| .. |
|
adc
|
dts: arm: nxp: rt1180: add lpadc modules
|
2024-09-19 18:16:04 +01:00 |
|
audio
|
drivers: audio: Add the wm8904 driver
|
2024-08-29 15:53:26 +02:00 |
|
auxdisplay
|
|
|
|
bbram
|
|
|
|
bluetooth
|
driver/bluetooth / cyw208xx: enable CYW20829_BT_FW_TX10DBM_POWER
|
2024-09-02 11:58:18 +02:00 |
|
cache
|
Revert "drivers: cache: nrf: enable CACHE_NRF_PATCH_LINEADDR for nRF92"
|
2024-09-09 13:54:39 -04:00 |
|
can
|
style: drivers: adjust return usage in void functions
|
2024-09-18 09:56:16 +02:00 |
|
charger
|
charger: bq25180: Add threshold voltage for precharge
|
2024-09-05 17:01:05 -04:00 |
|
clock_control
|
drivers: clock_control: Add MCUX SCG K4 driver
|
2024-09-20 15:14:11 -05:00 |
|
console
|
drivers: console: rtt_console: use Segger recommended write API
|
2024-08-12 10:14:34 +02:00 |
|
coredump
|
|
|
|
counter
|
drivers: counter: Specify _POSIX_C_SOURCE when native_sim
|
2024-09-19 15:13:57 +02:00 |
|
crypto
|
drivers: crypto: use reset api for crypto peripheral reset
|
2024-07-28 07:31:25 +03:00 |
|
dac
|
drivers: dac: add checks for internal channel config
|
2024-09-17 05:23:56 -04:00 |
|
dai
|
driver: ssp: add support for blob30 on PTL
|
2024-09-13 09:17:56 +02:00 |
|
disk
|
drivers: stm32: Select PINCTRL when required
|
2024-09-03 14:40:55 +01:00 |
|
display
|
drivers: display: ili9xxx: read mipi-mode, only use SPI mode as fallback
|
2024-09-20 11:56:22 -05:00 |
|
dma
|
drivers: dma: dma_nxp_edma: support 64-bit TCD
|
2024-09-19 18:02:42 -04:00 |
|
dp
|
|
|
|
edac
|
|
|
|
eeprom
|
drivers/eeprom/eeprom_simulator: Remove reference to native_posix
|
2024-08-16 09:20:58 +01:00 |
|
entropy
|
entropy: native_posix: Add kconfig to not seed by default
|
2024-09-05 16:56:33 -04:00 |
|
espi
|
drivers/espi: it8xxx2: Fix mask when SRAM size not the power of 2
|
2024-09-02 11:49:52 +02:00 |
|
ethernet
|
drivers: ethernet: Modify RX thread creation and update KConfig
|
2024-09-16 20:19:16 +02:00 |
|
firmware
|
style: drivers: comply with MISRA C:2012 Rule 15.6
|
2024-09-11 07:40:35 -04:00 |
|
flash
|
drivers: flash: cc13xx_cc26xx: Add support of write to flash from flash
|
2024-09-18 15:32:09 +02:00 |
|
fpga
|
style: drivers: adjust return usage in void functions
|
2024-09-18 09:56:16 +02:00 |
|
fuel_gauge
|
style: drivers: comply with MISRA C:2012 Rule 15.6
|
2024-09-11 07:40:35 -04:00 |
|
gnss
|
gnss: rename u-blox M10 driver to M8
|
2024-08-26 17:27:12 -04:00 |
|
gpio
|
drivers: gpio: stm32: Fix compiler warning
|
2024-09-17 14:58:57 -04:00 |
|
haptics
|
drivers: haptics: drv2605: Hard codes open loop mode for LRA mode
|
2024-08-20 14:52:32 -04:00 |
|
hwinfo
|
drivers: hwinfo: stm32: mark STM32WB0 series as incompatible
|
2024-09-12 10:03:37 +02:00 |
|
hwspinlock
|
style: drivers: comply with MISRA C:2012 Rule 15.6
|
2024-09-11 07:40:35 -04:00 |
|
i2c
|
drivers/i2c: it8xxx2: Add a property for maximum time allowed I2C transfer
|
2024-09-18 19:56:43 +01:00 |
|
i2s
|
drivers: i2s: esp32: remove unused code
|
2024-09-17 09:10:51 -05:00 |
|
i3c
|
style: drivers: adjust return usage in void functions
|
2024-09-18 09:56:16 +02:00 |
|
ieee802154
|
drivers: ieee802154: mcr20a: Specify the dependency on HAL_MCUX
|
2024-09-19 15:14:06 +02:00 |
|
input
|
drivers: input: input_gt911: fix OOB buffer write to touch points array
|
2024-09-06 10:13:14 -05:00 |
|
interrupt_controller
|
drivers: intc: shared_irq: change init and isr function to static
|
2024-09-19 18:28:58 +01:00 |
|
ipm
|
drivers: esp32: Interrupts flags configuration
|
2024-08-22 14:25:25 -04:00 |
|
kscan
|
kscan: mark the kscan driver class as deprecated
|
2024-09-17 14:52:50 -04:00 |
|
led
|
