zephyr/dts/bindings
Marcin Niestroj 668cbe19a3 drivers: wifi: esp: support power-gpios to enable ESP module
Add power-gpios device-tree binding property to power on module before
communicating with it. This pin is called CHIP_PU in case of ESP32{,-S2}
and CHIP_EN in case of ESP8266. Dedicated reset pin is available only on
the latter, however Espressif recommends (in ESP8266 Hardware Design
Guidelines) to use CHIP_EN instead. Follow those recommendations and use
power-gpios to reset chip if that is provided over device-tree.

Configure power-gpios and reset-gpios as inactive by default, so that
chip becomes ready after executing esp_reset() function, either if one
or both are provided over device-tree.

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
2020-10-20 07:32:01 -05:00
..
adc drivers: adc: stm32: add support for pinmux 2020-10-14 07:15:12 -05:00
arc
arm dts: clocks: kinetis: set pllfll and er32k clock settings from dts 2020-09-29 14:05:50 -05:00
audio
base dts: bindings: move io-channels and io-channel-names to base.yaml 2020-10-02 11:50:30 +02:00
bluetooth
can drivers: can: stm32: add support for pinmux 2020-10-13 13:13:08 +02:00
clock dts: Clock control for RT600, LPC54xxx, LPC55xxx 2020-10-15 11:17:24 -05:00
cpu dts: bindings: add devicetree binding for the ARM Cortex-M1 CPU 2020-08-14 13:35:39 -05:00
crypto dts: nrf5340_cpuapp: add cryptocell node 2020-05-21 20:09:44 +02:00
dac drivers: dac: stm32: add support for pinmux 2020-10-12 08:49:36 -05:00
display drivers: ssd1306: Add SPI support 2020-10-02 11:33:26 +02:00
dma MXRT600: Add DMA support 2020-08-28 14:24:21 -05:00
ec_host_cmd_perhip ec_host_cmd_periph: add device API 2020-09-04 14:50:45 -04:00
espi drivers: espi: add host sub-modules support for NPCX7 series. 2020-10-02 11:33:15 +02:00
ethernet drivers: eth: add driver for w5500 Ethernet Controller 2020-10-02 11:34:57 +02:00
flash_controller drivers/flash: Add support for flash_get_parameters to drivers 2020-06-22 14:35:03 +02:00
gpio dts/bindings: Update gpio-controller to add additionl properties 2020-10-07 14:33:27 -05:00
hwinfo dts: hwinfo: Add atmel sam4l unique serial number 2020-09-04 16:29:19 -05:00
i2c drivers/i2c: stm32: Add pinctrl configuration at driver init 2020-10-09 11:52:59 +02:00
i2s drivers: i2s: Add LiteX I2S controller driver 2020-08-26 08:17:42 -04:00
ieee802154 drivers: ieee802154: add Decawave DW1000 driver 2020-05-07 23:30:58 -05:00
iio/adc drivers: adc: added support adc driver for lpcexpresso55s69 2020-10-12 14:59:40 -05:00
interrupt-controller driver: intc: add MIWU driver support in NPCX series. 2020-09-01 13:35:25 +02:00
ipm dts: Add binding for IPM console 2020-09-04 07:55:52 -04:00
kscan drivers: kscan: generalize and improve FT5336 driver 2020-08-12 12:35:04 +02:00
led dts: add binding for TI LP503x LED controllers 2020-08-28 15:04:35 +02:00
led_strip drivers: led_strip: modernize and fix up ws2812 drivers/sample 2020-02-05 12:00:36 +01:00
lora drivers: lora: sx126x: Support software-managed RF switches 2020-09-04 12:36:53 +02:00
memory-controllers
mhu
misc
mmc dts: bindings: st,stm32-sdmmc: remove unneeded type 2020-05-08 17:49:32 +02:00
mmu_mpu dts: arm: Add binding for armv6m mpu 2020-04-17 15:17:43 +02:00
modem drivers: modem: hl7800: fix dts binding 2020-09-16 14:21:41 -05:00
mtd drivers: flash: Add sector-size property to at45.yaml 2020-09-04 11:58:22 +02:00
pcie/endpoint dts: bindings: Add binding for iProc PCIe EP node 2020-06-13 01:35:19 -07:00
peci dts: peci: Add dts bindings for PECI 2020-03-13 18:53:04 +02:00
phy
pinctrl dts/bindings/pinctrl: Remove usage of c comments within bindings 2020-10-02 08:36:26 -05:00
power
ps2 dts: microchip,xec-ps2: Add properties for GIRQ info 2020-03-11 07:59:38 -06:00
pwm drivers: pwm: stm32: add support for pinmux 2020-10-07 12:27:37 -05:00
riscv
rng dts: nxp,lpc-rng binding and lpc55xxx RNG node 2020-05-07 23:25:31 -05:00
rtc dts: add pit as counter 2020-08-21 14:27:59 -05:00
sensor drivers/sensor: add support to IIS2ICLX accelerometer 2020-10-15 09:57:47 -05:00
serial drivers: serial: stm32: set default parity in driver 2020-10-15 04:01:22 -05:00
spi drivers/spi: stm32: Convert to devicetree pinctrl generation 2020-10-19 10:24:01 -05:00
sram
tach dts: bindings: tach: Add nodes and bindings for tachometer 2020-03-13 08:49:21 -05:00
test include/devicetree.h: Add DT_ENUM_IDX_OR macro 2020-10-05 10:15:32 -05:00
timer dts: stm32: timer define a new DT binding for LPTIM 2020-05-29 14:13:05 +02:00
usb usb: audio: Correct typos in USB audio bindings. 2020-07-14 13:03:04 +02:00
video
watchdog drivers: watchdog: gecko: Add support for Gecko Series 2 SoC 2020-08-06 11:49:16 +02:00
wifi drivers: wifi: esp: support power-gpios to enable ESP module 2020-10-20 07:32:01 -05:00
vendor-prefixes.txt boards: arm: Add support for SEGGER TRB STM32F407 2020-10-06 12:17:26 -04:00