176d184fb8
When going into DEEP_SLEEP mode, the ARC core now saves its context. This includes: - All core registers - Stack pointer - Program counter (restored by jumping to the restore code) The arc reset code now checks if the GPS0 bit 2 is set. This is similar to the behavior of the x86 core done by the QMSI bootloader which is setting GPS0 bit 1 in order to call the restore path instead of cold boot path. The sample has been adapted in order to support the ARC. Jira: ZEP-1222 Change-Id: I375f03b16b8a5fd1f07ead55cf7e4947d6290c9f Signed-off-by: Julien Delayen <julien.delayen@intel.com>
30 lines
1.5 KiB
Makefile
30 lines
1.5 KiB
Makefile
obj-$(CONFIG_QMSI_BUILTIN) += drivers/flash/qm_flash.o
|
|
ifeq ($(CONFIG_SOC_QUARK_SE_C1000_SS),y)
|
|
obj-$(CONFIG_QMSI_BUILTIN) += drivers/clk/ss_clk.o
|
|
obj-$(CONFIG_QMSI_BUILTIN) += soc/quark_se/drivers/vreg.o
|
|
obj-$(CONFIG_QMSI_BUILTIN) += soc/quark_se/drivers/ss_power_states.o
|
|
endif
|
|
obj-$(CONFIG_QMSI_BUILTIN) += soc/$(patsubst %_ss,%,$(SOC_SERIES))/drivers/power_states.o
|
|
obj-$(CONFIG_QMSI_BUILTIN) += soc/$(patsubst %_ss,%,$(SOC_SERIES))/drivers/clk.o
|
|
ifeq ($(CONFIG_SOC_QUARK_SE_C1000),y)
|
|
obj-$(CONFIG_QMSI_BUILTIN) += soc/$(SOC_SERIES)/drivers/vreg.o
|
|
endif
|
|
obj-$(CONFIG_RTC_QMSI) += drivers/rtc/qm_rtc.o
|
|
obj-$(CONFIG_WDT_QMSI) += drivers/wdt/qm_wdt.o
|
|
obj-$(CONFIG_I2C_QMSI) += drivers/i2c/qm_i2c.o
|
|
obj-$(CONFIG_PWM_QMSI) += drivers/pwm/qm_pwm.o
|
|
obj-$(CONFIG_AIO_COMPARATOR_QMSI) += drivers/comparator/qm_comparator.o
|
|
obj-$(CONFIG_AON_COUNTER_QMSI) += drivers/aon_counters/qm_aon_counters.o
|
|
obj-$(CONFIG_GPIO_QMSI) += drivers/gpio/qm_gpio.o
|
|
obj-$(CONFIG_ADC_QMSI) += drivers/adc/qm_adc.o
|
|
obj-$(CONFIG_UART_QMSI) += drivers/uart/qm_uart.o
|
|
obj-$(CONFIG_DMA_QMSI) += drivers/dma/qm_dma.o
|
|
obj-$(CONFIG_SPI_QMSI) += drivers/spi/qm_spi.o
|
|
obj-$(CONFIG_SOC_FLASH_QMSI) += drivers/flash/qm_flash.o
|
|
obj-$(CONFIG_PINMUX_DEV_QMSI) += drivers/pinmux/qm_pinmux.o
|
|
obj-$(CONFIG_SPI_QMSI_SS) += drivers/spi/qm_ss_spi.o
|
|
obj-$(CONFIG_GPIO_QMSI_SS) += drivers/gpio/qm_ss_gpio.o
|
|
obj-$(CONFIG_I2C_QMSI_SS) += drivers/i2c/qm_ss_i2c.o
|
|
obj-$(CONFIG_ADC_QMSI_SS) += drivers/adc/qm_ss_adc.o
|
|
obj-$(CONFIG_SOC_WATCH) += drivers/soc_watch.o
|