| .. |
|
CMakeLists.txt
|
drivers: gpio: Added support for raspberry pi
|
2022-02-02 16:23:35 +01:00 |
|
gpio_andes_atcgpio100.c
|
drivers: gpio: drop DEV_DATA/DEV_CFG usage
|
2022-01-19 18:16:02 +01:00 |
|
gpio_b91.c
|
drivers: gpio: drop DEV_DATA/DEV_CFG usage
|
2022-01-19 18:16:02 +01:00 |
|
gpio_cc13xx_cc26xx.c
|
drivers: gpio: set all on-chip gpios to PRE_KERNEL_1/2 init
|
2021-12-13 20:31:28 -05:00 |
|
gpio_cc32xx.c
|
drivers: gpio: drop DEV_DATA/DEV_CFG usage
|
2022-01-19 18:16:02 +01:00 |
|
gpio_cmsdk_ahb.c
|
drivers: gpio: set all on-chip gpios to PRE_KERNEL_1/2 init
|
2021-12-13 20:31:28 -05:00 |
|
gpio_cmsdk_ahb.h
|
|
|
|
gpio_creg_gpio.c
|
drivers: gpio: Refactor drivers to use shared init priority
|
2021-11-15 14:38:55 -05:00 |
|
gpio_cy8c95xx.c
|
drivers: gpio: add combined drive strength flags and mask
|
2021-11-11 07:20:12 -05:00 |
|
gpio_dw_registers.h
|
|
|
|
gpio_dw.c
|
pm: s/PM_DEVICE_(DT_(INST))_REF/PM_DEVICE_(DT_(INST))_GET
|
2022-01-18 12:14:06 -05:00 |
|
gpio_dw.h
|
pm: device: remove usage of local states
|
2021-08-04 08:23:01 -04:00 |
|
gpio_emul.c
|
pm: s/PM_DEVICE_(DT_(INST))_REF/PM_DEVICE_(DT_(INST))_GET
|
2022-01-18 12:14:06 -05:00 |
|
gpio_eos_s3.c
|
drivers: gpio: set all on-chip gpios to PRE_KERNEL_1/2 init
|
2021-12-13 20:31:28 -05:00 |
|
gpio_esp32.c
|
drivers: gpio: esp32: check pin number range
|
2022-02-21 22:12:55 -05:00 |
|
gpio_fxl6408.c
|
drivers: gpio: Add fxl6408 driver
|
2021-08-09 13:02:20 -04:00 |
|
gpio_gd32.c
|
drivers: gpio: gd32: initial version
|
2022-01-04 20:49:00 -05:00 |
|
gpio_gecko.c
|
drivers: gpio: Refactor drivers to use shared init priority
|
2021-11-15 14:38:55 -05:00 |
|
gpio_handlers.c
|
|
|
|
gpio_imx.c
|
drivers: gpio: set all on-chip gpios to PRE_KERNEL_1/2 init
|
2021-12-13 20:31:28 -05:00 |
|
gpio_intel.c
|
drivers: gpio: Refactor drivers to use shared init priority
|
2021-11-15 14:38:55 -05:00 |
|
gpio_ite_it8xxx2.c
|
gpio: it8xxx2: open source configuration isn't supported
|
2022-01-05 14:58:22 -05:00 |
|
gpio_litex.c
|
drivers: gpio: Refactor drivers to use shared init priority
|
2021-11-15 14:38:55 -05:00 |
|
gpio_lmp90xxx.c
|
drivers: gpio: revert kconfig init priority for off-chip gpios
|
2021-12-07 09:53:45 -06:00 |
|
gpio_lpc11u6x.c
|
drivers: gpio: drop DEV_DATA/DEV_CFG usage
|
2022-01-19 18:16:02 +01:00 |
|
gpio_mchp_xec_v2.c
|
drivers: gpio: mchp_xec_v2: use instance based macros
|
2021-12-17 17:30:06 +01:00 |
|
gpio_mchp_xec.c
|
drivers: gpio: set all on-chip gpios to PRE_KERNEL_1/2 init
|
2021-12-13 20:31:28 -05:00 |
|
gpio_mcp23s17.c
|
drivers: Apply SPI API change to relevant places
|
2021-11-19 11:50:38 +01:00 |
|
gpio_mcp23s17.h
|
gpio: mcp23s17: convert to spi_dt_spec
|
2021-10-25 09:01:05 -04:00 |
|
gpio_mcp23sxx.c
|
drivers: gpio: mcp23sxx: use instance based macros
|
2021-12-17 17:30:06 +01:00 |
|
gpio_mcp23xxx.c
|
drivers: remove redundant data/config casts
|
2022-01-19 18:16:02 +01:00 |
|
gpio_mcp23xxx.h
|
driver: gpio: mcp23xxx: Refactor to generic.