drivers: led: lp5562: Add PM Device support
|
2024-09-13 13:43:33 +02:00 |
|
led_strip
|
drivers: ws2812_gpio: Make timing configurable and less hardware dependend
|
2024-09-06 11:31:00 -04:00 |
|
lora
|
lora: driver: sx12xx: fix driver recv func when RX error occurs
|
2024-08-05 18:37:11 -04:00 |
|
mbox
|
drivers: mbox: mbox_esp32: fix mbox callback call
|
2024-09-19 03:25:57 -04:00 |
|
mdio
|
drivers: ethernet: dwc_xgmac: Added dwc-xgmac
|
2024-09-05 17:03:05 -04:00 |
|
memc
|
drivers: stm32: Select PINCTRL when required
|
2024-09-03 14:40:55 +01:00 |
|
mfd
|
|
|
|
mipi_dbi
|
drivers: mipi_dbi: add support for parallel 8080/6800 modes using GPIO
|
2024-09-20 11:56:22 -05:00 |
|
mipi_dsi
|
|
|
|
misc
|
drivers: misc: coresight: nrf_etr: Add standalone mode
|
2024-09-06 11:31:27 -04:00 |
|
mm
|
Revert "ace: mm: tlb: Check tlb translation enabled before flushing cache"
|
2024-09-18 15:30:03 +02:00 |
|
modem
|
lib: net_buf: rename header file from zephyr/net/buf.h to zephyr/net_buf.h
|
2024-09-07 11:19:05 -05:00 |
|
mspi
|
drivers: update AMBIQ drivers to use proper base address
|
2024-08-11 19:18:09 -05:00 |
|
net
|
lib: net_buf: rename header file from zephyr/net/buf.h to zephyr/net_buf.h
|
2024-09-07 11:19:05 -05:00 |
|
pcie
|
|
|
|
peci
|
|
|
|
pinctrl
|
drivers: kinetis-pinctrl: Account for SCG K4
|
2024-09-20 15:14:11 -05:00 |
|
pm_cpu_ops
|
|
|
|
power_domain
|
style: drivers: comply with MISRA C:2012 Rule 15.6
|
2024-09-11 07:40:35 -04:00 |
|
ps2
|
style: drivers: comply with MISRA C:2012 Rule 15.6
|
2024-09-11 07:40:35 -04:00 |
|
ptp_clock
|
drivers: ptp_clock_nxp_enet: add module_dev to driver config
|
2024-07-09 17:20:12 -04:00 |
|
pwm
|
boards: remove CONFIG_PINCTRL from defconfig files of FE310-based boards
|
2024-09-20 13:14:41 +02:00 |
|
regulator
|
espressif: clean up unused code
|
2024-09-09 13:55:39 -04:00 |
|
reset
|
|
|
|
retained_mem
|
drivers: retained_mem: nrf: implement using nrfx_ram_ctrl helper
|
2024-08-14 12:35:17 -04:00 |
|
rtc
|
style: drivers: comply with MISRA C:2012 Rule 15.6
|
2024-09-11 07:40:35 -04:00 |
|
sdhc
|
drivers: sdhc: esp32: remove unused code
|
2024-09-16 20:18:33 +02:00 |
|
sensor
|
drivers: sensors: fix compile error due to conflicting types.
|
2024-09-17 14:57:32 -04:00 |
|
serial
|
boards: remove CONFIG_PINCTRL from defconfig files of FE310-based boards
|
2024-09-20 13:14:41 +02:00 |
|
sip_svc
|
|
|
|
smbus
|
drivers: stm32: Make some config symbols menuconfig symbols
|
2024-09-05 16:58:04 -04:00 |
|
spi
|
boards: remove CONFIG_PINCTRL from defconfig files of FE310-based boards
|
2024-09-20 13:14:41 +02:00 |
|
stepper
|
drivers: stepper: refactor gpio stepper driver
|
2024-09-03 10:42:19 +02:00 |
|
syscon
|
|
|
|
tee
|
style: drivers: comply with MISRA C:2012 Rule 15.6
|
2024-09-11 07:40:35 -04:00 |
|
timer
|
driver: timer: Add support for sy1xx
|
2024-09-16 20:19:31 +02:00 |
|
usb
|
drivers: usb: udc_dwc2: Restrict TxFIFO to SPRAM size
|
2024-09-18 15:30:45 +02:00 |
|
usb_c
|
drivers: stm32: Select PINCTRL when required
|
2024-09-03 14:40:55 +01:00 |
|
video
|
drivers: video: gc2145: fixes the prefix
|
2024-09-17 20:10:31 -04:00 |
|
virtualization
|
|
|
|
w1
|
|
|
|
watchdog
|
style: drivers: comply with MISRA C:2012 Rule 15.6
|
2024-09-11 07:40:35 -04:00 |
|
wifi
|
drivers: wifi: nrfwifi: determine shared iovdd and bucken from dt
|
2024-09-19 18:27:36 +01:00 |
|
xen
|
style: drivers: comply with MISRA C:2012 Rule 15.6
|
2024-08-20 10:33:51 +02:00 |
|
CMakeLists.txt
|
stepper motor controller: introduce api
|
2024-08-27 12:43:39 +02:00 |
|
Kconfig
|
stepper motor controller: introduce api
|
2024-08-27 12:43:39 +02:00 |
2db9ea94de