
NET_INFO("Router: %s",
net_addr_ntop(AF_INET, &iface->ipv4.gw,
hr_addr, NET_IPV4_ADDR_LEN));
break;
}
k_sem_take(&counter, K_NO_WAIT);
k_sem_give(&waiter);
}
static void setup_dhcpv4(struct net_if *iface)
{
NET_INFO("Running dhcpv4 client...");
net_mgmt_init_event_callback(&mgmt4_cb, ipv4_addr_add_handler,
NET_EVENT_IPV4_ADDR_ADD);
net_mgmt_add_event_callback(&mgmt4_cb);
net_dhcpv4_start(iface);
}
#else
#define setup_dhcpv4(...)
#endif /* CONFIG_NET_DHCPV4 */
#if defined(CONFIG_NET_IPV4) && !defined(CONFIG_NET_DHCPV4)
#if !defined(CONFIG_NET_APP_MY_IPV4_ADDR)
#error "You need to define an IPv4 address or enable DHCPv4!"
#endif
static void setup_ipv4(struct net_if *iface)
{
#if defined(CONFIG_NET_DEBUG_APP) && CONFIG_SYS_LOG_NET_LEVEL > 1
char hr_addr[NET_IPV4_ADDR_LEN];
#endif
struct in_addr addr;
if (net_addr_pton(AF_INET, CONFIG_NET_APP_MY_IPV4_ADDR, &addr)) {
NET_ERR("Invalid address: %s", CONFIG_NET_APP_MY_IPV4_ADDR);
return;
}
net_if_ipv4_addr_add(iface, &addr, NET_ADDR_MANUAL, 0);
NET_INFO("IPv4 address: %s",
net_addr_ntop(AF_INET, &addr, hr_addr, NET_IPV4_ADDR_LEN));
k_sem_take(&counter, K_NO_WAIT);
k_sem_give(&waiter);
}
#else
#define setup_ipv4(...)
#endif /* CONFIG_NET_IPV4 && !CONFIG_NET_DHCPV4 */
#if defined(CONFIG_NET_IPV6)
#if !defined(CONFIG_NET_APP_MY_IPV6_ADDR)
#error "You need to define an IPv6 address!"
#endif
static struct net_mgmt_event_callback mgmt6_cb;
static struct in6_addr laddr;
static void ipv6_event_handler(struct net_mgmt_event_callback *cb,
u32_t mgmt_event, struct net_if *iface)
{
if (mgmt_event == NET_EVENT_IPV6_DAD_SUCCEED) {
#if defined(CONFIG_NET_DEBUG_APP) && CONFIG_SYS_LOG_NET_LEVEL > 1
char hr_addr[NET_IPV6_ADDR_LEN];
#endif
struct net_if_addr *ifaddr;
ifaddr = net_if_ipv6_addr_lookup(&laddr, &iface);
if (!ifaddr ||
!(net_ipv6_addr_cmp(&ifaddr->address.in6_addr, &laddr) &&
ifaddr->addr_state == NET_ADDR_PREFERRED)) {
/* Address is not yet properly setup */
return;
}
NET_INFO("IPv6 address: %s",
net_addr_ntop(AF_INET6, &laddr, hr_addr,
NET_IPV6_ADDR_LEN));
k_sem_take(&counter, K_NO_WAIT);
k_sem_give(&waiter);
}
if (mgmt_event == NET_EVENT_IPV6_ROUTER_ADD) {
k_sem_take(&counter, K_NO_WAIT);
k_sem_give(&waiter);
}
}
static void setup_ipv6(struct net_if *iface, u32_t flags)
{
struct net_if_addr *ifaddr;
u32_t mask = NET_EVENT_IPV6_DAD_SUCCEED;
if (net_addr_pton(AF_INET6, CONFIG_NET_APP_MY_IPV6_ADDR, &laddr)) {
NET_ERR("Invalid address: %s", CONFIG_NET_APP_MY_IPV6_ADDR);
return;
}
if (flags & NET_APP_NEED_ROUTER) {
mask |= NET_EVENT_IPV6_ROUTER_ADD;
}
net_mgmt_init_event_callback(&mgmt6_cb, ipv6_event_handler, mask);
net_mgmt_add_event_callback(&mgmt6_cb);
ifaddr = net_if_ipv6_addr_add(iface, &laddr, NET_ADDR_MANUAL, 0);
if (!ifaddr) {
NET_ERR("Cannot add %s to interface",
CONFIG_NET_APP_MY_IPV6_ADDR);
return;
}
}
#else
#define setup_ipv6(...)
#endif /* CONFIG_NET_IPV6 */
int net_app_init(const char *app_info, u32_t flags, s32_t timeout)
{
#define LOOP_DIVIDER 10
struct net_if *iface = net_if_get_default();
int loop = timeout / LOOP_DIVIDER;
int count = 0;
if (app_info) {
NET_INFO("%s", app_info);
}
if (flags & NET_APP_NEED_IPV6) {
count++;
}
if (flags & NET_APP_NEED_IPV4) {
count++;
}
k_sem_init(&counter, count, UINT_MAX);
setup_ipv4(iface);
setup_dhcpv4(iface);
setup_ipv6(iface, flags);
if (timeout < 0) {
count = -1;
} else if (timeout == 0) {
count = 0;
} else {
count = timeout / 1000 + 1;
}
/* Loop here until until we are ready to continue. As we might need
* to wait multiple events, sleep smaller amounts of data.
*/
while (count--) {
if (k_sem_take(&waiter, loop)) {
if (!k_sem_count_get(&counter)) {
break;
}
}
}
if (!count && timeout) {
NET_ERR("Timeout while waiting setup");
return -ETIMEDOUT;
}
return 0;
}
#if defined(CONFIG_NET_APP_AUTO_INIT)
static int init_net_app(struct device *device)
{
u32_t flags = 0;
int ret;
ARG_UNUSED(device);
#if defined(CONFIG_NET_IPV6)
/* IEEE 802.15.4 is only usable if IPv6 is enabled */
ret = _net_app_ieee802154_setup();
if (ret < 0) {
NET_ERR("Cannot setup IEEE 802.15.4 interface (%d)", ret);
}
#endif
if (IS_ENABLED(CONFIG_NET_APP_NEED_IPV6)) {
flags |= NET_APP_NEED_IPV6;
}
if (IS_ENABLED(CONFIG_NET_APP_NEED_IPV6_ROUTER)) {
flags |= NET_APP_NEED_ROUTER;
}
if (IS_ENABLED(CONFIG_NET_APP_NEED_IPV4)) {
flags |= NET_APP_NEED_IPV4;
}
/* Initialize the application automatically if needed */
ret = net_app_init("Initializing network", flags,
K_SECONDS(CONFIG_NET_APP_INIT_TIMEOUT));
if (ret < 0) {
NET_ERR("Network initialization failed (%d)", ret);
}
return ret;
}
SYS_INIT(init_net_app, APPLICATION, CONFIG_NET_APP_INIT_PRIO);
#endif /* CONFIG_NET_APP_AUTO_INIT */