|
2021-12-08 08:55:28 -05:00 |
|
gpio_mcp230xx.c
|
drivers: avoid i2c_burst_write where possible
|
2021-12-22 12:14:42 +01:00 |
|
gpio_mcux_igpio.c
|
drivers: gpio: Refactor drivers to use shared init priority
|
2021-11-15 14:38:55 -05:00 |
|
gpio_mcux_lpc.c
|
drivers: gpio: Fix NO_PINT_INT
|
2022-01-20 13:40:18 -06:00 |
|
gpio_mcux.c
|
drivers: gpio: Refactor drivers to use shared init priority
|
2021-11-15 14:38:55 -05:00 |
|
gpio_mmio32.c
|
|
|
|
gpio_nct38xx_alert.c
|
drivers: nct38xx: Drop DRV_CONFIG/DRV_DATA usage
|
2022-01-28 10:06:05 +01:00 |
|
gpio_nct38xx_port.c
|
drivers: nct38xx: Drop DRV_CONFIG/DRV_DATA usage
|
2022-01-28 10:06:05 +01:00 |
|
gpio_nct38xx.c
|
drivers: nct38xx: Drop DRV_CONFIG/DRV_DATA usage
|
2022-01-28 10:06:05 +01:00 |
|
gpio_nct38xx.h
|
driver: gpio: nct38xx: Add NCT38XX gpio driver support
|
2021-11-20 08:00:38 -05:00 |
|
gpio_neorv32.c
|
drivers: gpio: set all on-chip gpios to PRE_KERNEL_1/2 init
|
2021-12-13 20:31:28 -05:00 |
|
gpio_npcx.c
|
drivers: npcx: Drop DRV_CONFIG/DRV_DATA usage
|
2022-01-28 10:06:05 +01:00 |
|
gpio_nrfx.c
|
drivers: gpio: nrf: Free channel when pin is reconfigured
|
2022-01-14 12:28:21 +01:00 |
|
gpio_pca95xx.c
|
drivers: gpio: pca95xx: use i2c_dt_spec
|
2022-02-21 22:16:10 -05:00 |
|
gpio_pca953x.c
|
drivers: gpio: add combined drive strength flags and mask
|
2021-11-11 07:20:12 -05:00 |
|
gpio_pcal6408a.c
|
drivers: gpio: add combined drive strength flags and mask
|
2021-11-11 07:20:12 -05:00 |
|
gpio_psoc6.c
|
drivers: gpio: drop DEV_DATA/DEV_CFG usage
|
2022-01-19 18:16:02 +01:00 |
|
gpio_rcar.c
|
drivers: gpio: rcar: drop DEV_DATA/DEV_CFG usage
|
2022-02-21 20:49:41 -05:00 |
|
gpio_rpi_pico.c
|
drivers: gpio: Added support for raspberry pi
|
2022-02-02 16:23:35 +01:00 |
|
gpio_rv32m1.c
|
drivers: gpio: set all on-chip gpios to PRE_KERNEL_1/2 init
|
2021-12-13 20:31:28 -05:00 |
|
gpio_sam0.c
|
drivers: gpio: drop DEV_DATA/DEV_CFG usage
|
2022-01-19 18:16:02 +01:00 |
|
gpio_sam4l.c
|
drivers: gpio: drop DEV_DATA/DEV_CFG usage
|
2022-01-19 18:16:02 +01:00 |
|
gpio_sam.c
|
drivers: gpio: drop DEV_DATA/DEV_CFG usage
|
2022-01-19 18:16:02 +01:00 |
|
gpio_shell.c
|
gpio: shell: Change shell *shell to shell *sh
|
2021-09-28 19:51:33 -04:00 |
|
gpio_sifive.c
|
drivers: gpio: set all on-chip gpios to PRE_KERNEL_1/2 init
|
2021-12-13 20:31:28 -05:00 |
|
gpio_stellaris.c
|
drivers: gpio: drop DEV_DATA/DEV_CFG usage
|
2022-01-19 18:16:02 +01:00 |
|
gpio_stm32.c
|
pm: s/PM_DEVICE_(DT_(INST))_REF/PM_DEVICE_(DT_(INST))_GET
|
2022-01-18 12:14:06 -05:00 |
|
gpio_stm32.h
|
drivers: gpio: stm32: do not expose gpio_stm32_clock_request
|
2021-12-16 10:41:04 +01:00 |
|
gpio_stmpe1600.c
|
drivers: remove redundant data/config casts
|
2022-01-19 18:16:02 +01:00 |
|
gpio_sx1509b.c
|
drivers: gpio: sx1509: use gpio_dt_spec
|
2022-02-21 22:16:10 -05:00 |
|
gpio_test.c
|
drivers: gpio: test driver
|
2022-01-04 09:10:40 -05:00 |
|
gpio_utils.h
|
|
|
|
gpio_xlnx_axi.c
|
drivers: gpio: set all on-chip gpios to PRE_KERNEL_1/2 init
|
2021-12-13 20:31:28 -05:00 |
|
Kconfig
|
drivers: gpio: Added support for raspberry pi
|
2022-02-02 16:23:35 +01:00 |
|
Kconfig.andes_atcgpio100
|
drivers: gpio: add andes atcgpio100 GPIO driver
|
2021-08-30 13:40:14 -04:00 |
|
Kconfig.b91
|
drivers: gpio: introduce new Telink B91 GPIO driver
|
2021-07-21 05:37:12 -04:00 |
|
Kconfig.cc13xx_cc26xx
|
|
|
|
Kconfig.cc32xx
|
|
|
|
Kconfig.cmsdk_ahb
|
|
|
|
Kconfig.creg_gpio
|
drivers: gpio: Refactor drivers to use shared init priority
|
2021-11-15 14:38:55 -05:00 |
|
Kconfig.cy8c95xx
|
|
|
|
Kconfig.dw
|
drivers: gpio: Refactor drivers to use shared init priority
|
2021-11-15 14:38:55 -05:00 |
|
Kconfig.emul
|
gpio: emulated: default Kconfig value
|
2022-01-06 11:56:15 -05:00 |
|
Kconfig.eos_s3
|
|
|
|
Kconfig.esp32
|
drivers: gpio: esp32: use dts and improve code checks
|
2021-10-21 10:53:34 -04:00 |
|
Kconfig.fxl6408
|
drivers: gpio: Add fxl6408 driver
|
2021-08-09 13:02:20 -04:00 |
|
Kconfig.gd32
|
drivers: gpio: gd32: enable gd32vf103
|
2022-01-11 11:50:35 +01:00 |
|
Kconfig.gecko
|
|
|
|
Kconfig.imx
|
|
|
|
Kconfig.intel
|
|
|
|
Kconfig.it8xxx2
|
|
|
|
Kconfig.litex
|
|
|
|
Kconfig.lmp90xxx
|
drivers: gpio: revert kconfig init priority for off-chip gpios
|
2021-12-07 09:53:45 -06:00 |
|
Kconfig.lpc11u6x
|
|
|
|
Kconfig.mcp23s17
|
|
|
|
Kconfig.mcp23xxx
|
driver: gpio: mcp23xxx: Refactor to generic.
|
2021-12-08 08:55:28 -05:00 |
|
Kconfig.mcux
|
|
|
|
Kconfig.mcux_igpio
|
|
|
|
Kconfig.mcux_lpc
|
drivers: gpio: mcux_lpc: Convert driver to use devicetree port prop
|
2021-05-31 17:45:05 +02:00 |
|
Kconfig.mmio32
|
|
|
|
Kconfig.nct38xx
|
driver: gpio: nct38xx: Improve kconfig prompt
|
2021-11-23 13:19:21 -05:00 |
|
Kconfig.neorv32
|
drivers: gpio: add neorv32 gpio driver
|
2021-10-15 09:46:53 -04:00 |
|
Kconfig.npcx
|
|
|
|
Kconfig.nrfx
|
drivers: gpio: nrfx: Use mask to determine if sense is used
|
2021-12-22 12:03:00 +01:00 |
|
Kconfig.pca95xx
|
|
|
|
Kconfig.pca953x
|
drivers: gpio: Add PCA953X driver (gpio port expander)
|
2021-07-31 14:56:34 -04:00 |
|
Kconfig.pcal6408a
|
|
|
|
Kconfig.psoc6
|
|
|
|
Kconfig.rcar
|
drivers: gpio: rcar: set default according to dt enabled
|
2022-01-21 14:25:25 -05:00 |
|
Kconfig.rpi_pico
|
drivers: gpio: Added support for raspberry pi
|
2022-02-02 16:23:35 +01:00 |
|
Kconfig.rv32m1
|
|
|
|
Kconfig.sam
|
soc: arm: atmel_sam: samv71: Fix SPI build dependency
|
2022-01-18 12:12:52 -05:00 |
|
Kconfig.sam0
|
|
|
|
Kconfig.sifive
|
boards: riscv: hifive_unleashed: add GPIO support
|
2022-02-21 20:46:47 -05:00 |
|
Kconfig.stellaris
|
|
|
|
Kconfig.stm32
|
|
|
|
Kconfig.stmpe1600
|
drivers: gpio: add new driver for STMPE1600 gpio expander
|
2021-07-15 19:23:16 -04:00 |
|
Kconfig.sx1509b
|
drivers: gpio: revert kconfig init priority for off-chip gpios
|
2021-12-07 09:53:45 -06:00 |
|
Kconfig.test
|
drivers: gpio: test driver
|
2022-01-04 09:10:40 -05:00 |
|
Kconfig.xec
|
Microchip: MEC172x GPIO driver version 2
|
2021-07-27 18:01:55 -04:00 |
|
Kconfig.xlnx
|
|
|
2c5de11a8b